TFM 11 STUDY EXAMS GUIDE ALL QUESTIONS
AND ANSWERS SURE A+
✔✔When must the three installation inspections be performed? - ✔✔-1- At the
completion of the device back box but prior to #2
- 2- At the completion of the device cable installation but prior to #3
- 3- At the completion of the device installation but prior to activation
✔✔What is the purpose of fire alarm plans and record drawings tag? - ✔✔To certify that
the plan or finished drawing of a fire system meets all codes and standards
✔✔What five things should it say on the installation label? - ✔✔-DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firms name address telephone and registration number
-Installation date and licensee signature and license number
-The name of whoever planned the system
, ✔✔What five things should it say on the RESIDENTIAL installation label? - ✔✔-DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firm's name address telephone and registration number
-Installation date and licensee signature and license number
-An inscription certifying the install meets code
✔✔When and where must the installation labels be placed? - ✔✔Inside the control
panel cover or in a permanent location
✔✔When must a service label be used? - ✔✔After any service that has corrected and
issue that was noted on a yellow or red label
✔✔What does the licensee signature on a service label mean? - ✔✔The signature of
the license on the service label certifies that the service performed complies with
requirements.
✔✔How long must a service label stay in place? - ✔✔Two years. An agent of the Fire
Marshall may remove it at any time.
✔✔If a system is resulting in a fault condition a _____ label should be placed with black
lettering on the outside of the control panel or in a permanent location. - ✔✔Red
✔✔If after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a ________ label should be placed with black
lettering on the outside of the control panel or in a permanent location. - ✔✔Yellow
Label
✔✔What six things must be listed on a Service Label? - ✔✔-DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE MARSHALL SERVICE RECORD
-The firm's name address telephone and registration number
-Service date and licensee signature and license number
-A list of services performed
-Type of service - either general service or a correction of conditions
AND ANSWERS SURE A+
✔✔When must the three installation inspections be performed? - ✔✔-1- At the
completion of the device back box but prior to #2
- 2- At the completion of the device cable installation but prior to #3
- 3- At the completion of the device installation but prior to activation
✔✔What is the purpose of fire alarm plans and record drawings tag? - ✔✔To certify that
the plan or finished drawing of a fire system meets all codes and standards
✔✔What five things should it say on the installation label? - ✔✔-DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firms name address telephone and registration number
-Installation date and licensee signature and license number
-The name of whoever planned the system
, ✔✔What five things should it say on the RESIDENTIAL installation label? - ✔✔-DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firm's name address telephone and registration number
-Installation date and licensee signature and license number
-An inscription certifying the install meets code
✔✔When and where must the installation labels be placed? - ✔✔Inside the control
panel cover or in a permanent location
✔✔When must a service label be used? - ✔✔After any service that has corrected and
issue that was noted on a yellow or red label
✔✔What does the licensee signature on a service label mean? - ✔✔The signature of
the license on the service label certifies that the service performed complies with
requirements.
✔✔How long must a service label stay in place? - ✔✔Two years. An agent of the Fire
Marshall may remove it at any time.
✔✔If a system is resulting in a fault condition a _____ label should be placed with black
lettering on the outside of the control panel or in a permanent location. - ✔✔Red
✔✔If after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a ________ label should be placed with black
lettering on the outside of the control panel or in a permanent location. - ✔✔Yellow
Label
✔✔What six things must be listed on a Service Label? - ✔✔-DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE MARSHALL SERVICE RECORD
-The firm's name address telephone and registration number
-Service date and licensee signature and license number
-A list of services performed
-Type of service - either general service or a correction of conditions
