360 TRAINING OSHA 30 CORRECT
COMPREHENSIVE QUESTIONS AND ANSWERS
SURE A+
✔✔Activity: Avoiding Struck-by Hazards
Which of these workers is most at risk of being struck by a flying object? - ✔✔the one
with no hardhat or glasses on
✔✔Activity: Avoiding Struck-by Hazards
Which group of workers is most at risk of being involved in a struck-by incident while
constructing a concrete or masonry wall? - ✔✔the group with the most people standing
around and the wheelbarrow guy just chillin
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of being caught in a cave-in? - ✔✔the one
without a trench box
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of being caught in machinery? - ✔✔the one
rockin hella gold chains
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of having a powered industrial truck accident? -
✔✔homie standing on the forks
✔✔A personal fall-arrest system must be secured properly to a(n) (blank) -
✔✔Anchorage point
✔✔Fall protection measures are required when workers are exposed to a possible fall
of (blank) or more to a lower level. - ✔✔6 feet
,✔✔A (blank) refers to an area at a worksite where certain hazardous work is taking
place without the use of guardrails or PFASs. - ✔✔Controlled Access Zone (CAZ)
✔✔Locking out and tagging out refers to the practice of: - ✔✔Applying locks to the
power source after de-energizing, Tagging deactivated controls and power sources to
indicate they should not be used, tagging de-energized equipment and circuits at all
points where they could be energized, all of the above
✔✔Which of the following can be used to protect a trench 5-feet or more in depth? -
✔✔sloping, shoring, benching, all of the above
✔✔When a crane is moving a load, it operates within a (blank); if a worker is within that
area, they could be caught-in/between the crane or its load and either the ground, a
structure, or another piece of equipment. - ✔✔swing radius
✔✔PPE for power tools and equipment should include: - ✔✔safety glasses, face shield,
hard hat, all of the above
✔✔Cranes, ladders, scaffolds, backhoes, and paint rollers all present which type of
electrical hazard at a worksite - ✔✔contact with overhead powerlines
✔✔The Maintenance of Traffic (MOT) zone in a traffic control plan that provides the first
indication to motorists that there is upcoming construction work is called the _____ -
✔✔Advanced Warning Area
✔✔which of the following is true of an arc flash? - ✔✔It could have a temperature
exceeding 35,000°F,
It occurs when a flashover of electric current leaves its intended path and travels
through the air,
In addition to burns, it can damage workers' eyesight and hearing, all of the above
✔✔Which of the following roof slope ratios qualifies as low-slope? - ✔✔4:12
✔✔(blank) are a common cause of struck-by accidents at worksites and can sometimes
be prevented by using back-up alarms. - ✔✔heavy vehicles
✔✔Which of the following is an example of a direct electrical injury? - ✔✔burns to the
skin caused by electric flash
✔✔A (blank) lanyard fall-arrest systems slows and eventually stops descent and
absorbs the forces that could otherwise injure the worker. - ✔✔Shock-absorbing
, ✔✔Who is responsible for providing the following when needed? (employer vs
employee) - ✔✔Employer:
Respirator
Boots only used at work
Hard hat
Earmuffs
Gloves
Safety Glasses
Employee:
Warm Clothing
Sunscreen
Boots used outside of work
Socks
✔✔The units "decibels" are used to measure (blank) - ✔✔loudness
✔✔which of the following is the employee's responsibility? - ✔✔Wearing PPE in
accordance with their training
✔✔A (blank) can occur when you repeat the same movement again and again over a
long period of time - ✔✔Repetitive motion injury
✔✔Which of the following is an example of a hazard for which employers must provide
PPE? - ✔✔Sharp objects, Noise, Harmful fumes, all of the above
✔✔Which of the following characteristics must be present on all hard hats? - ✔✔A
suspension system installed
✔✔The new ASTM standards for footwear specify that it should: - ✔✔Be impact and
compression resistant at the toe, reduce electrical conductivity to prevent static ignition
of flammable gases, and be puncture resistant, all of the above
✔✔(blank) are a type of eye protection that completely encloses the eyes and the facial
area immediately surrounding the eyes. - ✔✔Safety goggles
✔✔When workers may be exposed to (blank) employers must also provide ___ within
no more than 10 seconds of the worksite - ✔✔corrosive materials, eyewash stations
✔✔(blank) respirators use a filter to purify the air as the worker breathes it in. - ✔✔Air-
purifying
✔✔To find the proper firefighting measures for a hazardous substance on a worksite,
employees should be able to look at: - ✔✔The safety data sheet (SDS)
