MODULE 8 REVIEW QUESTIONS WITH ANSWERS
The lightest duty and most widely used non flexible conduit is - ans-
cv cv cv cv cv cv cv cv cv cv cv cvcv
electrical metallic tubing cv cv
which of the following is often referred to as thin wall conduit - ans-EMT
cv cv cv cv cv cv cv cv cv cv cv cv cvcv
NEC article 358 covers - ans-EMT
cv cv cv cv cvcv
in order to resist corrosion in wet environments EMT is - ans-galvanized
cv cv cv cv cv cv cv cv cv cv cvcv
RMC is made of - ans-steel or aluminum
cv cv cv cv cvcv cv cv
A type of conduit that should be used when corrosion is a factor is - ans-PVC
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
which of the following is true with regard to PVC - ans-
cv cv cv cv cv cv cv cv cv cv cvcv
it requires the use of expansion joints to avoid damage due to temperature changes
cv cv cv cv cv cv cv cv cv cv cv cv cv
a type of conduit approved for direct burial is - ans-HDPE
cv cv cv cv cv cv cv cv cv cvcv
the type of conduit used to connect machines that vibrate during operation is - ans-
cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
flexible metal conduit cv cv
which of the following is an acceptable combination of conduit bends between pull joints -
cv cv cv cv cv cv cv cv cv cv cv cv cv cv
ans-four 90 degree bends
cvcv cv cv cv
the fitting used to protect conductors from the sharp edges of conduit where it enters is calle
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv
d a - ans-bushing
cv cv cvcv
ungrounded conductors entering a Raceway must be protected by bushings when they are
cv cv cv cv cv cv cv cv cv cv cv cv cv
size No. - ans-4 AWG and larger
cv cv cvcv cv cv cv
to avoid having to make an offset bend use a fitting known as a - ans-nipple
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
it type lb conduit body has a cover on - ans-the back
cv cv cv cv cv cv cv cv cv cvcv cv
a type of conduit body used to provide a pull point on a straight conduit run is - ans-type c
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv cv
a type of conduit body used at four intersecting conduits is - ans-type x
cv cv cv cv cv cv cv cv cv cv cv cvcv cv
a type L conduit body that has a cover on both sides is a - ans-type lrl
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv cv
The lightest duty and most widely used non flexible conduit is - ans-
cv cv cv cv cv cv cv cv cv cv cv cvcv
electrical metallic tubing cv cv
which of the following is often referred to as thin wall conduit - ans-EMT
cv cv cv cv cv cv cv cv cv cv cv cv cvcv
NEC article 358 covers - ans-EMT
cv cv cv cv cvcv
in order to resist corrosion in wet environments EMT is - ans-galvanized
cv cv cv cv cv cv cv cv cv cv cvcv
RMC is made of - ans-steel or aluminum
cv cv cv cv cvcv cv cv
A type of conduit that should be used when corrosion is a factor is - ans-PVC
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
which of the following is true with regard to PVC - ans-
cv cv cv cv cv cv cv cv cv cv cvcv
it requires the use of expansion joints to avoid damage due to temperature changes
cv cv cv cv cv cv cv cv cv cv cv cv cv
a type of conduit approved for direct burial is - ans-HDPE
cv cv cv cv cv cv cv cv cv cvcv
the type of conduit used to connect machines that vibrate during operation is - ans-
cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
flexible metal conduit cv cv
which of the following is an acceptable combination of conduit bends between pull joints -
cv cv cv cv cv cv cv cv cv cv cv cv cv cv
ans-four 90 degree bends
cvcv cv cv cv
the fitting used to protect conductors from the sharp edges of conduit where it enters is calle
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv
d a - ans-bushing
cv cv cvcv
ungrounded conductors entering a Raceway must be protected by bushings when they are
cv cv cv cv cv cv cv cv cv cv cv cv cv
size No. - ans-4 AWG and larger
cv cv cvcv cv cv cv
to avoid having to make an offset bend use a fitting known as a - ans-nipple
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv
it type lb conduit body has a cover on - ans-the back
cv cv cv cv cv cv cv cv cv cvcv cv
a type of conduit body used to provide a pull point on a straight conduit run is - ans-type c
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv cv
a type of conduit body used at four intersecting conduits is - ans-type x
cv cv cv cv cv cv cv cv cv cv cv cvcv cv
a type L conduit body that has a cover on both sides is a - ans-type lrl
cv cv cv cv cv cv cv cv cv cv cv cv cv cv cvcv cv
