Basic Hand Tools Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
claw hammer Carpenter's tool used to drive and pull
nails.
nail set Tool used to drive nail heads below the
surface.
crosscut saw A saw with small teeth (more teeth per
inch) for cutting across the grain of wood.
rip saw A saw with larger teeth (fewer teeth per
inch) for cutting with the grain of wood.
coping saw Hand saw with short thin blade held by a
bow-shaped frame used to cut irregular
shapes in wood.
back saw A saw with very fine teeth and is often
used in a miter box for cutting angles. The
thin blade is reinforced with a ridge of
thicker metal along the back of the saw. It
cannot cut deeper than the ridge.
key hole saw Short hand saw with a tapered blade
used to cut curves or irregular shapes.
, hack saw A saw used for cutting metal.
sawhorse A frame with legs, used to support pieces
of wood being sawed.
wood turning tools A set of tools used to cut wood on a
wood lathe.
bar clamp A wood worker's tool used to glue boards
together. Is made up of a long metal bar
with a clamp jaw at each end.
wood clamp A double screw clamp with wooden jaws.
Useful in furniture construction and repair.
quick clamp These clamps have a ratchet mechansim
that quickly slides into place. You squeeze
the trigger to hold fast and squeeze again
to release the grip.
scraper A tool used for removing material from a
surface.
steel file A steel hand tool with small sharp teeth
used for sharpening or shaping.
scratch awl A sharp-pointed tool for marking wood
or metal.
utility knife An all purpose knife used for cutting.
Answers with Verified Solutions | Latest
Updated 2026
claw hammer Carpenter's tool used to drive and pull
nails.
nail set Tool used to drive nail heads below the
surface.
crosscut saw A saw with small teeth (more teeth per
inch) for cutting across the grain of wood.
rip saw A saw with larger teeth (fewer teeth per
inch) for cutting with the grain of wood.
coping saw Hand saw with short thin blade held by a
bow-shaped frame used to cut irregular
shapes in wood.
back saw A saw with very fine teeth and is often
used in a miter box for cutting angles. The
thin blade is reinforced with a ridge of
thicker metal along the back of the saw. It
cannot cut deeper than the ridge.
key hole saw Short hand saw with a tapered blade
used to cut curves or irregular shapes.
, hack saw A saw used for cutting metal.
sawhorse A frame with legs, used to support pieces
of wood being sawed.
wood turning tools A set of tools used to cut wood on a
wood lathe.
bar clamp A wood worker's tool used to glue boards
together. Is made up of a long metal bar
with a clamp jaw at each end.
wood clamp A double screw clamp with wooden jaws.
Useful in furniture construction and repair.
quick clamp These clamps have a ratchet mechansim
that quickly slides into place. You squeeze
the trigger to hold fast and squeeze again
to release the grip.
scraper A tool used for removing material from a
surface.
steel file A steel hand tool with small sharp teeth
used for sharpening or shaping.
scratch awl A sharp-pointed tool for marking wood
or metal.
utility knife An all purpose knife used for cutting.
