2026 Exam Questions and
Answers | Already Graded A+
When estimating how much fabric will be required for custom designed
draperies, which of the following will you need to consider when
determining the total fabric width needed?
A the amount of fullness of the drapery, the opening size
B the opening size, the amount of fullness, the return
C the return, the opening size, the stacking space
D all of these - ANSWER ✔✔D. all of these // In estimating fabric for
draperies, the total fabric width must be determined. This is the total of
the opening size, the stacking space, the return, any overlap of two
sections of drapery, and the amount of fullness of the drapery.
,What is the maximum height of an accessible (barrier free) sink?
36" (900 mm)
34" (865 mm)
30" (750 mm)
27" (685 mm) - ANSWER ✔✔B. 34" // NCIDQ 5.2 ALL accessible
(barrier-free) countertops, sinks, reception/transaction surfaces, and
other horizontal work surfaces MUST NOT exceed 34″ (865 mm) AFF
with a 27″H (685 mm) clear knee space below.
ADA.gov 606.3 Height. Lavatories and sinks shall be installed with the
front of the higher of the rim or counter surface 34 inches (865 mm)
maximum above the finish floor or ground.
306.3.3 Minimum Required Depth. Where knee clearance is required
under an element as part of a clear floor space, the knee clearance shall
be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the
finish floor or ground, and 8 inches (205 mm) deep minimum at 27
inches (685 mm) above the finish floor or ground.
A $OSS switch indicates what?
, daylight sensor
remote controlled switch
one single switch
occupancy sensor/switch combination - ANSWER ✔✔D. occupancy
sensor/switch combination // Refer to your drawing legend, as symbols
used may vary from what you are accustomed to, and could possibly
vary from test to test. This is the symbol provided on a typical NCIDQ
drawing that indicates occupancy sensor/switch combination.
What is minimum clear width of the doorway and maximum size of an
egress door?
34 clear width and 36 door leaf
32 clear width and 48 door leaf
34 clear width and 48 door leaf
30 clear width and 36 door leaf - ANSWER ✔✔B. 32 clear width and
48 door leaf // International Building Code 1008.1.1 Size of doors. The
minimum width of each door opening...shall provide a clear width of 32
inches (813 mm). Clear openings of doorways with swinging doors shall
be measured between the face of the door and the stop, with the door
open 90 degrees (1.57 rad). Where this section requires a minimum
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED