F62 Fire Watch for Torch Operations Newest (2025
- 2026 Update) From Real Past Papers Questions –
A Set Of 80 Most Common Exam Frequently Tested
Questions And Answers In Details 100% Verified
Exam Highly Recommendable Grade A+ (Verified
Answers) Plus Rationales | Instant Download Pdf
1. Before any torch operation begins, the Fire Watch's primary responsibility is
to:
A. Operate the torch equipment
B. Supervise all construction workers
C. Ensure fire safety is maintained before, during, and after hot work
D. Inspect electrical installations only
Answer: C
The Fire Watch is responsible for identifying fire hazards, monitoring the work
area, and responding immediately if a fire occurs before, during, and after hot
work operations.
2. Which of the following is considered hot work?
A. Painting walls
B. Welding and torch cutting
C. Installing carpet
D. Cleaning windows
Answer: B
Hot work includes welding, cutting, brazing, soldering, and torch operations
because these activities produce heat, sparks, or flames capable of starting a fire.
3. Before torch operations begin, combustible materials should be:
,A. Left in place
B. Covered with paper
C. Removed or properly protected
D. Sprayed with water regardless of material
Answer: C
Removing or protecting combustible materials greatly reduces the chance that
sparks or molten metal will ignite a fire.
4. A Fire Watch should remain on duty after hot work is completed for at least:
A. 10 minutes
B. 15 minutes
C. 30 minutes
D. 2 hours
Answer: C
The required fire watch period is generally at least 30 minutes after completion of
torch operations unless a longer period is required by site conditions or the
permit.
5. Which extinguisher should a Fire Watch have readily available during torch
operations?
A. Any empty extinguisher
B. A properly rated and fully charged fire extinguisher
C. A bucket of sand only
D. A garden hose only
Answer: B
The Fire Watch must have immediate access to a properly rated portable fire
extinguisher suitable for the hazards present.
6. The purpose of a hot work permit is to:
A. Replace building permits
B. Document that fire safety precautions have been taken
, C. Approve employee payroll
D. Eliminate the need for a Fire Watch
Answer: B
The hot work permit confirms that hazards have been evaluated and required fire
protection measures are in place.
7. Sparks from torch operations may travel:
A. Only a few inches
B. Up to several feet and ignite combustibles
C. Only straight downward
D. Only when indoors
Answer: B
Hot sparks can travel considerable distances and ignite combustible materials
outside the immediate work area.
8. If a fire starts and cannot be immediately extinguished, the Fire Watch
should:
A. Ignore it
B. Continue working
C. Activate the alarm, notify emergency services, and evacuate if necessary
D. Finish the torch operation first
Answer: C
Life safety is the priority. The Fire Watch should sound the alarm, notify
emergency responders, and follow emergency procedures.
9. Oxygen cylinders should be stored:
A. Beside fuel gas cylinders without separation
B. Secured in an upright position
C. Lying on the ground
D. Near open flames
- 2026 Update) From Real Past Papers Questions –
A Set Of 80 Most Common Exam Frequently Tested
Questions And Answers In Details 100% Verified
Exam Highly Recommendable Grade A+ (Verified
Answers) Plus Rationales | Instant Download Pdf
1. Before any torch operation begins, the Fire Watch's primary responsibility is
to:
A. Operate the torch equipment
B. Supervise all construction workers
C. Ensure fire safety is maintained before, during, and after hot work
D. Inspect electrical installations only
Answer: C
The Fire Watch is responsible for identifying fire hazards, monitoring the work
area, and responding immediately if a fire occurs before, during, and after hot
work operations.
2. Which of the following is considered hot work?
A. Painting walls
B. Welding and torch cutting
C. Installing carpet
D. Cleaning windows
Answer: B
Hot work includes welding, cutting, brazing, soldering, and torch operations
because these activities produce heat, sparks, or flames capable of starting a fire.
3. Before torch operations begin, combustible materials should be:
,A. Left in place
B. Covered with paper
C. Removed or properly protected
D. Sprayed with water regardless of material
Answer: C
Removing or protecting combustible materials greatly reduces the chance that
sparks or molten metal will ignite a fire.
4. A Fire Watch should remain on duty after hot work is completed for at least:
A. 10 minutes
B. 15 minutes
C. 30 minutes
D. 2 hours
Answer: C
The required fire watch period is generally at least 30 minutes after completion of
torch operations unless a longer period is required by site conditions or the
permit.
5. Which extinguisher should a Fire Watch have readily available during torch
operations?
A. Any empty extinguisher
B. A properly rated and fully charged fire extinguisher
C. A bucket of sand only
D. A garden hose only
Answer: B
The Fire Watch must have immediate access to a properly rated portable fire
extinguisher suitable for the hazards present.
6. The purpose of a hot work permit is to:
A. Replace building permits
B. Document that fire safety precautions have been taken
, C. Approve employee payroll
D. Eliminate the need for a Fire Watch
Answer: B
The hot work permit confirms that hazards have been evaluated and required fire
protection measures are in place.
7. Sparks from torch operations may travel:
A. Only a few inches
B. Up to several feet and ignite combustibles
C. Only straight downward
D. Only when indoors
Answer: B
Hot sparks can travel considerable distances and ignite combustible materials
outside the immediate work area.
8. If a fire starts and cannot be immediately extinguished, the Fire Watch
should:
A. Ignore it
B. Continue working
C. Activate the alarm, notify emergency services, and evacuate if necessary
D. Finish the torch operation first
Answer: C
Life safety is the priority. The Fire Watch should sound the alarm, notify
emergency responders, and follow emergency procedures.
9. Oxygen cylinders should be stored:
A. Beside fuel gas cylinders without separation
B. Secured in an upright position
C. Lying on the ground
D. Near open flames
