AETC SWE Exam with all Correct & 100% Verified Answers |
Actual Complete Exam |Already Graded A+ (Just Released)
What is the electrolyte solution composed of in a NICAD battery? ✔Correct Answer-30%
Potassium Hydroxide
70% Distilled Water
AET2 Prac Guide-shop maint
In a NICAD battery what are the plates composed of? ✔Correct Answer-Specially
manufactured porous nickel plates
AET2 Prac Guide-shop maint
What can be used to neutralize large spills of battery electrolyte? ✔Correct Answer-most
common is a vinegar/ water solution- 1qt/1 gal or
5% boric acid solution or
citrus
AET2 Prac guide- shop maint
The ACCB forwards a recommendation on all standard aircraft configuration changes for final
review to whom? ✔Correct Answer-Commandant CG-711 Chief, Office of Aviation Forces and
Commandant CG-41 Chief, Office of Aeronautical Engineering
PG-85-00-70
ACCB review is not required when? ✔Correct Answer-A TCTO/SCTO is for inspection purposes
only or
A TCTO/SCTO is a revision to an existing approved TCTO/SCTO and no major changes have been
made.
PG-85-00-70
What is the process guide for the Aircraft Configuration Control Board ( ACCB) ? ✔Correct
Answer-CGTO PG-85-00-70
No aircraft modifications will be made without specific authorization from whom? ✔Correct
Answer-Commandant CG-711
PG-85-00-70
Who will provide policy guidance for the corrosion prevention and control program?
✔Correct Answer-Commandant CG 41
PG-85-00-60
A message TCTO released after working hours without a number assigned by ALC ESD TPB
would look like what? ✔Correct Answer-HH-60 T25XXX
,TPB will be notified the next business day that the message was sent. The TPB tech writer will
assign a number and advise the ACMS maintenace analyst.
PG-85-00-40
What is the breakdown of a TCTO number? ✔Correct Answer-T34101
Always a T ACMS code for TCTO
34 is the ATA chapter or S1000D chapter
the rest is the sequential TO number within ATA-100 category or S1000D category
PG-85-00-40
What Mode 3 code are USCG aircraft authorized to squak during SAR operations? ✔Correct
Answer-Code 1277
3710.1f
Quality Assurance inspectors shall be selected and designated in writng by whom? ✔Correct
Answer-Engineering Officer
PG-85-00-110 1-1
Who may authorize a collateral duty QA inspector to sign off grounding discrepancies and flight
control work? ✔Correct Answer-Can be approved by any supervisor possessing maintenance
release authority
PG-85-00-110 1-1
Who provides funds directly to DOD for USCG participation in the JOAP program? ✔Correct
Answer-CG-41
PG-85-00-110 1-3
What does SOAP stand for? ✔Correct Answer-Spectrometric Oil Analysis Program
PG-85-00-110 1-3
What T.O. is the primary directive for USCG involvement in the JOAP program? ✔Correct
Answer-NAVAIR 17-15-50.1
PG 85-00-110 1-3
What does RCM stand for? What does it do? What is the PG number? ✔Correct Answer-
Reliability Centered Maintenance
Monitors the performance of equipment and brings attention to management of deteriorating
trends. PG-85-00-30
PG-85-00-110 1-4
What is a CAMI? ✔Correct Answer-Continuing Action Maintenance Instruction
used when a directive or situation dictates specific work must be performed at recurring
intervals or upon occurence of a particular condition or incident.
PG-85-00-110 1-8
, What is a TIMI? ✔Correct Answer-Technical Information Maintenance Instruction
directive or situation requires that technical info be promulgated within an activity.
PG-85-00-110 1-8
What is a SAMI? ✔Correct Answer-Single Action Maintenance Instruction
used when a directive or situation dictates that specific work must be performed on a one time
basis.
PG-85-00-110 1-8
What is required for each new or modified airborne COMSEC installation? ✔Correct Answer-
TEMPEST Certification
This includes initial installation, reinstallation after modification or after modification of
associated wiring.
PG-85-00-110 1-7
What is the USCG TEMPEST program? Who will oversee it? ✔Correct Answer-The
investigation and study of compromising emanations.
CG-41
PG-85-00-110 1-6
Who is responsible for ensuring an effective calibration program is implemented for assigned
equipment and tooling? How is it tracked? ✔Correct Answer-the CO
ACMS Special Requirements or calibration facility tracking list
PG-85-00-110 1-6
What is the normal level of Fuel System Icing Inhibitor in turbine fuel? What is the Mil Spec #?
