Millwright Level 1 Millwright Hand Tools
(15102-06) Exam Question With Correct
Answers
Chain Wrench - CORRECT ANSWER✔✔-Type of pipe wrench that com in
| | | | | | | | | | |
various sizes to handle pipe up to 18 inches in diameter.
| | | | | | | | | |
Strap Wrench - CORRECT ANSWER✔✔-Type of pipe wrench that are
| | | | | | | | | |
often used on pipe or round material that is too hard for pipe or chain
| | | | | | | | | | | | | | |
wrenches to grip and on finished surfaces that pipe wrenches or chain
| | | | | | | | | | | |
wrenches would mar. | |
Spanner Wrenches - CORRECT ANSWER✔✔-Made for specific purpose,
| | | | | | | |
they are usually either furnished with the tool or equipment that they
| | | | | | | | | | | |
are used on or are offered as service items.
| | | | | | | |
Taper Gauges - CORRECT ANSWER✔✔-A taper gauge consists of a solid
| | | | | | | | | | |
shaft-shaped bar with a tapered section that is used to measure the
| | | | | | | | | | | |
inside diameters of tapered holes. They are also used on steam and gas
| | | | | | | | | | | | |
turbines to take wheel readings. Taper gauges are precision instruments
| | | | | | | | | |
and are very fragile. When not in used, the gauge should be wrapped in
| | | | | | | | | | | | | |
an oily cloth to prevent rust and stored in a place where other tools and
| | | | | | | | | | | | | | |
, materials will not be thrown or dropped on it. Once a gauge is damaged,
| | | | | | | | | | | | |
it is of not further use.
| | | | | |
Pipe Cutters - CORRECT ANSWER✔✔-Pipe cutters are used to cut steel,
| | | | | | | | | | |
brass, copper, and iron pipe. There are various sizes of pipe cutters for
| | | | | | | | | | | | |
different size pipe. | |
Tubing Cutters - CORRECT ANSWER✔✔-Tubing cutters closely resemble
| | | | | | | |
pipe cutters and are used in the same way. Tubing cutters are used to
| | | | | | | | | | | | | |
cut thin-wall iron, brass, steel, copper, and aluminum tubing. There are
| | | | | | | | | | |
various sizes of tubbing cutters for different size tubing.
| | | | | | | |
Honing Stones - CORRECT ANSWER✔✔-Honing stones are used for a
| | | | | | | | | |
variety of purposes, including surface conditioning and tool sharpening.
| | | | | | | | |
Honing stones belong to one of two groups: natural and artificial. They
| | | | | | | | | | | |
are made in various grains: coarse, medium, fine, and very fine, and
| | | | | | | | | | | |
various shapes: square, triangular, rectangular, round, mounted
| | | | | | |
rectangular, and round edge slip. Honing stones are fragile and must be
| | | | | | | | | | | |
kept in a box or special racks to protect them from breakage.
| | | | | | | | | | |
Artificial Honing Stones - CORRECT ANSWER✔✔-Usually made of
| | | | | | | |
silicone, aluminum oxide, or carbide. | | | |
Natural Honing Stones - CORRECT ANSWER✔✔-Some natural stones are
| | | | | | | |
treated with oil during manufacture and are often called oilstones. They
| | | | | | | | | | |
(15102-06) Exam Question With Correct
Answers
Chain Wrench - CORRECT ANSWER✔✔-Type of pipe wrench that com in
| | | | | | | | | | |
various sizes to handle pipe up to 18 inches in diameter.
| | | | | | | | | |
Strap Wrench - CORRECT ANSWER✔✔-Type of pipe wrench that are
| | | | | | | | | |
often used on pipe or round material that is too hard for pipe or chain
| | | | | | | | | | | | | | |
wrenches to grip and on finished surfaces that pipe wrenches or chain
| | | | | | | | | | | |
wrenches would mar. | |
Spanner Wrenches - CORRECT ANSWER✔✔-Made for specific purpose,
| | | | | | | |
they are usually either furnished with the tool or equipment that they
| | | | | | | | | | | |
are used on or are offered as service items.
| | | | | | | |
Taper Gauges - CORRECT ANSWER✔✔-A taper gauge consists of a solid
| | | | | | | | | | |
shaft-shaped bar with a tapered section that is used to measure the
| | | | | | | | | | | |
inside diameters of tapered holes. They are also used on steam and gas
| | | | | | | | | | | | |
turbines to take wheel readings. Taper gauges are precision instruments
| | | | | | | | | |
and are very fragile. When not in used, the gauge should be wrapped in
| | | | | | | | | | | | | |
an oily cloth to prevent rust and stored in a place where other tools and
| | | | | | | | | | | | | | |
, materials will not be thrown or dropped on it. Once a gauge is damaged,
| | | | | | | | | | | | |
it is of not further use.
| | | | | |
Pipe Cutters - CORRECT ANSWER✔✔-Pipe cutters are used to cut steel,
| | | | | | | | | | |
brass, copper, and iron pipe. There are various sizes of pipe cutters for
| | | | | | | | | | | | |
different size pipe. | |
Tubing Cutters - CORRECT ANSWER✔✔-Tubing cutters closely resemble
| | | | | | | |
pipe cutters and are used in the same way. Tubing cutters are used to
| | | | | | | | | | | | | |
cut thin-wall iron, brass, steel, copper, and aluminum tubing. There are
| | | | | | | | | | |
various sizes of tubbing cutters for different size tubing.
| | | | | | | |
Honing Stones - CORRECT ANSWER✔✔-Honing stones are used for a
| | | | | | | | | |
variety of purposes, including surface conditioning and tool sharpening.
| | | | | | | | |
Honing stones belong to one of two groups: natural and artificial. They
| | | | | | | | | | | |
are made in various grains: coarse, medium, fine, and very fine, and
| | | | | | | | | | | |
various shapes: square, triangular, rectangular, round, mounted
| | | | | | |
rectangular, and round edge slip. Honing stones are fragile and must be
| | | | | | | | | | | |
kept in a box or special racks to protect them from breakage.
| | | | | | | | | | |
Artificial Honing Stones - CORRECT ANSWER✔✔-Usually made of
| | | | | | | |
silicone, aluminum oxide, or carbide. | | | |
Natural Honing Stones - CORRECT ANSWER✔✔-Some natural stones are
| | | | | | | |
treated with oil during manufacture and are often called oilstones. They
| | | | | | | | | | |
