AVIT 415 Block 2 Exam Questions and Answers with Verified Solutions | Latest Updated 2026

AVIT 415 Block 2 Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026



What are the three different 1). Radial
types of instrument
crosschecks? - 80-90% looking at the AI

- 10-20% looking at surrounding
instruments 2). Rectangular-Gives
each instrument equal scan
time-Takes the most and is least
efficient 3). Inverted V-AI to TC, AI to
VSI


What are the three 1). Fixation-Focusing only on one
crosschecking errors? instrument 2). Omission-Neglecting
one or more instruments-Most
common in the Inverted V check 3).
Emphasis-Over-reliance on one
instrument-Most common during the
radial scan


Control Performance Easy to learn Specific to aircraft


What is the control Attitude + Power = Performance
performance formula?


What are the four steps for 1). Establish 2). Trim 3). Cross-check
control performance? 4). Adjust

, Primary Supporting Harder to learn Transferrable to any
aircraft


What are the pitch AI, ALT, ASI, VSI
instruments for primary
supporting?


What are the bank AI, HI, Compass, TC
instruments for primary
supporting?


What are the power ASI, RPM, MP
instruments for primary
supporting?


For leveling off, begin leveling 10%
off a a ___% VSI prior to target
altitude


For a standard rate turn, take 15%
___% of your TAS


Leveling from turns to
headings, rollout ___ of your
bank angle


What is the nose high unusual Increase power Lower nose Level
attitude recovery procedure? wings


What is the nose low unusual Reduce power Level wings Raise
attitude recovery procedure? nose