ICC CALIFORNIA COMMERCIAL COMBINATION
INSPECTOR EXAM QUESTIONS AND CORRECT ANSWER
WITH EXPLANATION GRADED A+ STUDY GUIDE LATEST
2026 UPDATE 100% CORRECT
1. The primary purpose of a combination inspector is to:
A. Inspect multiple building systems for code compliance
B. Design buildings
C. Approve architectural aesthetics
D. Install systems
Answer: A
Rationale: Combination inspectors cover multiple disciplines.
2. California building codes are primarily based on:
A. International Codes with state amendments
B. Local contractor rules
C. Private engineering standards only
D. Insurance company policies
Answer: A
Rationale: California adopts and modifies I-Codes.
3. A commercial building inspection includes evaluation of:
A. Structural, electrical, plumbing, mechanical systems
B. Furniture layout
C. Interior decoration
D. Landscaping only
Answer: A
Rationale: Full systems review required.
4. The California Building Code (CBC) is part of:
A. Title 24, Part 2
B. Title 8
C. OSHA regulations only
D. Federal plumbing code
Answer: A
Rationale: CBC is Title 24 Part 2.
,5. A building permit ensures:
A. Code compliance before construction
B. Aesthetic approval
C. Insurance coverage
D. Faster construction
Answer: A
Rationale: Legal authorization for work.
6. An inspector’s role is to:
A. Verify compliance with approved plans and codes
B. Design structures
C. Manage construction budgets
D. Approve financing
Answer: A
Rationale: Enforcement role only.
7. A code violation requires:
A. Correction or approval through legal process
B. Ignoring
C. Painting over
D. Structural removal always
Answer: A
Rationale: Must be resolved.
8. Structural safety is based on:
A. Load-bearing capacity and stability
B. Paint quality
C. Lighting design
D. Furniture placement
Answer: A
Rationale: Engineering safety.
9. Load-bearing walls support:
A. Structural loads
B. Paint
C. Wiring only
D. Plumbing fixtures
Answer: A
Rationale: Structural support.
, 10. Non-load-bearing walls:
A. Do not support structural loads
B. Hold roof weight
C. Carry beams
D. Support foundations
Answer: A
Rationale: Partition walls only.
11. Fire-resistive construction is designed to:
A. Slow fire spread
B. Increase heat transfer
C. Reduce ventilation
D. Improve aesthetics
Answer: A
Rationale: Life safety design.
12. Means of egress must be:
A. Continuous and unobstructed
B. Locked permanently
C. Decorative
D. Hidden
Answer: A
Rationale: Emergency escape path.
13. Exit signage must be:
A. Visible and illuminated
B. Decorative only
C. Optional
D. Painted only
Answer: A
Rationale: Life safety requirement.
14. Occupancy classification determines:
A. Code requirements for a building
B. Paint color
C. Furniture type
D. Landscaping
Answer: A
Rationale: Defines safety standards.
INSPECTOR EXAM QUESTIONS AND CORRECT ANSWER
WITH EXPLANATION GRADED A+ STUDY GUIDE LATEST
2026 UPDATE 100% CORRECT
1. The primary purpose of a combination inspector is to:
A. Inspect multiple building systems for code compliance
B. Design buildings
C. Approve architectural aesthetics
D. Install systems
Answer: A
Rationale: Combination inspectors cover multiple disciplines.
2. California building codes are primarily based on:
A. International Codes with state amendments
B. Local contractor rules
C. Private engineering standards only
D. Insurance company policies
Answer: A
Rationale: California adopts and modifies I-Codes.
3. A commercial building inspection includes evaluation of:
A. Structural, electrical, plumbing, mechanical systems
B. Furniture layout
C. Interior decoration
D. Landscaping only
Answer: A
Rationale: Full systems review required.
4. The California Building Code (CBC) is part of:
A. Title 24, Part 2
B. Title 8
C. OSHA regulations only
D. Federal plumbing code
Answer: A
Rationale: CBC is Title 24 Part 2.
,5. A building permit ensures:
A. Code compliance before construction
B. Aesthetic approval
C. Insurance coverage
D. Faster construction
Answer: A
Rationale: Legal authorization for work.
6. An inspector’s role is to:
A. Verify compliance with approved plans and codes
B. Design structures
C. Manage construction budgets
D. Approve financing
Answer: A
Rationale: Enforcement role only.
7. A code violation requires:
A. Correction or approval through legal process
B. Ignoring
C. Painting over
D. Structural removal always
Answer: A
Rationale: Must be resolved.
8. Structural safety is based on:
A. Load-bearing capacity and stability
B. Paint quality
C. Lighting design
D. Furniture placement
Answer: A
Rationale: Engineering safety.
9. Load-bearing walls support:
A. Structural loads
B. Paint
C. Wiring only
D. Plumbing fixtures
Answer: A
Rationale: Structural support.
, 10. Non-load-bearing walls:
A. Do not support structural loads
B. Hold roof weight
C. Carry beams
D. Support foundations
Answer: A
Rationale: Partition walls only.
11. Fire-resistive construction is designed to:
A. Slow fire spread
B. Increase heat transfer
C. Reduce ventilation
D. Improve aesthetics
Answer: A
Rationale: Life safety design.
12. Means of egress must be:
A. Continuous and unobstructed
B. Locked permanently
C. Decorative
D. Hidden
Answer: A
Rationale: Emergency escape path.
13. Exit signage must be:
A. Visible and illuminated
B. Decorative only
C. Optional
D. Painted only
Answer: A
Rationale: Life safety requirement.
14. Occupancy classification determines:
A. Code requirements for a building
B. Paint color
C. Furniture type
D. Landscaping
Answer: A
Rationale: Defines safety standards.
