TCFP FIRE INSPECTOR EXAM | ACTUAL EXAM 110
QUESTIONS AND CORRECT ANSWERS (100%
VERIFIED ANSWERS) | A+ GRADE | 2026 EDITION
Instant Download PDF
CORE DOMAINS COVERED:
1. Fire Codes and Standards - NFPA, IFC, Local Amendments, ICC codes
2. Building Construction and Structural Components - Types, fire resistance,
building materials
3. Fire Protection Systems - Sprinklers, standpipes, extinguishers, suppression
systems
4. Fire Detection, Alarm, and Communication Systems - Detectors, notification,
supervision
5. Means of Egress and Occupant Load Calculations - Exits, corridors, stairs,
occupant load
6. Hazardous Materials and Flammable/Combustible Liquids - Storage, handling,
labeling
7. Inspection Procedures, Plans Review, and Permits - Inspection techniques,
documentation
8. Life Safety and Occupancy Classifications - Occupancy types, use groups,
special hazards
9. Fire Safety Education and Community Risk Reduction - Public education,
outreach
10. Professional Ethics, Legal Responsibilities, and Report Writing - Legal aspects,
ethics, reporting
EXAM QUESTIONS
,1. According to the IFC, how often must high-hazard occupancies be inspected?
A. Monthly
B. Every 6 months
C. Annually
D. Every 24 months
Correct Answer: B
Rationale: The IFC requires inspections of high-hazard occupancies every 6 months due to
the elevated risk of fire or explosion associated with the building.
2. What is the minimum required width for an exit access corridor in an office
building with an occupant load of 80 persons per floor?
A. 28 inches
B. 36 inches
C. 44 inches
D. 72 inches
Correct Answer: C
Rationale: For occupant loads of 50 or more, the IBC/IFC requires a corridor width of 44
inches (0.3 inches per person for 80 persons per floor) but 44 inches is the minimum width
for corridors serving 50 or more.
3. A fire inspector observes a fire door that does not fully close under its own power.
The corrective action is to:
A. Place a wedge under the door to keep it open for ventilation
B. Document the deficiency, notify the owner, and require immediate action to ensure
positive latching
C. Remove the door entirely as it is an obstruction
D. Increase the fire load in the room to compensate
Correct Answer: B
Rationale: Fire-rated doors must be self-closing and self-latching to maintain
compartmentation. Deficiencies must be recorded and corrected promptly.
,4. Which NFPA standard governs the installation of sprinkler systems?
A. NFPA 10
B. NFPA 13
C. NFPA 72
D. NFPA 101
Correct Answer: B
Rationale: NFPA 13 is the standard for the installation of sprinkler systems. NFPA 10
covers portable fire extinguishers, NFPA 72 covers fire alarm systems, and NFPA 101 is the
Life Safety Code.
5. What is the maximum travel distance to a fire extinguisher in a business
occupancy?
A. 50 feet
B. 75 feet
C. 100 feet
D. 150 feet
Correct Answer: B
Rationale: NFPA 10 requires that the maximum travel distance to a fire extinguisher in
business occupancies is 75 feet for Class A hazards and 50 feet for Class B hazards.
6. Which occupancy classification includes buildings used for the production or
processing of materials that present a moderate fire hazard?
A. Group A
B. Group B
C. Group F
D. Group S
Correct Answer: C
, Rationale: Group F (Factory/Industrial) occupancies include buildings used for production
or processing that present a moderate fire hazard. Group A is assembly, Group B is
business, and Group S is storage.
7. A fire inspector finds that a fire alarm control panel has a trouble signal. What is
the most appropriate initial action?
A. Silence the alarm and continue the inspection
B. Reset the panel and continue the inspection
C. Investigate the cause of the trouble signal
D. Notify the fire department immediately
Correct Answer: C
Rationale: Trouble signals indicate system malfunctions. Investigating the cause is
essential to ensure the system is operational.
8. Which NFPA standard is known as the Life Safety Code?
A. NFPA 13
B. NFPA 70
C. NFPA 101
D. NFPA 1
Correct Answer: C
Rationale: NFPA 101 is the Life Safety Code, covering means of egress, fire protection,
and life safety features.
9. What is the minimum required clearance between a sprinkler head and stored
materials?
