COLORADO FIRE ALARM SYSTEM CONTRACTOR
LICENSING EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) Q&A 2026 |
INSTANT DOWNLOAD PDF
1. What is the primary purpose of a fire alarm system?
A. To extinguish fires automatically
B. To detect and alert occupants of fire or smoke conditions
C. To provide emergency lighting only
D. To replace fire sprinklers
Rationale: Fire alarm systems are designed to detect fire
conditions early and notify occupants and emergency
responders. They do not extinguish fires.
Correct Answer: B
2. Which organization publishes widely adopted fire alarm
installation standards in the U.S.?
A. OSHA
B. NFPA
C. EPA
D. ANSI only
Rationale: The National Fire Protection Association (NFPA)
publishes NFPA 72, the National Fire Alarm and Signaling Code.
Correct Answer: B
,3. NFPA 72 primarily governs:
A. Electrical wiring methods
B. Fire alarm system installation and maintenance
C. Building structural design
D. HVAC systems
Rationale: NFPA 72 is the standard for fire alarm and signaling
systems.
Correct Answer: B
4. A initiating device in a fire alarm system is used to:
A. Sound alarms
B. Supply power
C. Detect fire conditions
D. Control sprinkler valves
Rationale: Initiating devices include smoke detectors, heat
detectors, and pull stations.
Correct Answer: C
5. Which of the following is an example of an initiating
device?
A. Horn/strobe
B. Control panel
,C. Smoke detector
D. Annunciator
Rationale: Smoke detectors sense smoke and initiate an alarm
signal.
Correct Answer: C
6. A notification appliance is used to:
A. Detect fire
B. Notify occupants of an alarm condition
C. Store system data
D. Control wiring circuits
Rationale: Notification appliances include horns, strobes, and
speakers.
Correct Answer: B
7. Which device is considered a notification appliance?
A. Heat detector
B. Manual pull station
C. Horn/strobe
D. Smoke beam detector
Rationale: Horn/strobe units alert occupants through sound
and light.
Correct Answer: C
, 8. The fire alarm control panel (FACP) is responsible for:
A. Detecting smoke directly
B. Monitoring and controlling the entire fire alarm system
C. Sprinkler activation
D. Air circulation control
Rationale: The FACP processes signals from initiating devices
and activates outputs.
Correct Answer: B
9. Which type of fire alarm system covers the entire building?
A. Manual system
B. Partial system
C. Complete (full) system
D. Local-only system
Rationale: A complete system monitors all required areas of a
building.
Correct Answer: C
10. A manual fire alarm system is activated by:
A. Smoke detectors
B. Heat sensors
C. Human action (pull station or button)
D. Water flow switches
LICENSING EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) Q&A 2026 |
INSTANT DOWNLOAD PDF
1. What is the primary purpose of a fire alarm system?
A. To extinguish fires automatically
B. To detect and alert occupants of fire or smoke conditions
C. To provide emergency lighting only
D. To replace fire sprinklers
Rationale: Fire alarm systems are designed to detect fire
conditions early and notify occupants and emergency
responders. They do not extinguish fires.
Correct Answer: B
2. Which organization publishes widely adopted fire alarm
installation standards in the U.S.?
A. OSHA
B. NFPA
C. EPA
D. ANSI only
Rationale: The National Fire Protection Association (NFPA)
publishes NFPA 72, the National Fire Alarm and Signaling Code.
Correct Answer: B
,3. NFPA 72 primarily governs:
A. Electrical wiring methods
B. Fire alarm system installation and maintenance
C. Building structural design
D. HVAC systems
Rationale: NFPA 72 is the standard for fire alarm and signaling
systems.
Correct Answer: B
4. A initiating device in a fire alarm system is used to:
A. Sound alarms
B. Supply power
C. Detect fire conditions
D. Control sprinkler valves
Rationale: Initiating devices include smoke detectors, heat
detectors, and pull stations.
Correct Answer: C
5. Which of the following is an example of an initiating
device?
A. Horn/strobe
B. Control panel
,C. Smoke detector
D. Annunciator
Rationale: Smoke detectors sense smoke and initiate an alarm
signal.
Correct Answer: C
6. A notification appliance is used to:
A. Detect fire
B. Notify occupants of an alarm condition
C. Store system data
D. Control wiring circuits
Rationale: Notification appliances include horns, strobes, and
speakers.
Correct Answer: B
7. Which device is considered a notification appliance?
A. Heat detector
B. Manual pull station
C. Horn/strobe
D. Smoke beam detector
Rationale: Horn/strobe units alert occupants through sound
and light.
Correct Answer: C
, 8. The fire alarm control panel (FACP) is responsible for:
A. Detecting smoke directly
B. Monitoring and controlling the entire fire alarm system
C. Sprinkler activation
D. Air circulation control
Rationale: The FACP processes signals from initiating devices
and activates outputs.
Correct Answer: B
9. Which type of fire alarm system covers the entire building?
A. Manual system
B. Partial system
C. Complete (full) system
D. Local-only system
Rationale: A complete system monitors all required areas of a
building.
Correct Answer: C
10. A manual fire alarm system is activated by:
A. Smoke detectors
B. Heat sensors
C. Human action (pull station or button)
D. Water flow switches
