G3 TSSA Riley Questions And Answers / 100% Correct Q&A
1. A class B fire extinguisher:
A) is to be used on fires involving cooking oils, trans-fats,
or fats in cooking appliances
and are typically found in restaurant and cafeteria
kitchens.
B) is to be used on fires involving combustible materials
such as paper, wood, cardboard, and most
D
plastics.
C) is to be used on fires involving chemicals such as
combustibles metals, such as magnesium,
titanium, potassium and sodium.
D) is to be used on fires involving flammable of com-
bustible liquids such as gasoline, kerosene,
grease and oil.
3. Which of the following statements is true?
A) workers do not have to wear hard hats on a job site,
even if instructed not to do so by employer
B) workers must wear the protective clothing that the
employer instructs them to wear on the job site
b
C) Workers do not have to be aware of the contents of the
occupational health and safety act.
D) Unnecessary running or rough or boisterous conduct
on job sites is NOT prohibited by the occupational health
and safety act
4. Which of the following regulates workplace safety:
A) The Province of Ontario Unit 1 page 11
B) The Natural Gas and Propane Installation Code A
C) The Federal Government
D) The National Building Code
, G3 TSSA Riley Questions And Answers / 100% Correct Q&A
5. An employer of a Gas Technician is:
A) responsible for ensuring the technician are appropri-
ately certified
B) not responsible for ensuring that safety instruction is
A
provided to workers
C) responsible for ensuring that workers arrive safely on
the jobsite
D) responsible for providing all safety clothing to workers
11. To determine the indicated gas pressure on a "simple"
or traditional water-filled "U" tube
manometer.
A) read the amount of water column displaced on the
pressure side
C
B) read the amount of water column displaced on the
atmospheric side
C) read the amount of water column displaced on the
pressure side and add it to the amount displaced on
the atmospheric side
14. Sheathing on copper wire should be removed with:
A) knife
B) pliers D
C) side cutters
D) a wire stripper
15. A reading of 7.0" w.c equals:
A) ¼ psig
B) ½ psig A
C) ¾ psig
D) 1 psig
16. How should an electric drill be disconnected?
A) by pulling on the drills cord
, G3 TSSA Riley Questions And Answers / 100% Correct Q&A
B) by pulling the plug at the outlet
C) by using a pair of insulated channel lock pliers B
D) with the chuck key
17. What type of fastener is used to join two electrical
wires:
A) electrical bounding clamp C
B) BX connector
C) wire nut (marrett
18. Lag shield anchors are generally used to anchor fas-
teners into:
steel
A) D
B) wood
C) plastic
D) concrete
19. What is the volume of a room measuring 16' x 12' x 7'
A) 84 square feet
B) 192 cubic feet C
C) 1344 cubic feet
D) 16,128 square feet
20. A carbide tipped bit is used to drill into:
A) stainless steel
B) wood D
C) plastic
D) concrete
21. The heat content of 1 cubic foot of natural gas is
approximately:
1,000 Btu
A) A
B) 2,520 Btu
C) 10,000 Btu
D) 25,000 Btu
1. A class B fire extinguisher:
A) is to be used on fires involving cooking oils, trans-fats,
or fats in cooking appliances
and are typically found in restaurant and cafeteria
kitchens.
B) is to be used on fires involving combustible materials
such as paper, wood, cardboard, and most
D
plastics.
C) is to be used on fires involving chemicals such as
combustibles metals, such as magnesium,
titanium, potassium and sodium.
D) is to be used on fires involving flammable of com-
bustible liquids such as gasoline, kerosene,
grease and oil.
3. Which of the following statements is true?
A) workers do not have to wear hard hats on a job site,
even if instructed not to do so by employer
B) workers must wear the protective clothing that the
employer instructs them to wear on the job site
b
C) Workers do not have to be aware of the contents of the
occupational health and safety act.
D) Unnecessary running or rough or boisterous conduct
on job sites is NOT prohibited by the occupational health
and safety act
4. Which of the following regulates workplace safety:
A) The Province of Ontario Unit 1 page 11
B) The Natural Gas and Propane Installation Code A
C) The Federal Government
D) The National Building Code
, G3 TSSA Riley Questions And Answers / 100% Correct Q&A
5. An employer of a Gas Technician is:
A) responsible for ensuring the technician are appropri-
ately certified
B) not responsible for ensuring that safety instruction is
A
provided to workers
C) responsible for ensuring that workers arrive safely on
the jobsite
D) responsible for providing all safety clothing to workers
11. To determine the indicated gas pressure on a "simple"
or traditional water-filled "U" tube
manometer.
A) read the amount of water column displaced on the
pressure side
C
B) read the amount of water column displaced on the
atmospheric side
C) read the amount of water column displaced on the
pressure side and add it to the amount displaced on
the atmospheric side
14. Sheathing on copper wire should be removed with:
A) knife
B) pliers D
C) side cutters
D) a wire stripper
15. A reading of 7.0" w.c equals:
A) ¼ psig
B) ½ psig A
C) ¾ psig
D) 1 psig
16. How should an electric drill be disconnected?
A) by pulling on the drills cord
, G3 TSSA Riley Questions And Answers / 100% Correct Q&A
B) by pulling the plug at the outlet
C) by using a pair of insulated channel lock pliers B
D) with the chuck key
17. What type of fastener is used to join two electrical
wires:
A) electrical bounding clamp C
B) BX connector
C) wire nut (marrett
18. Lag shield anchors are generally used to anchor fas-
teners into:
steel
A) D
B) wood
C) plastic
D) concrete
19. What is the volume of a room measuring 16' x 12' x 7'
A) 84 square feet
B) 192 cubic feet C
C) 1344 cubic feet
D) 16,128 square feet
20. A carbide tipped bit is used to drill into:
A) stainless steel
B) wood D
C) plastic
D) concrete
21. The heat content of 1 cubic foot of natural gas is
approximately:
1,000 Btu
A) A
B) 2,520 Btu
C) 10,000 Btu
D) 25,000 Btu