A. 12 inches
B. 18 inches
C. 24 inches
D. 36 inches
Correct Answer: B
QUESTIONS AND CORRECT ANSWERS (100%
VERIFIED ANSWERS) | A+ GRADE | 2026 EDITION
Instant Download PDF
CORE DOMAINS COVERED:
1. Fire Codes and Standards - NFPA, IFC, Local Amendments, ICC codes
2. Building Construction and Structural Components - Types, fire resistance,
building materials
3. Fire Protection Systems - Sprinklers, standpipes, extinguishers, suppression
systems
4. Fire Detection, Alarm, and Communication Systems - Detectors, notification,
supervision
5. Means of Egress and Occupant Load Calculations - Exits, corridors, stairs,
occupant load
6. Hazardous Materials and Flammable/Combustible Liquids - Storage, handling,
labeling
7. Inspection Procedures, Plans Review, and Permits - Inspection techniques,
documentation
8. Life Safety and Occupancy Classifications - Occupancy types, use groups,
special hazards
9. Fire Safety Education and Community Risk Reduction - Public education,
outreach
10. Professional Ethics, Legal Responsibilities, and Report Writing - Legal aspects,
ethics, reporting
EXAM QUESTIONS
,1. According to the IFC, how often must high-hazard occupancies be inspected?
A. Monthly
B. Every 6 months
C. Annually
D. Every 24 months
Correct Answer: B
Rationale: The IFC requires inspections of high-hazard occupancies every 6 months due to
the elevated risk of fire or explosion associated with the building.
2. What is the minimum required width for an exit access corridor in an office
building with an occupant load of 80 persons per floor?
A. 28 inches
B. 36 inches
C. 44 inches
D. 72 inches
Correct Answer: C
Rationale: For occupant loads of 50 or more, the IBC/IFC requires a corridor width of 44
inches (0.3 inches per person for 80 persons per floor) but 44 inches is the minimum width
for corridors serving 50 or more.
3. A fire inspector observes a fire door that does not fully close under its own power.
The corrective action is to:
A. Place a wedge under the door to keep it open for ventilation
B. Document the deficiency, notify the owner, and require immediate action to ensure
positive latching
C. Remove the door entirely as it is an obstruction
D. Increase the fire load in the room to compensate
Correct Answer: B
Rationale: Fire-rated doors must be self-closing and self-latching to maintain
compartmentation. Deficiencies must be recorded and corrected promptly.
,4. Which NFPA standard governs the installation of sprinkler systems?
A. NFPA 10
B. NFPA 13
C. NFPA 72
D. NFPA 101
Correct Answer: B
Rationale: NFPA 13 is the standard for the installation of sprinkler systems. NFPA 10
covers portable fire extinguishers, NFPA 72 covers fire alarm systems, and NFPA 101 is the
Life Safety Code.
5. What is the maximum travel distance to a fire extinguisher in a business
occupancy?
A. 50 feet
B. 75 feet
C. 100 feet
D. 150 feet
Correct Answer: B
Rationale: NFPA 10 requires that the maximum travel distance to a fire extinguisher in
business occupancies is 75 feet for Class A hazards and 50 feet for Class B hazards.
6. Which occupancy classification includes buildings used for the production or
processing of materials that present a moderate fire hazard?
A. Group A
B. Group B
C. Group F
D. Group S
Correct Answer: C
, Rationale: Group F (Factory/Industrial) occupancies include buildings used for production
or processing that present a moderate fire hazard. Group A is assembly, Group B is
business, and Group S is storage.
7. A fire inspector finds that a fire alarm control panel has a trouble signal. What is
the most appropriate initial action?
A. Silence the alarm and continue the inspection
B. Reset the panel and continue the inspection
C. Investigate the cause of the trouble signal
D. Notify the fire department immediately
Correct Answer: C
Rationale: Trouble signals indicate system malfunctions. Investigating the cause is
essential to ensure the system is operational.
8. Which NFPA standard is known as the Life Safety Code?
A. NFPA 13
B. NFPA 70
C. NFPA 101
D. NFPA 1
Correct Answer: C
Rationale: NFPA 101 is the Life Safety Code, covering means of egress, fire protection,
and life safety features.
9. What is the minimum required clearance between a sprinkler head and stored
materials?
A. 12 inches
B. 18 inches
C. 24 inches
D. 36 inches
Correct Answer: B
