IDPX Practice Tests Exam Questions with 100% Correct Answers Latest Graded A+

IDPX Practice Tests Exam Questions with 100% Correct Answers
Latest Graded A+


Question:
The 3-part technical sections in the CSI Master Format specs refer to:
Answer:
general, products, execution


Question:
What is the typical term used to describe the furniture sales agreement between the client and
interior designer?
Answer:
proposal


Question:
Which veneer cut would result in the least veneer waste, but be the least desirable to use for the
table?
Answer:
rotary slicing


Question:
When estimating how much fabric will be required for custom designed draperies, which needs to
be considered hen determining total fabric width needed?
Answer:
opening size, amount of fullness, the return, the stacking space, any overlap of 2 sections of drapery


Question:
What is the characteristic of a Class I fire-rated carpet?
Answer:
does not ignite


Question:

,The Flooring Radiant Panel Test
Answer:
measures the lowest level of radiant energy necessary for a fire to CONTINUE to burn


Question:
During installation, who is ultimately responsible for product assembly?
Answer:
the vendor or sell or of the goods


Question:
What is the best installation for slate flooring?
Answer:
thick-set application using a cleavage membrane; because slate does not have a uniform thickness


Question:
thick-set method for flooring
Answer:
allows the tile setter to adjust the bed according to the exact thickness of each stone, and a cleavage
membrane allows the finish floor to float above any slight deflection


This is an example of what:

Division 9 - Finishes

9100 Metal Support Assmeblies

9200 Plaster and Gypsum Board

9300 Tile

Question:
9400 Terrazzo
Answer:
MasterFormat


Question:

,Which puts more responsibility on the designer, can be used to explore unique design solutions and
the use of new technology, are used to set criteria rather than requirements, and must be
coordinated with the AHJ for final approval?
Answer:
performance codes


Question:
Prescriptive specifications tell:
Answer:
what product or material the contract must use by brand name


Question:
Performance specifications tell:
Answer:
what results the final construction assembly must achieve, but they give the contractor some choice
in how they will be achieved


Question:
Prescriptive code
Answer:
sets out a precise requirement, explaining exactly what must be done to meet the code


Question:
Performance code
Answer:
provides an objective but not the specifics of how to achieve it


Question:
Performance-based code provides:
Answer:
more structure by stating an objective and providing an administrative process to follow; shows the
designer how to meet these objectives, how to document the results, and how to work with the code
official to obtain final approval

, Question:
Furniture plans can typically be doubled with which two plans since the exact locations of outlets
can be directly related to the location and orientation of furniture?
Answer:
Power and communications


Question:
To avoid conflicting requirements, duplication, omissions and errors what must the specifications
be checked against?
Answer:
construction documents


Question:
Which of the following would be the correct way to number a fire protection plan in a set of
construction drawings for a high rise office space?
Answer:
5FP4.1


Question:
Which type of specifications used by most design firms, are pre written specifications that cover
nearly all types of products, methods of installation, and other variables that relate to a specific
product or construction activity?
Answer:
guide specifications and Master specifications


Question:
If a project is going to be submitted for LEED Certification, all of the requirements would be listed
in which division?
Answer:
Division 01 General Requirements


Question:
In which CSI Master Format section would you most likely find stainless steel corner guards?