AMPP CIP Level 2 standards Exam
Questions and Answers with Verified
Solutions | Latest Updated 2026
- Below 5,000 psig-Also called Low-Pressure Water Cleaning (LP
"power washing" or "pressure WC)
washing"
- 5,000 to 10,000 psig High-Pressure Water Cleaning (HP
WC)
- 10,000 to 30,000 psig High-Pressure Waterjetting (HP WJ)
- 30,000 psig and above Ultrahigh-Pressure Waterjetting
(UHP WJ)
Not easily removed by lightly Light (L) flash rusted surface:
wiping with a cloth
Leaves light marks on a cloth Moderate (M) flash rusted surface:
that is lightly wiped over the
surface
Leaves significant marks on a Heavy (H) flash rusted surface:
cloth that is lightly wiped over
the surface
No. 6 Operators and others in the area of
thermal spraying should wear No. __
green welding goggles.
, Inspection of linings on steel SP0288
and concrete
Design, fabrication, and SP0178
surface finish practices for
tanks and vessels to be lined
for immersion service.
Rapid Rise Fire Tests of U.L. 1709
Protection Materials for
Structural Steel
NACE No. 1/SSPC-SP 5 with a Surface preparation for rubber
surface profile of 1.5 to 2.5 should be cleaned to a __________.
mils
Standard practice for surface ASTM D 4258
cleaning concrete for coating
Standard practice for abrading ASTM D 4259
concrete
Standard practice for acid ASTM D 4260
etching
Standard test method for ASTM D 4263
indicating moisture in concrete
by the plastic sheet method
Joint surface preparation NACE No. 6 / SSPC-SP 13
standard for surface
preparation of concrete
Questions and Answers with Verified
Solutions | Latest Updated 2026
- Below 5,000 psig-Also called Low-Pressure Water Cleaning (LP
"power washing" or "pressure WC)
washing"
- 5,000 to 10,000 psig High-Pressure Water Cleaning (HP
WC)
- 10,000 to 30,000 psig High-Pressure Waterjetting (HP WJ)
- 30,000 psig and above Ultrahigh-Pressure Waterjetting
(UHP WJ)
Not easily removed by lightly Light (L) flash rusted surface:
wiping with a cloth
Leaves light marks on a cloth Moderate (M) flash rusted surface:
that is lightly wiped over the
surface
Leaves significant marks on a Heavy (H) flash rusted surface:
cloth that is lightly wiped over
the surface
No. 6 Operators and others in the area of
thermal spraying should wear No. __
green welding goggles.
, Inspection of linings on steel SP0288
and concrete
Design, fabrication, and SP0178
surface finish practices for
tanks and vessels to be lined
for immersion service.
Rapid Rise Fire Tests of U.L. 1709
Protection Materials for
Structural Steel
NACE No. 1/SSPC-SP 5 with a Surface preparation for rubber
surface profile of 1.5 to 2.5 should be cleaned to a __________.
mils
Standard practice for surface ASTM D 4258
cleaning concrete for coating
Standard practice for abrading ASTM D 4259
concrete
Standard practice for acid ASTM D 4260
etching
Standard test method for ASTM D 4263
indicating moisture in concrete
by the plastic sheet method
Joint surface preparation NACE No. 6 / SSPC-SP 13
standard for surface
preparation of concrete
