ROBOTICS CHAPTER 3 EXAM
QUESTIONS AND ANSWERS
A(n) ______________________________ conductor should be used with power tools
and electrical equipment. - Correct Answers -Three wire
The ANSI/RIA R15.06-2012: American National Standard for Industrial Robots and
Robot Systems—Safety Requirements document provides safety requirements for
industrial robot ____. - Correct Answers -manufacturing environments
installation sites
general operation
Paint or colored tape may be used on the floor to outline the perimeter of the robot's
work area. - Correct Answers -True
Use ____ procedures when repairing equipment to disable machinery and prevent
hazardous energy releases. - Correct Answers -lockout/tagout
A ____ is a component of an electrical system that can be opened or closed to allow or
interrupt the flow of current. - Correct Answers -Circuit breaker
To ensure that no one else can turn on the power to equipment while it is being
serviced, use ______________________________ procedures. - Correct Answers -
Lockout/Tagout
When ______________________________ move from their original position, indicating
excessive stress, power is removed from the machine. - Correct Answers -Detents
The ______________________________ is an agency of the US federal government
that sets and enforces standards related to worker safety. - Correct Answers -OSHA
When a circuit breaker is ______________________________, the electrical current
flows uninterrupted along the channel. - Correct Answers -Closed
A(n) ____ is a safety device designed to prevent unauthorized access to hazardous
areas by requiring a key for entry. - Correct Answers -interlock
Overload protection can be provided by ____, which are pins or tubes that break or
buckle under extreme stress. - Correct Answers -Dentents
QUESTIONS AND ANSWERS
A(n) ______________________________ conductor should be used with power tools
and electrical equipment. - Correct Answers -Three wire
The ANSI/RIA R15.06-2012: American National Standard for Industrial Robots and
Robot Systems—Safety Requirements document provides safety requirements for
industrial robot ____. - Correct Answers -manufacturing environments
installation sites
general operation
Paint or colored tape may be used on the floor to outline the perimeter of the robot's
work area. - Correct Answers -True
Use ____ procedures when repairing equipment to disable machinery and prevent
hazardous energy releases. - Correct Answers -lockout/tagout
A ____ is a component of an electrical system that can be opened or closed to allow or
interrupt the flow of current. - Correct Answers -Circuit breaker
To ensure that no one else can turn on the power to equipment while it is being
serviced, use ______________________________ procedures. - Correct Answers -
Lockout/Tagout
When ______________________________ move from their original position, indicating
excessive stress, power is removed from the machine. - Correct Answers -Detents
The ______________________________ is an agency of the US federal government
that sets and enforces standards related to worker safety. - Correct Answers -OSHA
When a circuit breaker is ______________________________, the electrical current
flows uninterrupted along the channel. - Correct Answers -Closed
A(n) ____ is a safety device designed to prevent unauthorized access to hazardous
areas by requiring a key for entry. - Correct Answers -interlock
Overload protection can be provided by ____, which are pins or tubes that break or
buckle under extreme stress. - Correct Answers -Dentents
