CSPT Exam #1 with all Correct & 100% Verified Answers |
Actual Complete Exam |Already Graded A+
A patient is to receive 1 L of D5/0.45 NS with 20 mEq solution over 24 hours. What is the flow
rate? ✔Correct Answer-42ml/hr
What is a critical site? ✔Correct Answer-An area exposed to air or touch, such as a vial,
needle, or ampule.
What direction does air flow in a horizontal laminar airflow hood? ✔Correct Answer-From the
back of the hood to the front
How often is electronic sampling of viable particles required to be performed and documented
according to USP <797> ? ✔Correct Answer-Every 6 months
A total of 500 ml of ringer's lactate is to be infused over 8 hours; how should it be labeled on
the IV bag? ✔Correct Answer-62.5 ml/hr
Prior to preparing a hazardous CSP, how many pair(s) of powder-free gloves should be worn by a
technician preparing and IV admixture? ✔Correct Answer-Two
Before compounding a sterile product, how long must a laminar airflow hood be on?
✔Correct Answer-30 minutes
After using a syringe to compound a sterile product, where would a pharmacy technician
dispose of it? ✔Correct Answer-In a sharps container
How often must a pharmacy technician who handles hazardous drugs receive competency
training? ✔Correct Answer-Every 12 months
What is the flow rate of 1 L of NS to be over 8 hr? ✔Correct Answer-125 ml/hr
Which pharmacy standards must be adhered to when compounding a sterile product ?
✔Correct Answer-USP <797>
How many inches inside a laminar airflow hood should a technician prepare a sterile product?
✔Correct Answer-6 inches
USP <797> requires that hands, fingernails, wrists and up to the elbows be washed for a
minimum of ? ✔Correct Answer-30 seconds
Which of following needles has the smallest diameter?
, 16 gauge
18 gauge
25 gauge
31 gauge ✔Correct Answer-31 gauge
How many drops per milliliter does a mini- drip system provide? ✔Correct Answer-60 gtt/ml
When compounding a hazardous medication for injection, what PEC would be used?
✔Correct Answer-A biologic safety cabinet
Which of the following is used to remove water-soluble residues found in the sterile
compounding area?
USP purified water
IPA 70%
IPA 95%
Clorox ✔Correct Answer-USP purified water
How quickly must a multidose container be used after opening it? ✔Correct Answer-28 days
What is a universal precaution? ✔Correct Answer-An infection control principle that requires
a health care provider to treat human blood as infectious.
Which of the following medications is an example of hazardous waste?
heparin
hydrocodone
insulin
epinephrine ✔Correct Answer-epinephrine
Gentamicin 120mg in 100ml D5W is administers over 30 min every 8 hours with a 10 drop kit.
What will be the rate be? ✔Correct Answer-33gtts/min
What volume does a small-volume parenteral contain? ✔Correct Answer-100 ml or less
Why is a gauze swab used when opening a glass ampule? ✔Correct Answer-To protect your
hands from cuts
What should be done when preparing a prescription for etoposide? ✔Correct Answer-Prepare
it in a biological safety cabinet
What part of the laminar flow hood is responsible for removing contaminants? ✔Correct
Answer-HEPA filter
Actual Complete Exam |Already Graded A+
A patient is to receive 1 L of D5/0.45 NS with 20 mEq solution over 24 hours. What is the flow
rate? ✔Correct Answer-42ml/hr
What is a critical site? ✔Correct Answer-An area exposed to air or touch, such as a vial,
needle, or ampule.
What direction does air flow in a horizontal laminar airflow hood? ✔Correct Answer-From the
back of the hood to the front
How often is electronic sampling of viable particles required to be performed and documented
according to USP <797> ? ✔Correct Answer-Every 6 months
A total of 500 ml of ringer's lactate is to be infused over 8 hours; how should it be labeled on
the IV bag? ✔Correct Answer-62.5 ml/hr
Prior to preparing a hazardous CSP, how many pair(s) of powder-free gloves should be worn by a
technician preparing and IV admixture? ✔Correct Answer-Two
Before compounding a sterile product, how long must a laminar airflow hood be on?
✔Correct Answer-30 minutes
After using a syringe to compound a sterile product, where would a pharmacy technician
dispose of it? ✔Correct Answer-In a sharps container
How often must a pharmacy technician who handles hazardous drugs receive competency
training? ✔Correct Answer-Every 12 months
What is the flow rate of 1 L of NS to be over 8 hr? ✔Correct Answer-125 ml/hr
Which pharmacy standards must be adhered to when compounding a sterile product ?
✔Correct Answer-USP <797>
How many inches inside a laminar airflow hood should a technician prepare a sterile product?
✔Correct Answer-6 inches
USP <797> requires that hands, fingernails, wrists and up to the elbows be washed for a
minimum of ? ✔Correct Answer-30 seconds
Which of following needles has the smallest diameter?
, 16 gauge
18 gauge
25 gauge
31 gauge ✔Correct Answer-31 gauge
How many drops per milliliter does a mini- drip system provide? ✔Correct Answer-60 gtt/ml
When compounding a hazardous medication for injection, what PEC would be used?
✔Correct Answer-A biologic safety cabinet
Which of the following is used to remove water-soluble residues found in the sterile
compounding area?
USP purified water
IPA 70%
IPA 95%
Clorox ✔Correct Answer-USP purified water
How quickly must a multidose container be used after opening it? ✔Correct Answer-28 days
What is a universal precaution? ✔Correct Answer-An infection control principle that requires
a health care provider to treat human blood as infectious.
Which of the following medications is an example of hazardous waste?
heparin
hydrocodone
insulin
epinephrine ✔Correct Answer-epinephrine
Gentamicin 120mg in 100ml D5W is administers over 30 min every 8 hours with a 10 drop kit.
What will be the rate be? ✔Correct Answer-33gtts/min
What volume does a small-volume parenteral contain? ✔Correct Answer-100 ml or less
Why is a gauze swab used when opening a glass ampule? ✔Correct Answer-To protect your
hands from cuts
What should be done when preparing a prescription for etoposide? ✔Correct Answer-Prepare
it in a biological safety cabinet
What part of the laminar flow hood is responsible for removing contaminants? ✔Correct
Answer-HEPA filter
