FDNY F-60 – Fire Guard for Construction
Sites Newest (2025 - 2026 Update) From
Real Past Papers Questions – A Set Of
100 Most Common Exam Frequently
Tested Questions And Answers In
Details 100% Verified Exam Highly
Recommendable Grade A+ (Verified
Answers) Plus Rationales | Instant
Download Pdf
1. What is the primary responsibility of an F-60 Fire Guard at a construction
site?
A. Operate heavy equipment
B. Perform electrical inspections
C. Patrol the site to detect and prevent fire hazards
D. Install fire alarm systems
Answer: C. Patrol the site to detect and prevent fire hazards
The Fire Guard's primary duty is to continuously identify fire hazards, maintain a
safe environment, and take appropriate action if a fire or unsafe condition is
discovered.
, 2. Before beginning a fire watch, a Fire Guard should first:
A. Lock all exits
B. Become familiar with the site layout and emergency procedures
C. Disconnect electrical power
D. Remove all construction materials
Answer: B. Become familiar with the site layout and emergency procedures
Knowing the building layout, exits, fire protection equipment, and emergency
procedures allows the Fire Guard to respond quickly during an emergency.
3. A Fire Guard should immediately report which condition?
A. Clean work areas
B. Properly stored tools
C. Blocked exit pathways
D. Painted walls
Answer: C. Blocked exit pathways
Blocked means of egress create a serious life safety hazard and must be corrected
immediately.
4. During patrol, a Fire Guard discovers combustible debris accumulating
near welding operations. What should be done?
A. Ignore it until work is completed
B. Remove or have the debris removed before hot work continues
C. Spray water on the debris
D. Cover it with plastic
Answer: B. Remove or have the debris removed before hot work continues
,Combustible materials should be removed from hot work areas to reduce the risk
of ignition.
5. Which class of fire involves ordinary combustible materials such as wood
and paper?
A. Class B
B. Class C
C. Class A
D. Class D
Answer: C. Class A
Class A fires involve ordinary combustibles including wood, paper, cloth, and many
construction materials.
6. Which extinguisher is commonly used on Class A fires?
A. Dry chemical or water extinguisher
B. Cooking oil extinguisher only
C. Metal fire extinguisher only
D. Halon only
Answer: A. Dry chemical or water extinguisher
Water and multipurpose ABC dry chemical extinguishers are effective on most
Class A fires.
7. What does PASS stand for when using a portable fire extinguisher?
A. Pull, Aim, Squeeze, Sweep
B. Push, Alert, Spray, Stop
C. Pull, Alert, Spray, Sweep
D. Position, Activate, Spray, Secure
, Answer: A. Pull, Aim, Squeeze, Sweep
PASS describes the correct method for operating a portable fire extinguisher
safely.
8. If a fire cannot be controlled immediately, the Fire Guard should:
A. Continue fighting the fire alone
B. Leave without notifying anyone
C. Notify the Fire Department and begin emergency procedures
D. Wait for a supervisor
Answer: C. Notify the Fire Department and begin emergency procedures
Life safety is always the priority. Notify emergency responders and begin the site's
emergency procedures.
9. Hot work includes:
A. Painting walls
B. Welding, cutting, brazing, and soldering
C. Sweeping floors
D. Installing drywall
Answer: B. Welding, cutting, brazing, and soldering
Hot work produces heat, sparks, or open flames capable of igniting nearby
combustibles.
10.A Fire Guard should know the location of:
A. Coffee stations only
B. Fire extinguishers and emergency exits
C. Employee lockers only
D. Restrooms only
Sites Newest (2025 - 2026 Update) From
Real Past Papers Questions – A Set Of
100 Most Common Exam Frequently
Tested Questions And Answers In
Details 100% Verified Exam Highly
Recommendable Grade A+ (Verified
Answers) Plus Rationales | Instant
Download Pdf
1. What is the primary responsibility of an F-60 Fire Guard at a construction
site?
A. Operate heavy equipment
B. Perform electrical inspections
C. Patrol the site to detect and prevent fire hazards
D. Install fire alarm systems
Answer: C. Patrol the site to detect and prevent fire hazards
The Fire Guard's primary duty is to continuously identify fire hazards, maintain a
safe environment, and take appropriate action if a fire or unsafe condition is
discovered.
, 2. Before beginning a fire watch, a Fire Guard should first:
A. Lock all exits
B. Become familiar with the site layout and emergency procedures
C. Disconnect electrical power
D. Remove all construction materials
Answer: B. Become familiar with the site layout and emergency procedures
Knowing the building layout, exits, fire protection equipment, and emergency
procedures allows the Fire Guard to respond quickly during an emergency.
3. A Fire Guard should immediately report which condition?
A. Clean work areas
B. Properly stored tools
C. Blocked exit pathways
D. Painted walls
Answer: C. Blocked exit pathways
Blocked means of egress create a serious life safety hazard and must be corrected
immediately.
4. During patrol, a Fire Guard discovers combustible debris accumulating
near welding operations. What should be done?
A. Ignore it until work is completed
B. Remove or have the debris removed before hot work continues
C. Spray water on the debris
D. Cover it with plastic
Answer: B. Remove or have the debris removed before hot work continues
,Combustible materials should be removed from hot work areas to reduce the risk
of ignition.
5. Which class of fire involves ordinary combustible materials such as wood
and paper?
A. Class B
B. Class C
C. Class A
D. Class D
Answer: C. Class A
Class A fires involve ordinary combustibles including wood, paper, cloth, and many
construction materials.
6. Which extinguisher is commonly used on Class A fires?
A. Dry chemical or water extinguisher
B. Cooking oil extinguisher only
C. Metal fire extinguisher only
D. Halon only
Answer: A. Dry chemical or water extinguisher
Water and multipurpose ABC dry chemical extinguishers are effective on most
Class A fires.
7. What does PASS stand for when using a portable fire extinguisher?
A. Pull, Aim, Squeeze, Sweep
B. Push, Alert, Spray, Stop
C. Pull, Alert, Spray, Sweep
D. Position, Activate, Spray, Secure
, Answer: A. Pull, Aim, Squeeze, Sweep
PASS describes the correct method for operating a portable fire extinguisher
safely.
8. If a fire cannot be controlled immediately, the Fire Guard should:
A. Continue fighting the fire alone
B. Leave without notifying anyone
C. Notify the Fire Department and begin emergency procedures
D. Wait for a supervisor
Answer: C. Notify the Fire Department and begin emergency procedures
Life safety is always the priority. Notify emergency responders and begin the site's
emergency procedures.
9. Hot work includes:
A. Painting walls
B. Welding, cutting, brazing, and soldering
C. Sweeping floors
D. Installing drywall
Answer: B. Welding, cutting, brazing, and soldering
Hot work produces heat, sparks, or open flames capable of igniting nearby
combustibles.
10.A Fire Guard should know the location of:
A. Coffee stations only
B. Fire extinguishers and emergency exits
C. Employee lockers only
D. Restrooms only