✔Correct Answer-0.10-0.15% by volume
MIL-DTL-85470B
this additive will lower the flash point of JP-4 by 4degrees and inhibit growth of bacteria
PG-85-00-110 1-5
When a maintenance instruction is canceled how long will it be filed? ✔Correct Answer-6
months
PG-85-00-110 1-8
What manual addresses the aviation tool control program and provides guidance for the
purchase of tools from commercial sources? ✔Correct Answer-COMDTINST M4400.19
Supply Policies and Procedures Manual
PG-85-00-110 1-9
Aviation tools will be of such quality that they meet or exceed what standard? ✔Correct
Answer-(SAE) Society of Automotive Engineers
Aerospace Standards (AS-954, AS-4167)
Actual Complete Exam |Already Graded A+ (Just Released)
What is the electrolyte solution composed of in a NICAD battery? ✔Correct Answer-30%
Potassium Hydroxide
70% Distilled Water
AET2 Prac Guide-shop maint
In a NICAD battery what are the plates composed of? ✔Correct Answer-Specially
manufactured porous nickel plates
AET2 Prac Guide-shop maint
What can be used to neutralize large spills of battery electrolyte? ✔Correct Answer-most
common is a vinegar/ water solution- 1qt/1 gal or
5% boric acid solution or
citrus
AET2 Prac guide- shop maint
The ACCB forwards a recommendation on all standard aircraft configuration changes for final
review to whom? ✔Correct Answer-Commandant CG-711 Chief, Office of Aviation Forces and
Commandant CG-41 Chief, Office of Aeronautical Engineering
PG-85-00-70
ACCB review is not required when? ✔Correct Answer-A TCTO/SCTO is for inspection purposes
only or
A TCTO/SCTO is a revision to an existing approved TCTO/SCTO and no major changes have been
made.
PG-85-00-70
What is the process guide for the Aircraft Configuration Control Board ( ACCB) ? ✔Correct
Answer-CGTO PG-85-00-70
No aircraft modifications will be made without specific authorization from whom? ✔Correct
Answer-Commandant CG-711
PG-85-00-70
Who will provide policy guidance for the corrosion prevention and control program?
✔Correct Answer-Commandant CG 41
PG-85-00-60
A message TCTO released after working hours without a number assigned by ALC ESD TPB
would look like what? ✔Correct Answer-HH-60 T25XXX
,TPB will be notified the next business day that the message was sent. The TPB tech writer will
assign a number and advise the ACMS maintenace analyst.
PG-85-00-40
What is the breakdown of a TCTO number? ✔Correct Answer-T34101
Always a T ACMS code for TCTO
34 is the ATA chapter or S1000D chapter
the rest is the sequential TO number within ATA-100 category or S1000D category
PG-85-00-40
What Mode 3 code are USCG aircraft authorized to squak during SAR operations? ✔Correct
Answer-Code 1277
3710.1f
Quality Assurance inspectors shall be selected and designated in writng by whom? ✔Correct
Answer-Engineering Officer
PG-85-00-110 1-1
Who may authorize a collateral duty QA inspector to sign off grounding discrepancies and flight
control work? ✔Correct Answer-Can be approved by any supervisor possessing maintenance
release authority
PG-85-00-110 1-1
Who provides funds directly to DOD for USCG participation in the JOAP program? ✔Correct
Answer-CG-41
PG-85-00-110 1-3
What does SOAP stand for? ✔Correct Answer-Spectrometric Oil Analysis Program
PG-85-00-110 1-3
What T.O. is the primary directive for USCG involvement in the JOAP program? ✔Correct
Answer-NAVAIR 17-15-50.1
PG 85-00-110 1-3
What does RCM stand for? What does it do? What is the PG number? ✔Correct Answer-
Reliability Centered Maintenance
Monitors the performance of equipment and brings attention to management of deteriorating
trends. PG-85-00-30
PG-85-00-110 1-4
What is a CAMI? ✔Correct Answer-Continuing Action Maintenance Instruction
used when a directive or situation dictates specific work must be performed at recurring
intervals or upon occurence of a particular condition or incident.
PG-85-00-110 1-8
, What is a TIMI? ✔Correct Answer-Technical Information Maintenance Instruction
directive or situation requires that technical info be promulgated within an activity.
PG-85-00-110 1-8
What is a SAMI? ✔Correct Answer-Single Action Maintenance Instruction
used when a directive or situation dictates that specific work must be performed on a one time
basis.
PG-85-00-110 1-8
What is required for each new or modified airborne COMSEC installation? ✔Correct Answer-
TEMPEST Certification
This includes initial installation, reinstallation after modification or after modification of
associated wiring.
PG-85-00-110 1-7
What is the USCG TEMPEST program? Who will oversee it? ✔Correct Answer-The
investigation and study of compromising emanations.
CG-41
PG-85-00-110 1-6
Who is responsible for ensuring an effective calibration program is implemented for assigned
equipment and tooling? How is it tracked? ✔Correct Answer-the CO
ACMS Special Requirements or calibration facility tracking list
PG-85-00-110 1-6
What is the normal level of Fuel System Icing Inhibitor in turbine fuel? What is the Mil Spec #?
✔Correct Answer-0.10-0.15% by volume
MIL-DTL-85470B
this additive will lower the flash point of JP-4 by 4degrees and inhibit growth of bacteria
PG-85-00-110 1-5
When a maintenance instruction is canceled how long will it be filed? ✔Correct Answer-6
months
PG-85-00-110 1-8
What manual addresses the aviation tool control program and provides guidance for the
purchase of tools from commercial sources? ✔Correct Answer-COMDTINST M4400.19
Supply Policies and Procedures Manual
PG-85-00-110 1-9
Aviation tools will be of such quality that they meet or exceed what standard? ✔Correct
Answer-(SAE) Society of Automotive Engineers
Aerospace Standards (AS-954, AS-4167)
