C-201 ELECTRICAL SYSTEMS 1 SACA
CERTIFICATION STUDYGUIDE EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Save
Terms in this set (91)
can you define and test a ground? a ground is a point in the circuit that is connected
to the earth. you can use a multimeter-If the
resistance is too high, it may indicate that the
ground connection is not providing adequate
protection
electrical safety rules 1.Always use a circuit tester or voltage detector to
check that a circuit is de-energized before
working on it.
electrical safety rule Never touch electrical wiring or equipment with
wet hands or while standing on a wet surface.
, electrical safety rule Do not operate electrical equipment that is
damaged, frayed, or otherwise in poor condition.
electrical safety rule Use the correct fuse or circuit breaker for the
circuit you are working on.
electrical safety rule Never remove or bypass the grounding prong on
a plug.
Electrical Safety Do not use extension cords or multiple outlet
adapters that are not rated for the equipment
you are using.
electrical safety Do not overload circuits by plugging in too many
devices or using high-powered equipment.
electrical safety Do not use electrical equipment in wet or damp
conditions unless it is specifically designed for
that purpose.
electrical safety Use properly rated and properly installed surge
protectors for sensitive electronic equipment.
electrical safety Always follow the manufacturer's instructions for
using electrical equipment.
purpose of lockout tag out to prevent unexpected energization or startup of
machinery or equipment while it is being serviced
or repaired.
CERTIFICATION STUDYGUIDE EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Save
Terms in this set (91)
can you define and test a ground? a ground is a point in the circuit that is connected
to the earth. you can use a multimeter-If the
resistance is too high, it may indicate that the
ground connection is not providing adequate
protection
electrical safety rules 1.Always use a circuit tester or voltage detector to
check that a circuit is de-energized before
working on it.
electrical safety rule Never touch electrical wiring or equipment with
wet hands or while standing on a wet surface.
, electrical safety rule Do not operate electrical equipment that is
damaged, frayed, or otherwise in poor condition.
electrical safety rule Use the correct fuse or circuit breaker for the
circuit you are working on.
electrical safety rule Never remove or bypass the grounding prong on
a plug.
Electrical Safety Do not use extension cords or multiple outlet
adapters that are not rated for the equipment
you are using.
electrical safety Do not overload circuits by plugging in too many
devices or using high-powered equipment.
electrical safety Do not use electrical equipment in wet or damp
conditions unless it is specifically designed for
that purpose.
electrical safety Use properly rated and properly installed surge
protectors for sensitive electronic equipment.
electrical safety Always follow the manufacturer's instructions for
using electrical equipment.
purpose of lockout tag out to prevent unexpected energization or startup of
machinery or equipment while it is being serviced
or repaired.
