Mk1 swe Exam Study Guide –
Practice Questions with Verified
Answers. GRADED A+. Latest
2026/2027 Update
what are two types of maintenance - Answer✔✔ -Corrective and preventative
What article always captain to conduct NJP - Answer✔✔ -Article 15
Where two types of procedures that may be accessed from maintenance
procedure option - Answer✔✔ -Official and local
Who is authorized to conduct tag outs - Answer✔✔ -Authorizing officer
Out of calibration tags should be used when - Answer✔✔ -When indicating
parameter errors are small and consistent
,For modernized units the boat inspection reports are to be entered through -
Answer✔✔ -Almis/ EALpage
Cutter engineering report shall be completed in accordance with - Answer✔✔ -
Naval engineering manual chapter 90
On an MPC the warning shall come where in the text - Answer✔✔ -Before the
instruction
On an MPC what would constitute an expendable - Answer✔✔ -Rags
PMS that does not need to be included in the cutter engineering report is -
Answer✔✔ -Daily and weekly
With regards to casreps what is mandatory on all updates corrects and
cancellations - Answer✔✔ -REF
Which unit besides a shore unit are exempt from filling out the POSIT line -
Answer✔✔ -Cutter underway
A casrep it should be made as soon as possible no later than ____hours -
Answer✔✔ -24
, Casualties that effect a secondary mission should always have a casualty
category of - Answer✔✔ -2
AMPN is mandatory after any set that contains an entry of? - Answer✔✔ -Other,
tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line -
Answer✔✔ -Unknown
What is the criteria for submitting CASCOR - Answer✔✔ -The delay expressed an
hours, and correcting the casualty due to parts unavailability, a list of all parts
requested and dates received; the total number of man-hours expanded; the
number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already
been
CASREP'd you should send an? - Answer✔✔ -Update
Where do you find the hierarchy of guidance for specification plans - Answer✔✔
-NEM chapter 41
Practice Questions with Verified
Answers. GRADED A+. Latest
2026/2027 Update
what are two types of maintenance - Answer✔✔ -Corrective and preventative
What article always captain to conduct NJP - Answer✔✔ -Article 15
Where two types of procedures that may be accessed from maintenance
procedure option - Answer✔✔ -Official and local
Who is authorized to conduct tag outs - Answer✔✔ -Authorizing officer
Out of calibration tags should be used when - Answer✔✔ -When indicating
parameter errors are small and consistent
,For modernized units the boat inspection reports are to be entered through -
Answer✔✔ -Almis/ EALpage
Cutter engineering report shall be completed in accordance with - Answer✔✔ -
Naval engineering manual chapter 90
On an MPC the warning shall come where in the text - Answer✔✔ -Before the
instruction
On an MPC what would constitute an expendable - Answer✔✔ -Rags
PMS that does not need to be included in the cutter engineering report is -
Answer✔✔ -Daily and weekly
With regards to casreps what is mandatory on all updates corrects and
cancellations - Answer✔✔ -REF
Which unit besides a shore unit are exempt from filling out the POSIT line -
Answer✔✔ -Cutter underway
A casrep it should be made as soon as possible no later than ____hours -
Answer✔✔ -24
, Casualties that effect a secondary mission should always have a casualty
category of - Answer✔✔ -2
AMPN is mandatory after any set that contains an entry of? - Answer✔✔ -Other,
tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line -
Answer✔✔ -Unknown
What is the criteria for submitting CASCOR - Answer✔✔ -The delay expressed an
hours, and correcting the casualty due to parts unavailability, a list of all parts
requested and dates received; the total number of man-hours expanded; the
number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already
been
CASREP'd you should send an? - Answer✔✔ -Update
Where do you find the hierarchy of guidance for specification plans - Answer✔✔
-NEM chapter 41
