AUTOCAD CORE EXAM SET 2026/2027 QUESTIONS AND
SOLUTIONS RATED A+
✔✔To open a crossing window: - ✔✔Pick points right to left
✔✔Objects on the same layer need not be the same color. - ✔✔True
✔✔AutoCAD's default color system is: - ✔✔Index
✔✔You can only drawing in one color on one layer. - ✔✔False
✔✔Pick a new layer from the Layer list on the ribbon, pick a new layer in the Layer
Properties Manager and pick the Set Current button, pick the Make Object's Layer
Current tool from the ribbon and pick an object on the new current layer are three ways
to change the current layer. - ✔✔True
✔✔To access other linetypes you must load them from the ACAD linetype file, or
another file containing linetype definitions. - ✔✔True
✔✔You can zoom but not pan with the scroll wheel. - ✔✔False
✔✔Which linetype is loaded by default: - ✔✔Continuous
✔✔The continuous linetype is always available once added to the drawing. - ✔✔False
✔✔Which of these cannot be accomplished using the layer drop-down list: - ✔✔create
new layers
✔✔How many layers can you create in AutoCAD: - ✔✔As many as you like
✔✔Start point, width, and rotation angle values must be specified before entering text? -
✔✔False
✔✔It is necessary to match layers and color numbers - ✔✔False
✔✔Which is not entered when you create single-line text: - ✔✔Text color
✔✔You picked the freeze/thaw icon which caused this, when you return to your drawing
you find that some objects are no longer visible. - ✔✔False
✔✔Linetypes need to be loaded, but colors do not. - ✔✔True
✔✔Any drawing may be saved as a template drawing. - ✔✔True
, ✔✔By default the COPY command creates multiple copies of selected objects -
✔✔True
✔✔Rows are horizontal, columns are vertical. - ✔✔True
✔✔The Action Recorder duplicates the function of the ARRAY command. - ✔✔False
✔✔It is usually unnecessary to perform a full plot preview. - ✔✔False
✔✔To facilitate creating new drawings from a previous drawing - ✔✔Save it in the
Template folder
✔✔In the MOVE command, after defining a selection set - ✔✔Define a displacement
vector
✔✔In Grip editing, you can select objects by - ✔✔Typing L for last
✔✔To remove grips - ✔✔Press <Esc>
✔✔To access the grip edit short cut menu - ✔✔Right click after selecting objects
✔✔Which of the five settings that would typically be included in a template drawing is
not listed below? - ✔✔Line
✔✔It is not possible to plot a landscape oriented plot on a printer. - ✔✔False
✔✔AutoCAD will not send a plot to a printer or plotter if the drawing limits exceed the
sheet size. - ✔✔True
✔✔Polar arrays can defined around circles or arcs. - ✔✔False
✔✔In order to define an arc, you must first specify a start point. - ✔✔False
✔✔To define a polar array, AutoCAD needs an angle to fill, a number of items, and
angle between the items. - ✔✔False
✔✔Which of these is not required to define a polar array? - ✔✔Start point
✔✔Which of the following is always specified in defining an arc? - ✔✔Start point
✔✔You are rotating an object from 45° degrees to 30° degrees, you have entered the
reference option. The reference angle will be - ✔✔45°
SOLUTIONS RATED A+
✔✔To open a crossing window: - ✔✔Pick points right to left
✔✔Objects on the same layer need not be the same color. - ✔✔True
✔✔AutoCAD's default color system is: - ✔✔Index
✔✔You can only drawing in one color on one layer. - ✔✔False
✔✔Pick a new layer from the Layer list on the ribbon, pick a new layer in the Layer
Properties Manager and pick the Set Current button, pick the Make Object's Layer
Current tool from the ribbon and pick an object on the new current layer are three ways
to change the current layer. - ✔✔True
✔✔To access other linetypes you must load them from the ACAD linetype file, or
another file containing linetype definitions. - ✔✔True
✔✔You can zoom but not pan with the scroll wheel. - ✔✔False
✔✔Which linetype is loaded by default: - ✔✔Continuous
✔✔The continuous linetype is always available once added to the drawing. - ✔✔False
✔✔Which of these cannot be accomplished using the layer drop-down list: - ✔✔create
new layers
✔✔How many layers can you create in AutoCAD: - ✔✔As many as you like
✔✔Start point, width, and rotation angle values must be specified before entering text? -
✔✔False
✔✔It is necessary to match layers and color numbers - ✔✔False
✔✔Which is not entered when you create single-line text: - ✔✔Text color
✔✔You picked the freeze/thaw icon which caused this, when you return to your drawing
you find that some objects are no longer visible. - ✔✔False
✔✔Linetypes need to be loaded, but colors do not. - ✔✔True
✔✔Any drawing may be saved as a template drawing. - ✔✔True
, ✔✔By default the COPY command creates multiple copies of selected objects -
✔✔True
✔✔Rows are horizontal, columns are vertical. - ✔✔True
✔✔The Action Recorder duplicates the function of the ARRAY command. - ✔✔False
✔✔It is usually unnecessary to perform a full plot preview. - ✔✔False
✔✔To facilitate creating new drawings from a previous drawing - ✔✔Save it in the
Template folder
✔✔In the MOVE command, after defining a selection set - ✔✔Define a displacement
vector
✔✔In Grip editing, you can select objects by - ✔✔Typing L for last
✔✔To remove grips - ✔✔Press <Esc>
✔✔To access the grip edit short cut menu - ✔✔Right click after selecting objects
✔✔Which of the five settings that would typically be included in a template drawing is
not listed below? - ✔✔Line
✔✔It is not possible to plot a landscape oriented plot on a printer. - ✔✔False
✔✔AutoCAD will not send a plot to a printer or plotter if the drawing limits exceed the
sheet size. - ✔✔True
✔✔Polar arrays can defined around circles or arcs. - ✔✔False
✔✔In order to define an arc, you must first specify a start point. - ✔✔False
✔✔To define a polar array, AutoCAD needs an angle to fill, a number of items, and
angle between the items. - ✔✔False
✔✔Which of these is not required to define a polar array? - ✔✔Start point
✔✔Which of the following is always specified in defining an arc? - ✔✔Start point
✔✔You are rotating an object from 45° degrees to 30° degrees, you have entered the
reference option. The reference angle will be - ✔✔45°
