CAPSTONE PROCTORED MODULE 3
ATI QUIZ 90 QUESTIONS AND
ANSWERS 2026 VERIFIED A+
◉ Safe Practices.
Answer: Personal Fall Arrest System - There is a hoisting area without
guardrails
Equipment Guards - Workers are working four feet above paving
equipment
Fences - An eight-foot-deep hole is hidden by overgrown grasses.
Warning Line and Safety Monitoring Systems - Roofers are working on
low-slope roofs with unprotected sides
Hardhats and Barricades - Workers may be hit by falling tools and
materials
◉ Numbers to Remember.
Answer: 1. Guardrail systems must be able to withstand a force of at
least 200 lbs at any point along the top edge
2. For pipe railings, posts shall be spaced not more than 8 feet apart on
centers
3. A safety net's maximum mesh openings must not be longer than 6
inches on any side
4. Top rails must be 42 inches, plus or minus 3 inches, above the
walking/working level
5. Intermediate members such as balusters, when used between posts,
shall not be more than 19 inches apart
, 6. Safety net drop-tests must consist of a 400 lbs bag of sand being
dropped into the net.
7. Safety net systems must be no more than 30 feet below the working
surface
8. If safety nets are connected together, the connection must be as strong
as the individual nets and not more than 6 inches apart
9. A Personal Fall Arrest System (PFAS) must be rigged so that an
employee can neither free-fall more than 6 feet, nor contact any lower
level
◉ Fall Protection Preparation.
Answer: 1. Develop a written fall protection plan and train employees in
fall protection safety
2. Assess potential fall hazards prior to each project
3. Use administrative controls to eliminate hazards by changing or
rescheduling tasks
4. Inspect fall protection equipment to ensure its condition and
appropriateness
5. Before starting work, remind employees of specific fall hazards that
are present on the job site
6. Once work has begun, observe workers to ensure that fall protection
equipment is being used properly
◉ Toe boards shall be capable of withstanding, without failure, a force
of at least ____ applied in any downward or outward direction at any
point along the toeboard.
Answer: 50 pounds
ATI QUIZ 90 QUESTIONS AND
ANSWERS 2026 VERIFIED A+
◉ Safe Practices.
Answer: Personal Fall Arrest System - There is a hoisting area without
guardrails
Equipment Guards - Workers are working four feet above paving
equipment
Fences - An eight-foot-deep hole is hidden by overgrown grasses.
Warning Line and Safety Monitoring Systems - Roofers are working on
low-slope roofs with unprotected sides
Hardhats and Barricades - Workers may be hit by falling tools and
materials
◉ Numbers to Remember.
Answer: 1. Guardrail systems must be able to withstand a force of at
least 200 lbs at any point along the top edge
2. For pipe railings, posts shall be spaced not more than 8 feet apart on
centers
3. A safety net's maximum mesh openings must not be longer than 6
inches on any side
4. Top rails must be 42 inches, plus or minus 3 inches, above the
walking/working level
5. Intermediate members such as balusters, when used between posts,
shall not be more than 19 inches apart
, 6. Safety net drop-tests must consist of a 400 lbs bag of sand being
dropped into the net.
7. Safety net systems must be no more than 30 feet below the working
surface
8. If safety nets are connected together, the connection must be as strong
as the individual nets and not more than 6 inches apart
9. A Personal Fall Arrest System (PFAS) must be rigged so that an
employee can neither free-fall more than 6 feet, nor contact any lower
level
◉ Fall Protection Preparation.
Answer: 1. Develop a written fall protection plan and train employees in
fall protection safety
2. Assess potential fall hazards prior to each project
3. Use administrative controls to eliminate hazards by changing or
rescheduling tasks
4. Inspect fall protection equipment to ensure its condition and
appropriateness
5. Before starting work, remind employees of specific fall hazards that
are present on the job site
6. Once work has begun, observe workers to ensure that fall protection
equipment is being used properly
◉ Toe boards shall be capable of withstanding, without failure, a force
of at least ____ applied in any downward or outward direction at any
point along the toeboard.
Answer: 50 pounds
