AMMO 18 UPDATED EXAM TEST PAPER QUESTIONS
AND ANSWERS SURE A+
✔✔Which is not a shared requirement for vehicles transporting A&E both on-post and
off-post? - ✔✔use of DD 626, use of fire symbols, compatibility requirements, pre/post
inspection, extra blocking and bracing, correct documentaion
✔✔Which best describes ammunition residue? - ✔✔A
✔✔How does an LPS provide protection? - ✔✔A
✔✔Which three things can cause electromagnetic radiation (EMR)? - ✔✔B,C, and D
✔✔Which requirement is used when posting fire symbols outside a facility? - ✔✔the
highest hazard. A
✔✔Using the chemical group job aid, which two chemical hazard symbols are used for
storage locations with ammo containing HC smoke grenades? - ✔✔D and E
✔✔What is a characteristic of an above-ground magazine (AGM)? - ✔✔• Usually built
with fireproof materials • Provides greater storage space • Provides less protection from
blast/fragments
✔✔Which three housekeeping guidelines apply when storing A&E? - ✔✔A, B, and D
✔✔Which statement is not a general magazine safety rule? - ✔✔These are all good
general rules: Aisle space, Ammo on pallets, Data cards, Stable stacks, Closed
containers
✔✔In addition to removing/covering fire and chemical symbols, what two actions do you
take after emptying a magazine? - ✔✔A, and D
, ✔✔Which source can be used to find storage compatibility groups for ammo? -
✔✔Appendix B of the Yellow Book
✔✔Given two groups, F and S, and one location, - ✔✔Yes, safe
✔✔Given three groups, C, D, and F, and one location, use the storage compatibility
chart to determine if they are compatible for storage. - ✔✔Under certain conditions
✔✔Which requirement do you need to follow when storing rockets, rocket motors, and
missiles? - ✔✔C
✔✔Which two steps apply for damaged or leaking munitions or containers found in
storage? - ✔✔B, and C
✔✔What types of hazards does the RM process work to prevent? - ✔✔illness, injury, or
death
✔✔What is the purpose of a standing operating procedure (SOP)? - ✔✔standardized
set of detailed instructions on how to perform certain tasks. It prevents personnel injury,
property damage, and operation degradation by controlling work center hazards.
✔✔When working with ammo containing chemical fillers, where in the SOP would you
find personal protective equipment (PPE) requirements? - ✔✔B
✔✔Which two safety guidelines apply when heat sealing bags of ammo? - ✔✔B, and D
✔✔Which safety precaution applies to forklifts? - ✔✔A
✔✔Which is the correct placement of placards on trucks transporting A&E? - ✔✔D
✔✔Which best describes ammunition residue? - ✔✔A
✔✔Which is the purpose of a lightning protection system (LPS)? - ✔✔B
✔✔Which type of clothing should be worn in ammo work areas to minimize static
electricity? - ✔✔A
✔✔Which hazard is most damaging to ammunition? - ✔✔Fire and excessive heat
✔✔What is a characteristic of an earth-covered magazine (ECM)? - ✔✔D
AND ANSWERS SURE A+
✔✔Which is not a shared requirement for vehicles transporting A&E both on-post and
off-post? - ✔✔use of DD 626, use of fire symbols, compatibility requirements, pre/post
inspection, extra blocking and bracing, correct documentaion
✔✔Which best describes ammunition residue? - ✔✔A
✔✔How does an LPS provide protection? - ✔✔A
✔✔Which three things can cause electromagnetic radiation (EMR)? - ✔✔B,C, and D
✔✔Which requirement is used when posting fire symbols outside a facility? - ✔✔the
highest hazard. A
✔✔Using the chemical group job aid, which two chemical hazard symbols are used for
storage locations with ammo containing HC smoke grenades? - ✔✔D and E
✔✔What is a characteristic of an above-ground magazine (AGM)? - ✔✔• Usually built
with fireproof materials • Provides greater storage space • Provides less protection from
blast/fragments
✔✔Which three housekeeping guidelines apply when storing A&E? - ✔✔A, B, and D
✔✔Which statement is not a general magazine safety rule? - ✔✔These are all good
general rules: Aisle space, Ammo on pallets, Data cards, Stable stacks, Closed
containers
✔✔In addition to removing/covering fire and chemical symbols, what two actions do you
take after emptying a magazine? - ✔✔A, and D
, ✔✔Which source can be used to find storage compatibility groups for ammo? -
✔✔Appendix B of the Yellow Book
✔✔Given two groups, F and S, and one location, - ✔✔Yes, safe
✔✔Given three groups, C, D, and F, and one location, use the storage compatibility
chart to determine if they are compatible for storage. - ✔✔Under certain conditions
✔✔Which requirement do you need to follow when storing rockets, rocket motors, and
missiles? - ✔✔C
✔✔Which two steps apply for damaged or leaking munitions or containers found in
storage? - ✔✔B, and C
✔✔What types of hazards does the RM process work to prevent? - ✔✔illness, injury, or
death
✔✔What is the purpose of a standing operating procedure (SOP)? - ✔✔standardized
set of detailed instructions on how to perform certain tasks. It prevents personnel injury,
property damage, and operation degradation by controlling work center hazards.
✔✔When working with ammo containing chemical fillers, where in the SOP would you
find personal protective equipment (PPE) requirements? - ✔✔B
✔✔Which two safety guidelines apply when heat sealing bags of ammo? - ✔✔B, and D
✔✔Which safety precaution applies to forklifts? - ✔✔A
✔✔Which is the correct placement of placards on trucks transporting A&E? - ✔✔D
✔✔Which best describes ammunition residue? - ✔✔A
✔✔Which is the purpose of a lightning protection system (LPS)? - ✔✔B
✔✔Which type of clothing should be worn in ammo work areas to minimize static
electricity? - ✔✔A
✔✔Which hazard is most damaging to ammunition? - ✔✔Fire and excessive heat
✔✔What is a characteristic of an earth-covered magazine (ECM)? - ✔✔D
