QUESTIONS AND CORRECT ANSWER WITH
EXPLANATION GRADED A+ STUDY GUIDE SOUTHERN
NEW HAMPSHIRE UNIVERSITY
1. Laboratory management refers to:
A. Organization and control of laboratory activities
B. Only performing experiments
C. Studying animals
D. Weather forecasting
Answer: A
Rationale: It involves planning, organizing, and supervising lab work.
2. The main goal of laboratory management is to:
A. Ensure efficiency and safety
B. Increase accidents
C. Reduce testing
D. Avoid records
Answer: A
Rationale: Focus is efficiency and safety.
3. A laboratory manager is responsible for:
A. Supervision of lab operations
B. Only conducting experiments
C. Cleaning only
D. No responsibilities
Answer: A
Rationale: Oversees all lab activities.
4. Good laboratory organization improves:
A. Productivity and accuracy
B. Confusion
C. Errors
D. Waste
Answer: A
Rationale: Proper structure enhances performance.
,5. Standard Operating Procedures (SOPs) are used to:
A. Guide consistent lab work
B. Replace equipment
C. Increase errors
D. Remove safety rules
Answer: A
Rationale: SOPs ensure standard methods.
6. SOPs stand for:
A. Standard Operating Procedures
B. Scientific Output Protocols
C. System Output Plans
D. Safety Operation Policies
Answer: A
Rationale: Defined lab procedures.
7. Laboratory safety is primarily the responsibility of:
A. All staff
B. Only manager
C. Only students
D. Only technicians
Answer: A
Rationale: Shared responsibility.
8. Personal Protective Equipment (PPE) includes:
A. Gloves and lab coats
B. Phones
C. Books
D. Chairs
Answer: A
Rationale: Safety equipment.
9. A lab coat protects against:
A. Chemical contamination
B. Noise
C. Light
D. Pressure
Answer: A
Rationale: Barrier protection.
, 10. Gloves are used to protect:
A. Hands from hazards
B. Eyes only
C. Ears
D. Feet
Answer: A
Rationale: Hand safety.
11. Eye wash stations are used in case of:
A. Chemical exposure to eyes
B. Noise exposure
C. Heat exposure only
D. Cold exposure
Answer: A
Rationale: Emergency flushing.
12. Fire extinguishers are used for:
A. Fire emergencies
B. Cleaning floors
C. Cooling samples
D. Measuring pressure
Answer: A
Rationale: Fire safety.
13. Laboratory risk assessment involves:
A. Identifying and controlling hazards
B. Ignoring risks
C. Increasing hazards
D. Removing equipment
Answer: A
Rationale: Safety evaluation.
14. Hazard is defined as:
A. A potential source of harm
B. A safe condition
C. A tool
D. A procedure
Answer: A
Rationale: Danger source.