MP100 FINAL EXAM ACTUAL TEST PAPER
COMPLETE SOLUTIONS LATEST UPDATE
100 PERCENT VERIFIED
⩥ Mult.
Answer: On a patchbay, a ______________ allows us to make multiple
copies of an audio
signal in parallel.
⩥ 1. Half.
2. Full..
Answer: A ______________ normalled row breaks at the input, and a
_____________
normalled row breaks at the output and the input.
⩥ 1. Moving Coil.
2. Ribbon..
Answer: Two types of dynamic microphones are:
⩥ Electro-magnetic.
Answer: Dynamic microphones operate by using _________ induction.
,⩥ Electrostatic.
Answer: Condenser microphones operate by using an
_________________________
principle.
⩥ 1. Impedance Conversion Amplifier (ICA)
2. Amplifies the signal level & lowers impedance.
Answer: What does ICA stand for, and what does it do?
⩥ Pre-attenuation Device.
Answer: What does PAD stand for?
⩥ Max SPL.
Answer: A PAD on a microphone will increase the
___________________ specification.
⩥ 1. Passive.
2. Active.
3. Tube..
Answer: What are the three types of ribbon microphones?
⩥ To power the ICA.
,Answer: An electret condenser microphone has a pre-charged capsule,
but why does it still require power?
⩥ No, because it has its own power.
Answer: Should you send phantom power (from the console) to a tube
condenser mic?
⩥ Pressure Operated.
Answer: Pressure _______________________ is the technical term for
omnidirectional.
⩥ Proximity Effect.
Answer: _______________________________ is an increase in bass
response as a
directional mic is brought closer to the sound source.
⩥ Transient Response.
Answer: _________________________ is a measure of how quickly a
microphone's
diaphragm will react when it is hit by an acoustic waveform.
⩥ Rumble.
Answer: ________________ is 3 to 25 Hz frequencies that are
transmitted
, through a building's structure.
⩥ 1. Cardioid.
2. Supercardioid
3. Hypercardioid.
Answer: What are the three types of unidirectional polar patterns
⩥ Figure 8.
Answer: Another (slang) name for a bidirectional polar pattern is.
⩥ Off-axis.
Answer: What is the term for the point at which a microphone rejects the
most amount of sound?
⩥ On-axis.
Answer: What is the term for the area where the mic picks up the most
amount of sound?
⩥ Matched Pair.
Answer: _____________ is the term for a pair of mics tested by the
manufacturer to
be exactly the same.
COMPLETE SOLUTIONS LATEST UPDATE
100 PERCENT VERIFIED
⩥ Mult.
Answer: On a patchbay, a ______________ allows us to make multiple
copies of an audio
signal in parallel.
⩥ 1. Half.
2. Full..
Answer: A ______________ normalled row breaks at the input, and a
_____________
normalled row breaks at the output and the input.
⩥ 1. Moving Coil.
2. Ribbon..
Answer: Two types of dynamic microphones are:
⩥ Electro-magnetic.
Answer: Dynamic microphones operate by using _________ induction.
,⩥ Electrostatic.
Answer: Condenser microphones operate by using an
_________________________
principle.
⩥ 1. Impedance Conversion Amplifier (ICA)
2. Amplifies the signal level & lowers impedance.
Answer: What does ICA stand for, and what does it do?
⩥ Pre-attenuation Device.
Answer: What does PAD stand for?
⩥ Max SPL.
Answer: A PAD on a microphone will increase the
___________________ specification.
⩥ 1. Passive.
2. Active.
3. Tube..
Answer: What are the three types of ribbon microphones?
⩥ To power the ICA.
,Answer: An electret condenser microphone has a pre-charged capsule,
but why does it still require power?
⩥ No, because it has its own power.
Answer: Should you send phantom power (from the console) to a tube
condenser mic?
⩥ Pressure Operated.
Answer: Pressure _______________________ is the technical term for
omnidirectional.
⩥ Proximity Effect.
Answer: _______________________________ is an increase in bass
response as a
directional mic is brought closer to the sound source.
⩥ Transient Response.
Answer: _________________________ is a measure of how quickly a
microphone's
diaphragm will react when it is hit by an acoustic waveform.
⩥ Rumble.
Answer: ________________ is 3 to 25 Hz frequencies that are
transmitted
, through a building's structure.
⩥ 1. Cardioid.
2. Supercardioid
3. Hypercardioid.
Answer: What are the three types of unidirectional polar patterns
⩥ Figure 8.
Answer: Another (slang) name for a bidirectional polar pattern is.
⩥ Off-axis.
Answer: What is the term for the point at which a microphone rejects the
most amount of sound?
⩥ On-axis.
Answer: What is the term for the area where the mic picks up the most
amount of sound?
⩥ Matched Pair.
Answer: _____________ is the term for a pair of mics tested by the
manufacturer to
be exactly the same.
