ICC CALIFORNIA DSA SHOTCRETE SPECIAL INSPECTOR
EXAM PRACTICE EXAM QUESTIONS AND CORRECT
ANSWER WITH EXPLANATION LATEST 2026 UPDATE
100% CORRECT STUDY GUIDE
1.
The primary purpose of shotcrete special inspection is to:
A. Verify compliance with approved plans and code requirements
B. Design structural systems
C. Approve paint finishes
D. Install roofing systems
Answer: A
Shotcrete special inspectors verify that construction complies with approved documents and
code requirements.
2.
DSA stands for:
A. Division of the State Architect
B. Department of Structural Analysis
C. Design Standards Association
D. Division of Safety Administration
Answer: A
The California Division of the State Architect oversees certain public construction projects.
3.
The California Building Code chapter governing special inspections is:
A. Chapter 17
B. Chapter 5
C. Chapter 9
D. Chapter 27
,Answer: A
CBC Chapter 17 establishes special inspection requirements.
4.
Shotcrete is:
A. Pneumatically placed mortar or concrete
B. Hand-troweled plaster only
C. Lightweight gypsum coating
D. Reinforced masonry grout
Answer: A
Shotcrete is pneumatically projected concrete or mort
5.
The dry-mix shotcrete process is sometimes referred to as:
A. Gunite
B. Groutcrete
C. Ferrocrete
D. Fibercrete
Answer: A
Gunite commonly refers to the dry-mix shotcrete process.
6.
Shotcrete inspection during placement is generally required to be:
A. Continuous
B. Periodic only
C. Optional
D. Monthly
Answer: A
California code requires continuous inspection during shotcrete placement.
7.
, The inspector should verify:
A. Materials, equipment, and placement procedures
B. Furniture arrangements
C. Paint colors
D. Landscaping layouts
Answer: A
Special inspectors review all critical shotcrete installation factors. (ICC Digital Codes)
8.
Shotcrete commonly contains:
A. Cement, aggregates, and water
B. Structural steel only
C. Roofing insulation only
D. Gypsum board only
Answer: A
Shotcrete uses cementitious concrete materials.
9.
The wet-mix shotcrete process delivers:
A. Premixed concrete through the hose
B. Dry cement only
C. Water separately from the nozzle only
D. Reinforcement through the nozzle
Answer: A
Wet-mix shotcrete pumps premixed material through delivery hoses.
10.
The dry-mix process introduces water:
A. At the nozzle
B. At the batching plant only
C. Inside reinforcement cages
D. During curing only
Answer: A
Dry materials are mixed with water at the nozzle.
EXAM PRACTICE EXAM QUESTIONS AND CORRECT
ANSWER WITH EXPLANATION LATEST 2026 UPDATE
100% CORRECT STUDY GUIDE
1.
The primary purpose of shotcrete special inspection is to:
A. Verify compliance with approved plans and code requirements
B. Design structural systems
C. Approve paint finishes
D. Install roofing systems
Answer: A
Shotcrete special inspectors verify that construction complies with approved documents and
code requirements.
2.
DSA stands for:
A. Division of the State Architect
B. Department of Structural Analysis
C. Design Standards Association
D. Division of Safety Administration
Answer: A
The California Division of the State Architect oversees certain public construction projects.
3.
The California Building Code chapter governing special inspections is:
A. Chapter 17
B. Chapter 5
C. Chapter 9
D. Chapter 27
,Answer: A
CBC Chapter 17 establishes special inspection requirements.
4.
Shotcrete is:
A. Pneumatically placed mortar or concrete
B. Hand-troweled plaster only
C. Lightweight gypsum coating
D. Reinforced masonry grout
Answer: A
Shotcrete is pneumatically projected concrete or mort
5.
The dry-mix shotcrete process is sometimes referred to as:
A. Gunite
B. Groutcrete
C. Ferrocrete
D. Fibercrete
Answer: A
Gunite commonly refers to the dry-mix shotcrete process.
6.
Shotcrete inspection during placement is generally required to be:
A. Continuous
B. Periodic only
C. Optional
D. Monthly
Answer: A
California code requires continuous inspection during shotcrete placement.
7.
, The inspector should verify:
A. Materials, equipment, and placement procedures
B. Furniture arrangements
C. Paint colors
D. Landscaping layouts
Answer: A
Special inspectors review all critical shotcrete installation factors. (ICC Digital Codes)
8.
Shotcrete commonly contains:
A. Cement, aggregates, and water
B. Structural steel only
C. Roofing insulation only
D. Gypsum board only
Answer: A
Shotcrete uses cementitious concrete materials.
9.
The wet-mix shotcrete process delivers:
A. Premixed concrete through the hose
B. Dry cement only
C. Water separately from the nozzle only
D. Reinforcement through the nozzle
Answer: A
Wet-mix shotcrete pumps premixed material through delivery hoses.
10.
The dry-mix process introduces water:
A. At the nozzle
B. At the batching plant only
C. Inside reinforcement cages
D. During curing only
Answer: A
Dry materials are mixed with water at the nozzle.
