FLORIDA SWIMMING POOL CONTRACTOR
EXAM COMPREHENSIVE PRACTICE TEST
Verified Questions With Detailed Rationales |
2025-2026 Edition Florida Construction
Industry Licensing Board (CILB) | DBPR |
Chapter 489
CORE DOMAINS COVERED:
• Pool Construction & Materials - Gunite/shotcrete, fiberglass, vinyl
liner pools; structural design, concrete requirements, rebar placement,
deck construction
• Plumbing & Hydraulics - Pipe sizing (Schedule 40/80 PVC, CPVC),
pump selection and sizing, filtration systems, main drains, anti-
entrapment devices (ANSI/APSP-7), flow rates, turnover rates
• Water Chemistry & Treatment - pH balance, total alkalinity, calcium
hardness, chlorine (free/combined), Langelier Saturation Index (LSI),
superchlorination/shock treatment, salt-chlorine generators
• Electrical Systems & Bonding - Equipotential bonding, grounding,
GFCI requirements, underwater lighting (NEC Article 680), electrical
safety
• Safety & Barrier Requirements - Florida Statutes Chapter 515
(Residential Swimming Pool Safety Act), barrier height (4 feet
minimum), self-closing/self-latching gates, anti-entrapment (Virginia
Graeme Baker Act)
• Florida Building Code (FBC) - Chapter 41 (Swimming Pools, Spas, and
Hot Tubs), Chapter 45 compliance, energy efficiency requirements
• Licensing & Business Practices - Florida Statute 489 (Contractor
licensing), permit requirements, contracts, lien law, insurance, OSHA
regulations
, • Site Preparation & Excavation - Soil stability, surveys, setbacks,
hydrostatic relief valves, dewatering
SECTION A: LICENSING & REGULATORY FRAMEWORK
1. A swimming pool contractor is licensed to construct:
A. Only in-ground pools
B. In-ground swimming pools, spas, and related structures
C. Only above-ground pools
D. Only commercial pools
Answer: B. In-ground swimming pools, spas, and related structures
Rationale: Florida Statute 489.105 defines a swimming pool contractor as
a contractor whose services are limited to the construction, remodeling, or
repair of swimming pools, spas, and hot tubs, including associated equipment
and structures.
2. Which Florida Statute chapter governs the licensing and scope of work
for Class A, B, and C contractors, including pool and spa contractors?
A. Chapter 472
B. Chapter 489
C. Chapter 553
D. Chapter 617
Answer: B. Chapter 489
Rationale: Chapter 489 of the Florida Statutes outlines the licensing
requirements and permissible work for Class A, B, and C contractors,
including pool and spa contractors.
3. A residential pool contractor must obtain which type of permit for a
single-family home pool construction?
,A. Commercial building permit
B. Residential permit (RP)
C. Civil engineering permit (CPC)
D. Environmental impact permit
Answer: B. Residential permit (RP)
Rationale: Residential permits (RP) are issued for single-family home
pool projects, whereas CPC permits apply to larger commercial or multi-
family developments.
4. In Florida, which agency typically has jurisdiction over a pool located
within a homeowners' association?
A. State Department of Health
B. Local county building department
C. Federal EPA
D. OSHA regional office
Answer: B. Local county building department
Rationale: Local county building departments enforce building codes and
permit requirements for pools within HOA communities, unless a state-wide
regulation specifically applies.
5. Which Florida Building Code chapter specifically governs the design
and construction of residential swimming pools?
A. Chapter 4 – Building Planning
B. Chapter 41 – Swimming Pools, Spas, and Hot Tubs
C. Chapter 7 – Existing Buildings
D. Chapter 13 – Existing Structures
Answer: B. Chapter 41 – Swimming Pools, Spas, and Hot Tubs
Rationale: Chapter 41 of the Florida Building Code contains the
requirements for design, construction, alteration, and repair of residential
pools, spas, and hot tubs.
, 6. What is the minimum thickness of concrete required for a residential
swimming pool shell?
A. 2 inches
B. 3 inches
C. 4 inches
D. 6 inches
Answer: C. 4 inches
Rationale: Florida building codes require a minimum of 4 inches of
concrete for a residential pool shell to ensure structural integrity.
7. Gunite (shotcrete) pools are constructed by:
A. Placing prefabricated panels
B. Pneumatically applying a cementitious material over a rebar-reinforced
shell
C. Installing a vinyl liner over a steel frame
D. Using fiberglass pre-formed shells
Answer: B. Pneumatically applying a cementitious material over a rebar-
reinforced shell
Rationale: Gunite or shotcrete pools are constructed by applying a
mixture of cement, sand, and water pneumatically over a steel rebar
framework, creating a monolithic concrete shell.
