WITH 100% VERIFIED ANSWERS AND DETAILED EXPLANATIONS
Course: Ohio Fire Alarm System Installation & Maintenance
Number: 200 Questions
Edition: 2026/2027
Question 1
According to NFPA 72, what is the maximum allowable time delay for a
fire alarm signal transmission to a supervising station?
A) 30 seconds
B) 60 seconds
C) 90 seconds
D) 120 seconds
Correct Answer: C
Rationale: NFPA 72 requires that fire alarm signals be transmitted to a
supervising station within 90 seconds of activation. This ensures rapid
notification of emergency responders and minimizes response time to
protect life and property.
Question 2
Which of the following is a required component of a fire alarm system
in an Ohio Group E occupancy?
,A) Automatic smoke detection in corridors
B) Manual pull stations at each exit
C) Sprinkler flow switches
D) Heat detectors in all classrooms
Correct Answer: A
Rationale: The Ohio Fire Code requires automatic smoke detection in
corridors serving Group E occupancies to provide early warning of
smoke conditions in egress paths, ensuring children can evacuate safely.
Question 3
What is the minimum sound pressure level required for audible
notification appliances in sleeping areas according to NFPA 72?
A) 65 dBA
B) 70 dBA
C) 75 dBA
D) 80 dBA
Correct Answer: C
Rationale: NFPA 72 requires audible notification appliances in sleeping
areas to produce a minimum sound pressure level of 75 dBA at the
pillow level to effectively awaken occupants during an emergency.
Question 4
Who has the authority to grant variances from the Ohio Fire Code
requirements for fire alarm systems?
,A) The building owner
B) The fire alarm contractor
C) The local Authority Having Jurisdiction
D) The State Fire Marshal
Correct Answer: D
Rationale: The Ohio State Fire Marshal has the exclusive authority to
grant variances from the Ohio Fire Code. Local AHJs cannot grant
variances that conflict with state code requirements.
Question 5
What is the primary purpose of a fire alarm control panel's trouble
signal?
A) To indicate a fire condition
B) To indicate a system malfunction or fault
C) To indicate a sprinkler activation
D) To indicate low battery in smoke detectors
Correct Answer: B
Rationale: A trouble signal on a fire alarm control panel indicates a
system malfunction, fault, or abnormal condition that requires attention
to ensure the system remains operational for fire detection.
Question 6
How often must fire alarm systems in Ohio healthcare occupancies be
tested under state amendments?
, A) Monthly
B) Quarterly
C) Semiannually
D) Annually
Correct Answer: C
Rationale: Ohio amendments to NFPA 72 require semiannual testing of
fire alarm systems in healthcare occupancies to ensure the highest level
of reliability for patients who may be incapable of self-preservation.
Question 7
Which type of detector is most appropriate for protecting an area
where dust or fumes are expected to be present?
A) Photoelectric smoke detector
B) Ionization smoke detector
C) Heat detector
D) Beam smoke detector
Correct Answer: C
Rationale: Heat detectors are less susceptible to nuisance alarms from
dust and fumes compared to smoke detectors. They are appropriate for
environments where these conditions are common.
Question 8
What is the required maximum spacing for smoke detectors on smooth
ceilings according to NFPA 72?