NCCER KAHOOT Module 8 Exam | Verified Exam Questions and Answers | Latest Updated Study Material 2026

NCCER KAHOOT Module 8 Exam | Verified Exam Questions and
Answers | Latest Updated Study Material 2026

Question:

The purpose of a sealing fitting is to ?
A. Carry wires through conduit and other type of raceways
B. Connect conduit to boxes
C. Bundle wires and cables together
D. Minimize the passage of gases, vapors and flames through a conduit
Answer:

Minimize the passage of gases, vapors and flames through a conduit

Question:

What is the deduct associated when making a 28 inch stub-up on a piece of 3/4in EMT ?
A. 5in
B. 22in
C. 6in
D. 23in
Answer:

6 inches

Question:

When making a 6in offset on a piece of 3/4in EMT, using 30 degree bends, what is the multiplier
associated with?
A. 1.4in
B. 12in
C. 6in
D. 2in
Answer:

2 inches

, Question:

NEC article 344 covers the installation requirements for ?
A. PVC
B. IMC
C. EMT
D. RMC
Answer:

RMC

Question:

One characteristic of aluminum conduit is that it .
A. Is more resistant to wet environments
B. Requires more maintenance
C. Does not require supplementary corrosion protection when used in concrete
D. Is too thin to be threaded
Answer:

Is more resistant to wet
environments

Question:

What is the multiplier when making a 45 degree offset ?
A. 2 in
B. 6 in
C. 5 in
D. 1.4 in
Answer:

1.4

Question:

EMT must be supported every .
A. 4 ft
B. 10 ft