8. Fiberglass swimming pools are:
A. Cast on-site
B. Pre-manufactured shells installed into excavated holes
C. Built with vinyl liners
D. Made of concrete
Answer: B. Pre-manufactured shells installed into excavated holes
EXAM COMPREHENSIVE PRACTICE TEST
Verified Questions With Detailed Rationales |
2025-2026 Edition Florida Construction
Industry Licensing Board (CILB) | DBPR |
Chapter 489
CORE DOMAINS COVERED:
• Pool Construction & Materials - Gunite/shotcrete, fiberglass, vinyl
liner pools; structural design, concrete requirements, rebar placement,
deck construction
• Plumbing & Hydraulics - Pipe sizing (Schedule 40/80 PVC, CPVC),
pump selection and sizing, filtration systems, main drains, anti-
entrapment devices (ANSI/APSP-7), flow rates, turnover rates
• Water Chemistry & Treatment - pH balance, total alkalinity, calcium
hardness, chlorine (free/combined), Langelier Saturation Index (LSI),
superchlorination/shock treatment, salt-chlorine generators
• Electrical Systems & Bonding - Equipotential bonding, grounding,
GFCI requirements, underwater lighting (NEC Article 680), electrical
safety
• Safety & Barrier Requirements - Florida Statutes Chapter 515
(Residential Swimming Pool Safety Act), barrier height (4 feet
minimum), self-closing/self-latching gates, anti-entrapment (Virginia
Graeme Baker Act)
• Florida Building Code (FBC) - Chapter 41 (Swimming Pools, Spas, and
Hot Tubs), Chapter 45 compliance, energy efficiency requirements
• Licensing & Business Practices - Florida Statute 489 (Contractor
licensing), permit requirements, contracts, lien law, insurance, OSHA
regulations
, • Site Preparation & Excavation - Soil stability, surveys, setbacks,
hydrostatic relief valves, dewatering
SECTION A: LICENSING & REGULATORY FRAMEWORK
1. A swimming pool contractor is licensed to construct:
A. Only in-ground pools
B. In-ground swimming pools, spas, and related structures
C. Only above-ground pools
D. Only commercial pools
Answer: B. In-ground swimming pools, spas, and related structures
Rationale: Florida Statute 489.105 defines a swimming pool contractor as
a contractor whose services are limited to the construction, remodeling, or
repair of swimming pools, spas, and hot tubs, including associated equipment
and structures.
2. Which Florida Statute chapter governs the licensing and scope of work
for Class A, B, and C contractors, including pool and spa contractors?
A. Chapter 472
B. Chapter 489
C. Chapter 553
D. Chapter 617
Answer: B. Chapter 489
Rationale: Chapter 489 of the Florida Statutes outlines the licensing
requirements and permissible work for Class A, B, and C contractors,
including pool and spa contractors.
3. A residential pool contractor must obtain which type of permit for a
single-family home pool construction?
,A. Commercial building permit
B. Residential permit (RP)
C. Civil engineering permit (CPC)
D. Environmental impact permit
Answer: B. Residential permit (RP)
Rationale: Residential permits (RP) are issued for single-family home
pool projects, whereas CPC permits apply to larger commercial or multi-
family developments.
4. In Florida, which agency typically has jurisdiction over a pool located
within a homeowners' association?
A. State Department of Health
B. Local county building department
C. Federal EPA
D. OSHA regional office
Answer: B. Local county building department
Rationale: Local county building departments enforce building codes and
permit requirements for pools within HOA communities, unless a state-wide
regulation specifically applies.
5. Which Florida Building Code chapter specifically governs the design
and construction of residential swimming pools?
A. Chapter 4 – Building Planning
B. Chapter 41 – Swimming Pools, Spas, and Hot Tubs
C. Chapter 7 – Existing Buildings
D. Chapter 13 – Existing Structures
Answer: B. Chapter 41 – Swimming Pools, Spas, and Hot Tubs
Rationale: Chapter 41 of the Florida Building Code contains the
requirements for design, construction, alteration, and repair of residential
pools, spas, and hot tubs.
, 6. What is the minimum thickness of concrete required for a residential
swimming pool shell?
A. 2 inches
B. 3 inches
C. 4 inches
D. 6 inches
Answer: C. 4 inches
Rationale: Florida building codes require a minimum of 4 inches of
concrete for a residential pool shell to ensure structural integrity.
7. Gunite (shotcrete) pools are constructed by:
A. Placing prefabricated panels
B. Pneumatically applying a cementitious material over a rebar-reinforced
shell
C. Installing a vinyl liner over a steel frame
D. Using fiberglass pre-formed shells
Answer: B. Pneumatically applying a cementitious material over a rebar-
reinforced shell
Rationale: Gunite or shotcrete pools are constructed by applying a
mixture of cement, sand, and water pneumatically over a steel rebar
framework, creating a monolithic concrete shell.
8. Fiberglass swimming pools are:
A. Cast on-site
B. Pre-manufactured shells installed into excavated holes
C. Built with vinyl liners
D. Made of concrete
Answer: B. Pre-manufactured shells installed into excavated holes
