California CSLB C10 Electrical
EXAM|Questions and Correct Answers
100%| Updated
https://www.stuvia.com/user/thinktrek
+1(305) 565-6365
, Min #receptacles in a garage - Answer 1
Mobile home service equipment shall be line of sight and no more than ____ from the exterior
wall of the home - Answer 30'
If a service conductor is over 300V but less than 600V, what is the minimum clearance of that
service conductor if it runs in residential and commercial areas that are not subject to traffic? -
Answer 15'
A power meter must be a minimum of ____ feet away from any door, gas meter, or window
opening. - Answer 3
A rod-type grounding electrode should have a minimum diameter of - Answer 5/8"
Conductors entering buildings shall be protected: - Answer To the point of entrance
A grounding electrode must be in contact with soil a minimum: - Answer 8'
If a raceway has various conductors coming from different systems, then you should group each
system separately every: - Answer 6'
What is the maximum distance a service conductor can run over a roof? - Answer 6'
Soldered connections are not permitted for - Answer Grounded connections
Refer to diagram. If you have 0 to 150 nominal voltage to ground, then what is the minimum
clear distance required from such equipment? - Answer 3'
EXAM|Questions and Correct Answers
100%| Updated
https://www.stuvia.com/user/thinktrek
+1(305) 565-6365
, Min #receptacles in a garage - Answer 1
Mobile home service equipment shall be line of sight and no more than ____ from the exterior
wall of the home - Answer 30'
If a service conductor is over 300V but less than 600V, what is the minimum clearance of that
service conductor if it runs in residential and commercial areas that are not subject to traffic? -
Answer 15'
A power meter must be a minimum of ____ feet away from any door, gas meter, or window
opening. - Answer 3
A rod-type grounding electrode should have a minimum diameter of - Answer 5/8"
Conductors entering buildings shall be protected: - Answer To the point of entrance
A grounding electrode must be in contact with soil a minimum: - Answer 8'
If a raceway has various conductors coming from different systems, then you should group each
system separately every: - Answer 6'
What is the maximum distance a service conductor can run over a roof? - Answer 6'
Soldered connections are not permitted for - Answer Grounded connections
Refer to diagram. If you have 0 to 150 nominal voltage to ground, then what is the minimum
clear distance required from such equipment? - Answer 3'
