The component of a machining center that supports the workpiece and any
workholding devices during machining. The worktable is often used as a base from
which to calculate tool length offsets.
Give this one a try later!
worktable
An offset that accounts for variations in tool length along the Z axis. Tool length
offsets must be calculated for each tool.
Give this one a try later!
tool length offsets
, A method for locating a CNC machine's home position. The homing procedure must
be completed upon starting up a CNC machine that has been fully shut down unless
that machine has a reference return button.
Give this one a try later!
homing procedure
MCU. A small, powerful computer that controls and operates a CNC machine.
Machine control units can be used to store offsets.
Give this one a try later!
machine control unit
The path the tool takes to complete a part. The toolpath is defined by the part
program.
Give this one a try later!
toolpath
CNC. A sophisticated machining device that uses a computer to carry out machining
operations. ___ ___ ___ machine tools are much more sophisticated than their manual
counterparts.
Give this one a try later!
workholding devices during machining. The worktable is often used as a base from
which to calculate tool length offsets.
Give this one a try later!
worktable
An offset that accounts for variations in tool length along the Z axis. Tool length
offsets must be calculated for each tool.
Give this one a try later!
tool length offsets
, A method for locating a CNC machine's home position. The homing procedure must
be completed upon starting up a CNC machine that has been fully shut down unless
that machine has a reference return button.
Give this one a try later!
homing procedure
MCU. A small, powerful computer that controls and operates a CNC machine.
Machine control units can be used to store offsets.
Give this one a try later!
machine control unit
The path the tool takes to complete a part. The toolpath is defined by the part
program.
Give this one a try later!
toolpath
CNC. A sophisticated machining device that uses a computer to carry out machining
operations. ___ ___ ___ machine tools are much more sophisticated than their manual
counterparts.
Give this one a try later!