COMPREHENSIVE QUESTIONS AND ANSWERS
SURE A+
✔✔Activity: Avoiding Struck-by Hazards
Which of these workers is most at risk of being struck by a flying object? - ✔✔the one
with no hardhat or glasses on
✔✔Activity: Avoiding Struck-by Hazards
Which group of workers is most at risk of being involved in a struck-by incident while
constructing a concrete or masonry wall? - ✔✔the group with the most people standing
around and the wheelbarrow guy just chillin
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of being caught in a cave-in? - ✔✔the one
without a trench box
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of being caught in machinery? - ✔✔the one
rockin hella gold chains
✔✔Activity: Avoiding Caught-Between Hazards
Which of these workers is most at risk of having a powered industrial truck accident? -
✔✔homie standing on the forks
✔✔A personal fall-arrest system must be secured properly to a(n) (blank) -
✔✔Anchorage point
✔✔Fall protection measures are required when workers are exposed to a possible fall
of (blank) or more to a lower level. - ✔✔6 feet
,✔✔A (blank) refers to an area at a worksite where certain hazardous work is taking
place without the use of guardrails or PFASs. - ✔✔Controlled Access Zone (CAZ)
✔✔Locking out and tagging out refers to the practice of: - ✔✔Applying locks to the
power source after de-energizing, Tagging deactivated controls and power sources to
indicate they should not be used, tagging de-energized equipment and circuits at all
points where they could be energized, all of the above
✔✔Which of the following can be used to protect a trench 5-feet or more in depth? -
✔✔sloping, shoring, benching, all of the above
✔✔When a crane is moving a load, it operates within a (blank); if a worker is within that
area, they could be caught-in/between the crane or its load and either the ground, a
structure, or another piece of equipment. - ✔✔swing radius
✔✔PPE for power tools and equipment should include: - ✔✔safety glasses, face shield,
hard hat, all of the above
✔✔Cranes, ladders, scaffolds, backhoes, and paint rollers all present which type of
electrical hazard at a worksite - ✔✔contact with overhead powerlines
✔✔The Maintenance of Traffic (MOT) zone in a traffic control plan that provides the first
indication to motorists that there is upcoming construction work is called the _____ -
✔✔Advanced Warning Area
✔✔which of the following is true of an arc flash? - ✔✔It could have a temperature
exceeding 35,000°F,
It occurs when a flashover of electric current leaves its intended path and travels
through the air,
In addition to burns, it can damage workers' eyesight and hearing, all of the above
✔✔Which of the following roof slope ratios qualifies as low-slope? - ✔✔4:12
✔✔(blank) are a common cause of struck-by accidents at worksites and can sometimes
be prevented by using back-up alarms. - ✔✔heavy vehicles
✔✔Which of the following is an example of a direct electrical injury? - ✔✔burns to the
skin caused by electric flash
✔✔A (blank) lanyard fall-arrest systems slows and eventually stops descent and
absorbs the forces that could otherwise injure the worker. - ✔✔Shock-absorbing
, ✔✔Who is responsible for providing the following when needed? (employer vs
employee) - ✔✔Employer:
Respirator
Boots only used at work
Hard hat
Earmuffs
Gloves
Safety Glasses
Employee:
Warm Clothing
Sunscreen
Boots used outside of work
Socks
✔✔The units "decibels" are used to measure (blank) - ✔✔loudness
✔✔which of the following is the employee's responsibility? - ✔✔Wearing PPE in
accordance with their training
✔✔A (blank) can occur when you repeat the same movement again and again over a
long period of time - ✔✔Repetitive motion injury
✔✔Which of the following is an example of a hazard for which employers must provide
PPE? - ✔✔Sharp objects, Noise, Harmful fumes, all of the above
✔✔Which of the following characteristics must be present on all hard hats? - ✔✔A
suspension system installed
✔✔The new ASTM standards for footwear specify that it should: - ✔✔Be impact and
compression resistant at the toe, reduce electrical conductivity to prevent static ignition
of flammable gases, and be puncture resistant, all of the above
✔✔(blank) are a type of eye protection that completely encloses the eyes and the facial
area immediately surrounding the eyes. - ✔✔Safety goggles
✔✔When workers may be exposed to (blank) employers must also provide ___ within
no more than 10 seconds of the worksite - ✔✔corrosive materials, eyewash stations
✔✔(blank) respirators use a filter to purify the air as the worker breathes it in. - ✔✔Air-
purifying
✔✔To find the proper firefighting measures for a hazardous substance on a worksite,
employees should be able to look at: - ✔✔The safety data sheet (SDS)
