NCCER Module 1 - safety Exam | Verified Exam Questions and Answers |
Latest Updated Study Material 2026
Question:
companies with strong safety cultures usually have lower?
Answer:
incident and accident rates
Question:
what is a statement regarding safety?
Answer:
it's a learned behavior and
attitude
Question:
poor lighting, excessive noise, and inadequate guards for moving parts are examples of?
Answer:
unsafe conditions
Question:
the activity that consists of breaking a job into its component tasks and then analyzing each step
for potential hazards is called a?
Answer:
job safety analysis JSA
Question:
a measure of the probability, consequences, and exposure related to an event is referred to as?
Answer:
Risk
Question:
if there is a hole in the floor or a structure, the preferred method of protecting workers from falls
is to?
Answer:
be guarded with marked flags or covered. (must be clearly
, marked)
Question:
the D-ring or support point on a safety harness should be placed?
Answer:
between the shoulder blades
Question:
a personal fall arrest system should be inspected monthly by a?
Answer:
competent person
Question:
lanyards that have no shock-absorbing features are used for?
Answer:
positioning and fall restraint.
Question:
when placing a ladder against a platform or roof the top of the ladder should be extended above
the point where the ladder touches the platform or roof by atleast?
Answer:
3 feet (0.9 m)
Question:
when performing overhead work on scaffolding what protective measures must be taken to
prevent objects from falling and striking a person below?
Answer:
use of
toeboards, debris nets, catch platforms, or canopies
Question:
when stacking materials such as blocks or bricks, do not stack materials beyond a?
Answer:
4:1 (4 to 1) ratio
Latest Updated Study Material 2026
Question:
companies with strong safety cultures usually have lower?
Answer:
incident and accident rates
Question:
what is a statement regarding safety?
Answer:
it's a learned behavior and
attitude
Question:
poor lighting, excessive noise, and inadequate guards for moving parts are examples of?
Answer:
unsafe conditions
Question:
the activity that consists of breaking a job into its component tasks and then analyzing each step
for potential hazards is called a?
Answer:
job safety analysis JSA
Question:
a measure of the probability, consequences, and exposure related to an event is referred to as?
Answer:
Risk
Question:
if there is a hole in the floor or a structure, the preferred method of protecting workers from falls
is to?
Answer:
be guarded with marked flags or covered. (must be clearly
, marked)
Question:
the D-ring or support point on a safety harness should be placed?
Answer:
between the shoulder blades
Question:
a personal fall arrest system should be inspected monthly by a?
Answer:
competent person
Question:
lanyards that have no shock-absorbing features are used for?
Answer:
positioning and fall restraint.
Question:
when placing a ladder against a platform or roof the top of the ladder should be extended above
the point where the ladder touches the platform or roof by atleast?
Answer:
3 feet (0.9 m)
Question:
when performing overhead work on scaffolding what protective measures must be taken to
prevent objects from falling and striking a person below?
Answer:
use of
toeboards, debris nets, catch platforms, or canopies
Question:
when stacking materials such as blocks or bricks, do not stack materials beyond a?
Answer:
4:1 (4 to 1) ratio
