AUTOCAD MAIN EXAMINATION SET 2026/2027
QUESTIONS AND SOLUTIONS RATED A+
✔✔In the MOVE command, after defining a selection set - ✔✔Define a displacement
vector
✔✔In Grip editing, you can select objects by - ✔✔Typing L for last
✔✔To remove grips - ✔✔Press <Esc>
✔✔To access the grip edit short cut menu - ✔✔Right click after selecting objects
✔✔Which of the five settings that would typically be included in a template drawing is
not listed below? - ✔✔Line
✔✔It is not possible to plot a landscape oriented plot on a printer. - ✔✔False
✔✔AutoCAD will not send a plot to a printer or plotter if the drawing limits exceed the
sheet size. - ✔✔True
✔✔Polar arrays can defined around circles or arcs. - ✔✔False
✔✔In order to define an arc, you must first specify a start point. - ✔✔False
✔✔To define a polar array, AutoCAD needs an angle to fill, a number of items, and
angle between the items. - ✔✔False
✔✔Which of these is not required to define a polar array? - ✔✔Start point
✔✔Which of the following is always specified in defining an arc? - ✔✔Start point
✔✔You are rotating an object from 45° degrees to 30° degrees, you have entered the
reference option. The reference angle will be - ✔✔45°
✔✔The Continue option will begin an arc - ✔✔Tangent to the last arc drawn
✔✔Polar Tracking can be set to track - ✔✔At any angle
✔✔Like incremental snap, object snap will not interfere with ordinary point selection. -
✔✔False
✔✔In using the TRIM command trimmed objects may also serve as cutting edges. -
✔✔True
, ✔✔In the Stretch grip edit mode and the STRETCH command it is necessary to select
objects with a crossing window. - ✔✔False
✔✔AutoCAD layouts are always created in paper space. - ✔✔True
✔✔To initiate a single point object snap: - ✔✔Enter an object snap mode when
AutoCAD prompts for point selection
✔✔To access the object snap short cut menu: - ✔✔Right-click when AutoCAD prompts
for point selection
✔✔An acquired point will be: - ✔✔Marked with a small orange cross
✔✔In paper space, the typical plot scale is: - ✔✔1:1
✔✔To coordinate layout scales with viewport scales use: - ✔✔Zoom XP
✔✔Objects can be scaled from different base points with different results. - ✔✔True
✔✔Mtext is drawn within a rectangular box defined by the user. - ✔✔False
✔✔Fields can be updated each time a file is opened. - ✔✔True
✔✔Center-justified text and middle-justified text are two names for the same thing. -
✔✔False
✔✔Fonts are created based on text styles. - ✔✔False
✔✔To enter single line text you must first enter all of these except : - ✔✔alignment
✔✔To enter multiline text, pick the multiline text tool and then: - ✔✔enter two points
✔✔TEXTEDIT can be used to change: - ✔✔text content
✔✔AutoCAD borders and title blocks can be found : - ✔✔in the template folder
✔✔MATCHPROP cannot be used to match: - ✔✔text height
✔✔By default, dimension style units are the same as drawing units. - ✔✔False
✔✔The default dimension style is annotative. - ✔✔False
QUESTIONS AND SOLUTIONS RATED A+
✔✔In the MOVE command, after defining a selection set - ✔✔Define a displacement
vector
✔✔In Grip editing, you can select objects by - ✔✔Typing L for last
✔✔To remove grips - ✔✔Press <Esc>
✔✔To access the grip edit short cut menu - ✔✔Right click after selecting objects
✔✔Which of the five settings that would typically be included in a template drawing is
not listed below? - ✔✔Line
✔✔It is not possible to plot a landscape oriented plot on a printer. - ✔✔False
✔✔AutoCAD will not send a plot to a printer or plotter if the drawing limits exceed the
sheet size. - ✔✔True
✔✔Polar arrays can defined around circles or arcs. - ✔✔False
✔✔In order to define an arc, you must first specify a start point. - ✔✔False
✔✔To define a polar array, AutoCAD needs an angle to fill, a number of items, and
angle between the items. - ✔✔False
✔✔Which of these is not required to define a polar array? - ✔✔Start point
✔✔Which of the following is always specified in defining an arc? - ✔✔Start point
✔✔You are rotating an object from 45° degrees to 30° degrees, you have entered the
reference option. The reference angle will be - ✔✔45°
✔✔The Continue option will begin an arc - ✔✔Tangent to the last arc drawn
✔✔Polar Tracking can be set to track - ✔✔At any angle
✔✔Like incremental snap, object snap will not interfere with ordinary point selection. -
✔✔False
✔✔In using the TRIM command trimmed objects may also serve as cutting edges. -
✔✔True
, ✔✔In the Stretch grip edit mode and the STRETCH command it is necessary to select
objects with a crossing window. - ✔✔False
✔✔AutoCAD layouts are always created in paper space. - ✔✔True
✔✔To initiate a single point object snap: - ✔✔Enter an object snap mode when
AutoCAD prompts for point selection
✔✔To access the object snap short cut menu: - ✔✔Right-click when AutoCAD prompts
for point selection
✔✔An acquired point will be: - ✔✔Marked with a small orange cross
✔✔In paper space, the typical plot scale is: - ✔✔1:1
✔✔To coordinate layout scales with viewport scales use: - ✔✔Zoom XP
✔✔Objects can be scaled from different base points with different results. - ✔✔True
✔✔Mtext is drawn within a rectangular box defined by the user. - ✔✔False
✔✔Fields can be updated each time a file is opened. - ✔✔True
✔✔Center-justified text and middle-justified text are two names for the same thing. -
✔✔False
✔✔Fonts are created based on text styles. - ✔✔False
✔✔To enter single line text you must first enter all of these except : - ✔✔alignment
✔✔To enter multiline text, pick the multiline text tool and then: - ✔✔enter two points
✔✔TEXTEDIT can be used to change: - ✔✔text content
✔✔AutoCAD borders and title blocks can be found : - ✔✔in the template folder
✔✔MATCHPROP cannot be used to match: - ✔✔text height
✔✔By default, dimension style units are the same as drawing units. - ✔✔False
✔✔The default dimension style is annotative. - ✔✔False
