MILLWRIGHT TEST PRACTICE 1 | COMPLETE QUESTIONS WITH
100% RATED EXPERT SOLUTIONS |2026 LATEST UPDATED
Other than scraping what other uses can a three-sided scraper be used for? - (answer)Deburr
Holes
What is a cape nose chisel used for? - (answer)Cut grooves such as keyways
What should you do with the end of chisels and punches that have "mushroomed" over? -
(answer)Grind it back to shape on grinder
What is the proper name for the tool that holds a threading die? - (answer)Die Stock
Why do dies have adjustable screws in them? - (answer)To compress split die
What is "draw filing"? - (answer)Used to produce a smooth flat surface on the workpiece. It
removes file marks and scratches left by cross filing
Which way do the teeth face on a hacksaw? - (answer)Away from the handle
, How do you protect a finished part from being damaged in the jaws of a bench vise? -
(answer)Vise Jaw Caps
How are hammers classified? - (answer)Hard/Soft Faced, and by weight
What are the three basic designs of screwdrivers? - (answer)Standard, Stubby and Offset
What is the difference between a drift and a pin punch? - (answer)A drift punch chases pins or
rods, a pin punch is used in the assembly and dismantling of split or roll pins.
What are the six grades of files? - (answer)Single, Double, Bastard, Second, Smooth (Cut)
What tap would you use to put a thread to the bottom of a blind hole? - (answer)Bottoming tap
What are solid dies or die nuts used for? - (answer)Used for chasing or re-cutting damaged
threads.
How would you remove a broken tap from a hole? - (answer)Tap extractor, drilling, acid, tap
disintegrators.
100% RATED EXPERT SOLUTIONS |2026 LATEST UPDATED
Other than scraping what other uses can a three-sided scraper be used for? - (answer)Deburr
Holes
What is a cape nose chisel used for? - (answer)Cut grooves such as keyways
What should you do with the end of chisels and punches that have "mushroomed" over? -
(answer)Grind it back to shape on grinder
What is the proper name for the tool that holds a threading die? - (answer)Die Stock
Why do dies have adjustable screws in them? - (answer)To compress split die
What is "draw filing"? - (answer)Used to produce a smooth flat surface on the workpiece. It
removes file marks and scratches left by cross filing
Which way do the teeth face on a hacksaw? - (answer)Away from the handle
, How do you protect a finished part from being damaged in the jaws of a bench vise? -
(answer)Vise Jaw Caps
How are hammers classified? - (answer)Hard/Soft Faced, and by weight
What are the three basic designs of screwdrivers? - (answer)Standard, Stubby and Offset
What is the difference between a drift and a pin punch? - (answer)A drift punch chases pins or
rods, a pin punch is used in the assembly and dismantling of split or roll pins.
What are the six grades of files? - (answer)Single, Double, Bastard, Second, Smooth (Cut)
What tap would you use to put a thread to the bottom of a blind hole? - (answer)Bottoming tap
What are solid dies or die nuts used for? - (answer)Used for chasing or re-cutting damaged
threads.
How would you remove a broken tap from a hole? - (answer)Tap extractor, drilling, acid, tap
disintegrators.
