TTT1 Exam Questions With Complete Solutions
A Capstan hoist should be inspected __________ before use?
Correct Answers Daily
A hoist should be designed to withstand a minimum of
__________, which is the maximum intended line pull. Correct
Answers 2 times
A vertical life line should have a minimum breaking strength of
how many pounds? Correct Answers 5,000 lbs
According the regulations and standards, there are two levels of
maximum Permissible Exposure. Which group is allowed the
highest level of exposure? Correct Answers Industry Workers
According to industry standards, the minimum height from a
lower surface or ground where fall protection must be used is:
Correct Answers 6 feet
All cranes must be inspected __________ by a competent
person before use Correct Answers Daily
An antenna that can transmit a signal up to 360 degrees is called
_________. Correct Answers Omni-Directioinal
An operator uses the following equipment: Correct Answers
Winches, Cranes, and other applicable units
, An overhaul ball provides what function in operations? Correct
Answers Provides weight allowing the load line to return to the
ground
At which direction do you install ground rods for a tower?
Correct Answers Parallel with the tower
Can you splice a synthetic sling? Correct Answers Yes,
according to the manufacturer
Demolition work is a rigging class __________? Correct
Answers 4
Exposure to nonionizing radiation does what to the human
body? Correct Answers Does not permanently change cells
How do you demolition a tower? Correct Answers Explosive
How is fiber connected to the tower? Correct Answers Rubber
grommets and 1 5/8" snap ins
How long is a fire watch for welding? Correct Answers 30
minutes
How many ground rods are required on a site? Correct Answers
3
How many hoisting grips should be installed on a 400' tower?
Correct Answers 2
How many slings can you put on a shackle? Correct Answers 4
A Capstan hoist should be inspected __________ before use?
Correct Answers Daily
A hoist should be designed to withstand a minimum of
__________, which is the maximum intended line pull. Correct
Answers 2 times
A vertical life line should have a minimum breaking strength of
how many pounds? Correct Answers 5,000 lbs
According the regulations and standards, there are two levels of
maximum Permissible Exposure. Which group is allowed the
highest level of exposure? Correct Answers Industry Workers
According to industry standards, the minimum height from a
lower surface or ground where fall protection must be used is:
Correct Answers 6 feet
All cranes must be inspected __________ by a competent
person before use Correct Answers Daily
An antenna that can transmit a signal up to 360 degrees is called
_________. Correct Answers Omni-Directioinal
An operator uses the following equipment: Correct Answers
Winches, Cranes, and other applicable units
, An overhaul ball provides what function in operations? Correct
Answers Provides weight allowing the load line to return to the
ground
At which direction do you install ground rods for a tower?
Correct Answers Parallel with the tower
Can you splice a synthetic sling? Correct Answers Yes,
according to the manufacturer
Demolition work is a rigging class __________? Correct
Answers 4
Exposure to nonionizing radiation does what to the human
body? Correct Answers Does not permanently change cells
How do you demolition a tower? Correct Answers Explosive
How is fiber connected to the tower? Correct Answers Rubber
grommets and 1 5/8" snap ins
How long is a fire watch for welding? Correct Answers 30
minutes
How many ground rods are required on a site? Correct Answers
3
How many hoisting grips should be installed on a 400' tower?
Correct Answers 2
How many slings can you put on a shackle? Correct Answers 4
