ICC CALIFORNIA CONSTRUCTION SAFETY INSPECTOR
EXAM QUESTIONS AND CORRECT ANSWER WITH
EXPLANATION GRADED A+ STUDY GUIDE LATEST 2026
UPDATE 100% CORRECT
1.
The primary responsibility of a Construction Safety Inspector is to:
A. Design structures
B. Identify and correct unsafe construction conditions
C. Approve architectural plans
D. Manage contractor budgets
Answer: B
The role focuses on identifying and correcting safety hazards.
2.
Construction safety enforcement is primarily based on:
A. OSHA regulations and adopted building codes
B. Contractor preferences
C. Designer recommendations
D. Material suppliers
Answer: A
Safety enforcement follows OSHA and codes.
3.
California Building Standards are found in:
A. Title 24
B. Title 10
C. Title 8
D. Title 18
Answer: A
Title 24 contains California building codes.
,4.
A Construction Safety Inspector’s main goal is:
A. Life safety protection
B. Cost reduction
C. Design approval
D. Material selection
Answer: A
Life safety is the priority.
5.
A stop-work order is issued when:
A. Immediate safety hazards exist
B. Work is ahead of schedule
C. Materials are delivered early
D. Contractor requests delay
Answer: A
Hazards require immediate stop.
6.
OSHA primarily regulates:
A. Workplace safety
B. Architectural design
C. Building aesthetics
D. Material pricing
Answer: A
OSHA governs workplace safety.
7.
Personal Protective Equipment (PPE) includes:
A. Hard hats, gloves, safety boots
B. Paint and tools
C. Blueprints
, D. Concrete mixes
Answer: A
PPE protects workers.
8.
A hazard is:
A. Any unsafe condition with potential for injury
B. Completed construction
C. Approved design
D. Material shipment
Answer: A
Hazards create risk.
9.
Scaffolding must be:
A. Properly constructed and secured
B. Painted
C. Decorative
D. Optional
Answer: A
Scaffolds must be safe.
10.
Fall protection is required when working above:
A. 6 feet (OSHA general rule)
B. 1 foot
C. 20 feet only
D. Ground level
Answer: A
Fall protection threshold applies.
11.
EXAM QUESTIONS AND CORRECT ANSWER WITH
EXPLANATION GRADED A+ STUDY GUIDE LATEST 2026
UPDATE 100% CORRECT
1.
The primary responsibility of a Construction Safety Inspector is to:
A. Design structures
B. Identify and correct unsafe construction conditions
C. Approve architectural plans
D. Manage contractor budgets
Answer: B
The role focuses on identifying and correcting safety hazards.
2.
Construction safety enforcement is primarily based on:
A. OSHA regulations and adopted building codes
B. Contractor preferences
C. Designer recommendations
D. Material suppliers
Answer: A
Safety enforcement follows OSHA and codes.
3.
California Building Standards are found in:
A. Title 24
B. Title 10
C. Title 8
D. Title 18
Answer: A
Title 24 contains California building codes.
,4.
A Construction Safety Inspector’s main goal is:
A. Life safety protection
B. Cost reduction
C. Design approval
D. Material selection
Answer: A
Life safety is the priority.
5.
A stop-work order is issued when:
A. Immediate safety hazards exist
B. Work is ahead of schedule
C. Materials are delivered early
D. Contractor requests delay
Answer: A
Hazards require immediate stop.
6.
OSHA primarily regulates:
A. Workplace safety
B. Architectural design
C. Building aesthetics
D. Material pricing
Answer: A
OSHA governs workplace safety.
7.
Personal Protective Equipment (PPE) includes:
A. Hard hats, gloves, safety boots
B. Paint and tools
C. Blueprints
, D. Concrete mixes
Answer: A
PPE protects workers.
8.
A hazard is:
A. Any unsafe condition with potential for injury
B. Completed construction
C. Approved design
D. Material shipment
Answer: A
Hazards create risk.
9.
Scaffolding must be:
A. Properly constructed and secured
B. Painted
C. Decorative
D. Optional
Answer: A
Scaffolds must be safe.
10.
Fall protection is required when working above:
A. 6 feet (OSHA general rule)
B. 1 foot
C. 20 feet only
D. Ground level
Answer: A
Fall protection threshold applies.
11.
