BICSI Practice Test-RETAKE/ Exam Questions with
Verified Solutions/ Rated A+
1. The two main considerations concerning the existing cabling
are:
A) Cable color and length
B) Grandfathered system and abandoned cable
C) Cable type and connector type
D) Installation date and manufacturer
Answer: B
Rationale: When dealing with existing cabling, the two main
considerations are the grandfathered system (existing cabling that
may not meet current standards but is allowed to remain) and
abandoned cable (cable that is no longer in use and must be
removed). This is addressed in BICSI TDMM section 11-25 .
1
,2. The type of cutover where cross-connects are relocated one
pair after another until completed is called a:
A) Hot cut
B) Rolling cut
C) Swing cut
D) Parallel cut
Answer: B
Rationale: A rolling cut is a cutover method where cross-connects
are relocated one pair at a time until the entire transition is
complete. This method minimizes service disruption. This is covered
in BICSI TDMM section 11-28 .
3. Which practice involves moving the customer to a temporary
office space until their section of the retrofit is completed and
then moving them back to their recabled office space?
A) Rolling cut
B) Hot cut
2
,C) Swing space phasing
D) Parallel cut
Answer: C
Rationale: Swing space phasing involves relocating occupants to
temporary office space while their area is being retrofitted, then
moving them back once the work is complete. This approach
minimizes disruption to the customer's operations .
4. A ________ will leave the customer momentarily without
communications:
A) Rolling cut
B) Hot cut
C) Swing space phasing
D) Parallel cut
Answer: B
Rationale: A hot cut involves disconnecting the customer's existing
service and immediately connecting to the new service, resulting in
3
, a momentary loss of communications. This is addressed in BICSI
TDMM section 11-28 .
5. During a ________, cross-connects are relocated one pair
after another until completed:
A) Hot cut
B) Swing cut
C) Rolling cut
D) Parallel cut
Answer: C
Rationale: A rolling cut is characterized by relocating cross-
connects one pair or circuit at a time until the entire process is
complete. This method is less disruptive than a hot cut .
6. A ________ provides a quick graphical representation of how
the circuit is laid out:
A) CLR
4
Verified Solutions/ Rated A+
1. The two main considerations concerning the existing cabling
are:
A) Cable color and length
B) Grandfathered system and abandoned cable
C) Cable type and connector type
D) Installation date and manufacturer
Answer: B
Rationale: When dealing with existing cabling, the two main
considerations are the grandfathered system (existing cabling that
may not meet current standards but is allowed to remain) and
abandoned cable (cable that is no longer in use and must be
removed). This is addressed in BICSI TDMM section 11-25 .
1
,2. The type of cutover where cross-connects are relocated one
pair after another until completed is called a:
A) Hot cut
B) Rolling cut
C) Swing cut
D) Parallel cut
Answer: B
Rationale: A rolling cut is a cutover method where cross-connects
are relocated one pair at a time until the entire transition is
complete. This method minimizes service disruption. This is covered
in BICSI TDMM section 11-28 .
3. Which practice involves moving the customer to a temporary
office space until their section of the retrofit is completed and
then moving them back to their recabled office space?
A) Rolling cut
B) Hot cut
2
,C) Swing space phasing
D) Parallel cut
Answer: C
Rationale: Swing space phasing involves relocating occupants to
temporary office space while their area is being retrofitted, then
moving them back once the work is complete. This approach
minimizes disruption to the customer's operations .
4. A ________ will leave the customer momentarily without
communications:
A) Rolling cut
B) Hot cut
C) Swing space phasing
D) Parallel cut
Answer: B
Rationale: A hot cut involves disconnecting the customer's existing
service and immediately connecting to the new service, resulting in
3
, a momentary loss of communications. This is addressed in BICSI
TDMM section 11-28 .
5. During a ________, cross-connects are relocated one pair
after another until completed:
A) Hot cut
B) Swing cut
C) Rolling cut
D) Parallel cut
Answer: C
Rationale: A rolling cut is characterized by relocating cross-
connects one pair or circuit at a time until the entire process is
complete. This method is less disruptive than a hot cut .
6. A ________ provides a quick graphical representation of how
the circuit is laid out:
A) CLR
4
