Motorcycle Test Questions with Correct Answers
Street motorcycles are designed for:
Use on public streets.
tachometer
Indicates engine speed in revolutions per minute, rpm. It has a red line for engine speed that
should never be exceeded.
To stop the engine:
Thumb, key.
Friction Zone
is a small area in the travel of the clutch lever that controls the connection between the engine
and the rear wheel.
At higher speeds, you initiate a change of direction by:
first pressing (forward or down) the handgrip on the same side of the intended turn.
Search-Setup-Smooth
While approaching and going through a curve, scan for key information.
Adjust speed and lane position as necessary before entering.
Operate the controls so there are no jerky movements.
It is important to develop the habit of using both brakes:
so you can use them properly if a quick stop is needed.
, If a helmet has an impact,
it should be inspected and replaced as necessary. Damage may not be visible.
Flaps and Fasteners
Seal out the wind, and there may be zippers for ventilation.
Crashes
If they ever happen, occur mostly in curves and at intersections.
Usually there are many factors that interact, or combine:
to result in a crash.
Have a space cushion and escape path:
so you can respond smoothly to situations and do not have to react quickly to an emergency.
Risk offset
Is the difference between the risks you take and the skills you possess.
Presentation
means to use a lane position where others have a better chance to see you.
4-second urgent time and distance
You also can react to an object in the road that a vehicle straddles or steers around, such as a tire
carcass, muffler, block of wood or something that fell out of the back of a truck. You may need
all of that space to bring your motorcycle to a safe stop.
It is best to have more than one escape path open
Street motorcycles are designed for:
Use on public streets.
tachometer
Indicates engine speed in revolutions per minute, rpm. It has a red line for engine speed that
should never be exceeded.
To stop the engine:
Thumb, key.
Friction Zone
is a small area in the travel of the clutch lever that controls the connection between the engine
and the rear wheel.
At higher speeds, you initiate a change of direction by:
first pressing (forward or down) the handgrip on the same side of the intended turn.
Search-Setup-Smooth
While approaching and going through a curve, scan for key information.
Adjust speed and lane position as necessary before entering.
Operate the controls so there are no jerky movements.
It is important to develop the habit of using both brakes:
so you can use them properly if a quick stop is needed.
, If a helmet has an impact,
it should be inspected and replaced as necessary. Damage may not be visible.
Flaps and Fasteners
Seal out the wind, and there may be zippers for ventilation.
Crashes
If they ever happen, occur mostly in curves and at intersections.
Usually there are many factors that interact, or combine:
to result in a crash.
Have a space cushion and escape path:
so you can respond smoothly to situations and do not have to react quickly to an emergency.
Risk offset
Is the difference between the risks you take and the skills you possess.
Presentation
means to use a lane position where others have a better chance to see you.
4-second urgent time and distance
You also can react to an object in the road that a vehicle straddles or steers around, such as a tire
carcass, muffler, block of wood or something that fell out of the back of a truck. You may need
all of that space to bring your motorcycle to a safe stop.
It is best to have more than one escape path open
