Section 1 - Scope
1-Which of the following activities is NOT included in the scope of API 570?
ANSWER
Operating a pipe system
3-API 570 pertains to:
ANSWER
Only to metallic and FRP pipe
2-Which of the following activities is NOT included in the scope of API 570?
ANSWER
Performing pipe fabrication
4-API 570 pertains only to:
ANSWER
Pipe and their associated relief devices
5-The inspector discovers a problem on a pipe that requires corrective action. Who is re-
sponsible to respond to this issue?
ANSWER
Owner/User
6-API 570 is used:
1
,ANSWER
By petro-chemical facilities
7-API 570 takes effect:
ANSWER
Once the pipe is places in service
10-During a piping alteration, if there is a conflict between the requirements of API 570 and
the construction code, which should be followed?
ANSWER
API 570
9-During a piping repair, if there is a conflict between the requirements of API 570 and the
construction code, which should be followed?
ANSWER
API 570
8-Companies that use API 570 must:
ANSWER
Either employ or have access to an authorized inspection agency
12-An in-service piping system is inspected. If there is a conflict between the requirements
of API 570 and the legal jurisdiction, which should be followed?
ANSWER
The most stringent requirements
11-An in-service pipe in being repaired or altered. If there is a conflict between the require-
ments of API 570 and the legal jurisdiction, which should be followed?
2
,ANSWER
The most stringent requirements
13-The requirements of API 570 are considered optional for which of the following piping
systems?
ANSWER
300 psig steam system
14-The requirements of API 570 are considered optional for which of the following piping
systems?
ANSWER
Category D piping
15-Which of the following chemical plant piping is NOT included in the scope of API 570?
ANSWER
4 NPS low-density polyethylene pipe
16-Which code is used for Fitness for Service evaluations?
ANSWER
API 579
17-Which code is used for RBI evaluations?
ANSWER
API 580
Section 2
1-During an in-service internal inspection, a crack is discovered on a longitudinal weld. This
crack can be evaluated to which code?
3
, ANSWER
API 579
2-Which code provides requirements for hot tapping?
ANSWER
API 2201
3-Which publication provides information on corrosion mechanisms?
ANSWER
API 571
5-Which recommended practice is used for guidance in inspecting and testing valves?
ANSWER
API 578
4-Which publication is used for RBI assessments?
ANSWER
API 580
**6-Which document can be used when determining soil resistivity?
ANSWER
ASTM G57
**7-Which document can provide more information on Injectionmand Mixing points?
ANSWER
NACE RP 34101
4
1-Which of the following activities is NOT included in the scope of API 570?
ANSWER
Operating a pipe system
3-API 570 pertains to:
ANSWER
Only to metallic and FRP pipe
2-Which of the following activities is NOT included in the scope of API 570?
ANSWER
Performing pipe fabrication
4-API 570 pertains only to:
ANSWER
Pipe and their associated relief devices
5-The inspector discovers a problem on a pipe that requires corrective action. Who is re-
sponsible to respond to this issue?
ANSWER
Owner/User
6-API 570 is used:
1
,ANSWER
By petro-chemical facilities
7-API 570 takes effect:
ANSWER
Once the pipe is places in service
10-During a piping alteration, if there is a conflict between the requirements of API 570 and
the construction code, which should be followed?
ANSWER
API 570
9-During a piping repair, if there is a conflict between the requirements of API 570 and the
construction code, which should be followed?
ANSWER
API 570
8-Companies that use API 570 must:
ANSWER
Either employ or have access to an authorized inspection agency
12-An in-service piping system is inspected. If there is a conflict between the requirements
of API 570 and the legal jurisdiction, which should be followed?
ANSWER
The most stringent requirements
11-An in-service pipe in being repaired or altered. If there is a conflict between the require-
ments of API 570 and the legal jurisdiction, which should be followed?
2
,ANSWER
The most stringent requirements
13-The requirements of API 570 are considered optional for which of the following piping
systems?
ANSWER
300 psig steam system
14-The requirements of API 570 are considered optional for which of the following piping
systems?
ANSWER
Category D piping
15-Which of the following chemical plant piping is NOT included in the scope of API 570?
ANSWER
4 NPS low-density polyethylene pipe
16-Which code is used for Fitness for Service evaluations?
ANSWER
API 579
17-Which code is used for RBI evaluations?
ANSWER
API 580
Section 2
1-During an in-service internal inspection, a crack is discovered on a longitudinal weld. This
crack can be evaluated to which code?
3
, ANSWER
API 579
2-Which code provides requirements for hot tapping?
ANSWER
API 2201
3-Which publication provides information on corrosion mechanisms?
ANSWER
API 571
5-Which recommended practice is used for guidance in inspecting and testing valves?
ANSWER
API 578
4-Which publication is used for RBI assessments?
ANSWER
API 580
**6-Which document can be used when determining soil resistivity?
ANSWER
ASTM G57
**7-Which document can provide more information on Injectionmand Mixing points?
ANSWER
NACE RP 34101
4
