NCATT AET & AEIT ENDORSEMENT EXAM
/EMI ,GROUNDING,BONDING,TSO,PMA &
AIRCRAFT WIRING EXAM WITH CORRECT
ACTUAL QUESTIONS AND CORRECTLY
WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Record Keeping - ANSWERS-The Work Order Form
Amended Equipment List
Service Bulletins and/or AD compliance sheets
Copies of manufacturers technical data
Function test and/or calibration results
Configuration data
Component traveler
Copies of Return to Service documents
Return to Service of an article after maintenance/ alteration
will include: - ANSWERS-Log book entry
FAA Form 337 for major repair or alteration
, Amended Equipment List
calibrated equipment - ANSWERS-check that test equipment
has current calibration label attached,
Hardware Identification - ANSWERS-AN - Air Force Navy
Standard
NAS - National Aircraft Standard
What prevents RFI? - ANSWERS-Grounding and bonding
BONDING JUMPER length - ANSWERS-Bonding jumpers
should be kept as short as practicable, and installed so that
the resistance of each connection does not exceed 0.003
ohm. The jumper should not interfere with the operation of
movable aircraft elements, such as surface controls; normal
movement of these elements should not result in damage
to the bonding jumper.
Bonding and grounding surface prep - ANSWERS-To be sure
a low resistance connection has been made, nonconducting
finishes, such as paint and anodizing films, should be
removed from the surface to be contacted by the bonding
terminal.
/EMI ,GROUNDING,BONDING,TSO,PMA &
AIRCRAFT WIRING EXAM WITH CORRECT
ACTUAL QUESTIONS AND CORRECTLY
WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Record Keeping - ANSWERS-The Work Order Form
Amended Equipment List
Service Bulletins and/or AD compliance sheets
Copies of manufacturers technical data
Function test and/or calibration results
Configuration data
Component traveler
Copies of Return to Service documents
Return to Service of an article after maintenance/ alteration
will include: - ANSWERS-Log book entry
FAA Form 337 for major repair or alteration
, Amended Equipment List
calibrated equipment - ANSWERS-check that test equipment
has current calibration label attached,
Hardware Identification - ANSWERS-AN - Air Force Navy
Standard
NAS - National Aircraft Standard
What prevents RFI? - ANSWERS-Grounding and bonding
BONDING JUMPER length - ANSWERS-Bonding jumpers
should be kept as short as practicable, and installed so that
the resistance of each connection does not exceed 0.003
ohm. The jumper should not interfere with the operation of
movable aircraft elements, such as surface controls; normal
movement of these elements should not result in damage
to the bonding jumper.
Bonding and grounding surface prep - ANSWERS-To be sure
a low resistance connection has been made, nonconducting
finishes, such as paint and anodizing films, should be
removed from the surface to be contacted by the bonding
terminal.
