1|Page
CSIA Certification Exam || Most Recent Exam
Actual Complete Real Verified Exam Questions
And Correct Answers (Verified Answers by
Expert) Already Graded A+ | Guaranteed
Success!! Newest Exam!!!
What does readily accessible areas mean in the
chimney inspection process?
A) areas that can be reached for inspection or
maintenance without the use of tools or ladders.
B) areas that are assessable when panels are
removed
C) areas that can easily be opened, removed, or
destroyed for inspection purposes
D) inspections that can easily be performed using
roof access and safety gear - Answer-A) areas that
can be reached for inspection or maintenance
without the use of tools or ladders
Buckled interior baffles on a woodstove can:
A) admit access air
,2|Page
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions - Answer-C) inhibit the flow of
gasses out of the stove
What level of inspection required every time you
sweep a chimney?
A) level I
B) level II
C) level III
D) level IV - Answer-A) Level I
The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737 - Answer-B) UL 1482
The standard for factory built chimneys is:
,3|Page
A) UL 103
B) UL 127
C) UL 441
D) UL 641 - Answer-A) UL 103
The combustion process is referred to as the:
A) fire triangle
B) fire pyramid
C) square fire theory
D) fire tetrahedron - Answer-D) fire tetrahedron
Which of the following is a factor leading to greater
creosote accumulation?
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads - Answer-A) higher smoke
density
, 4|Page
At a minimum how much higher does a chimney
need to me than any point within 10 feet of the
chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches - Answer-B) 24 inches
OSHA requires that a ladder extend ____ inches
above the point of contact with the roof.
A) 12
B) 24
C) 36
D) 48 - Answer-C) 36
The three types of heat transfer are:
A) conduction, latent and radiation
B) radiation, convection, and sensible
C) sensible, radiant, and thermal
CSIA Certification Exam || Most Recent Exam
Actual Complete Real Verified Exam Questions
And Correct Answers (Verified Answers by
Expert) Already Graded A+ | Guaranteed
Success!! Newest Exam!!!
What does readily accessible areas mean in the
chimney inspection process?
A) areas that can be reached for inspection or
maintenance without the use of tools or ladders.
B) areas that are assessable when panels are
removed
C) areas that can easily be opened, removed, or
destroyed for inspection purposes
D) inspections that can easily be performed using
roof access and safety gear - Answer-A) areas that
can be reached for inspection or maintenance
without the use of tools or ladders
Buckled interior baffles on a woodstove can:
A) admit access air
,2|Page
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions - Answer-C) inhibit the flow of
gasses out of the stove
What level of inspection required every time you
sweep a chimney?
A) level I
B) level II
C) level III
D) level IV - Answer-A) Level I
The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737 - Answer-B) UL 1482
The standard for factory built chimneys is:
,3|Page
A) UL 103
B) UL 127
C) UL 441
D) UL 641 - Answer-A) UL 103
The combustion process is referred to as the:
A) fire triangle
B) fire pyramid
C) square fire theory
D) fire tetrahedron - Answer-D) fire tetrahedron
Which of the following is a factor leading to greater
creosote accumulation?
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads - Answer-A) higher smoke
density
, 4|Page
At a minimum how much higher does a chimney
need to me than any point within 10 feet of the
chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches - Answer-B) 24 inches
OSHA requires that a ladder extend ____ inches
above the point of contact with the roof.
A) 12
B) 24
C) 36
D) 48 - Answer-C) 36
The three types of heat transfer are:
A) conduction, latent and radiation
B) radiation, convection, and sensible
C) sensible, radiant, and thermal
