EXAM PREP STUDY GUIDE 2026
This study material provides a comprehensive bank of
verified multiple-choice questions, answers, and detailed
rationales tailored for the Florida LP Gas Master Qualifier
Exam. It covers critical safety regulations, physical
properties of propane, commercial dispensing unit rules, and
compliance with NFPA 54 and NFPA 58 codes. Perfect for
students and professionals seeking a high pass success
rate, this guide simplifies complex state laws and chemical
principles for rapid mastery.
1. Which state agency is responsible for regulating the sale,
inspection, and safety compliance of LP gas in Florida?
A. Department of Environmental Protection (DEP)
B. Bureau of Liquefied Petroleum Gas Inspection (Department of
Agriculture and Consumer Services)
C. Florida Public Service Commission (PSC)
D. Department of Transportation (DOT)
Answer: B
Rationale: The Bureau of Liquefied Petroleum Gas
Inspection, operating under the Florida Department of
Agriculture and Consumer Services (FDACS), holds the
,official statutory authority to enforce LP gas laws, conduct
field audits, and issue qualifiers' credentials in the state.
2. At what exact temperature does liquid propane boil under
normal atmospheric pressure (14.7 psi)?
A. 32°F
B. 0°F
C. -44°F
D. -156°F
Answer: C
Rationale: Propane has a boiling point of -44°F (or -42°C). At
any temperature above this threshold at atmospheric
pressure, liquid propane will rapidly boil and change into its
vapor state.
3. What is the standard weight of one single United States
gallon of liquid propane at 60°F?
A. 4.20 pounds
B. 5.00 pounds
C. 8.33 pounds
D. 1.50 pounds
Answer: A
Rationale: For industry calculations, billing, and filling limits,
one gallon of liquid propane is standardized at 4.20 pounds.
4. What is the liquid expansion ratio of propane when it
transitions from a liquid state to a vapor state at atmospheric
pressure?
A. 1:1.50
B. 1:100
C. 1:270
,D. 1:440
Answer: C
Rationale: Liquid propane expands 270 times its volume
when vaporizing. This massive expansion ratio highlights
why even tiny liquid leaks represent extreme fire and
pressure hazards.
5. Compared to normal ambient air, what is the specific
gravity of propane vapor?
A. 0.50
B. 1.00
C. 1.50
D. 2.15
Answer: C
Rationale: Propane vapor has a specific gravity of
approximately 1.50, meaning it is one and a half times
heavier than air. Consequently, leaking propane vapor will
settle in low-lying areas, such as ditches, basements, and
drains.
6. What is the approximate specific gravity of liquid propane
compared to water?
A. 0.50
B. 1.00
C. 1.50
D. 2.70
Answer: A
Rationale: Liquid propane has a specific gravity of about 0.50
relative to water, meaning it weighs half as much as water
and will float on top of it.
, 7. What is the flammable (explosive) range of propane gas
mixed with air by volume percentage?
A. 1.0% to 5.0%
B. 2.15% to 9.60%
C. 4.0% to 15.0%
D. 9.6% to 22.0%
Answer: B
Rationale: Propane is only flammable within a narrow
window of 2.15% to 9.60% gas-to-air concentration. Anything
below 2.15% is too lean to ignite, and anything above 9.60%
is too rich due to a lack of oxygen.
8. What chemical compound is legally mandated as an
odorant in LP gas to ensure leak detection?
A. Methane thiol
B. Ethyl mercaptan
C. Benzene dioxide
D. Propane glycol
Answer: B
Rationale: Because natural propane is completely odorless
and colorless, federal and state laws require the addition of
ethyl mercaptan, which provides a distinct "rotten egg" smell
for rapid leak detection.
9. Under Florida law, what specific incident parameters
trigger a mandatory immediate accident report to the Bureau
of LP Gas?
A. Any leak resulting in an service interruption
B. Incidents involving bodily injury requiring professional medical
treatment or property damage exceeding $1,000