MODULE 6 NCCER EXAMINATION TEST
2026 VERIFIED QUESTIONS WITH
SOLUTIONS
◉Identification tags for slings must include the ________________.
Answer: (manufacturer's name or trademark)
◉Chain hoist are able to lift heavy loads by utilizing a ________________.
Answer: (gear system).
◉An alloy steel chain sling must be removed from service if there is
evidence that ____________________. Answer: replacement links have
been used to repair the chain).
◉A type of wire rope that is susceptible to low heat damage is
________________. Answer: (fiber core).
◉Before attempting to lift a load with a chain make sure
________________________. Answer: (the load is properly balanced).
◉Which hitch allow slings to be connected to the same load without
using a spreader beam is a ___________________. Answer: (bridle hitch).
, ◉The emergency hand stop signal used by a riggers must extend
both arms ____________________. Answer: (horizontally with palms
down and quickly move both arms back and forth).
◉A ________________ is the link between the load and the lifting device..
Answer: (shackle)
◉The maximum amount of weight a structure can safely support is
called __________________. Answer: (load control)
◉A ___________________ is used to determine is an sling has been
overloaded.. Answer: (tattle-tail)
◉________________ is when wire rope strands become untwisted.
Answer: (Unstranding)
◉A worker that can identify existing or potential hazards in the the
work area and is authorize to eliminate such hazards is referred to
as a _____________________. Answer: (competent person).
◉_________________ slings are made of high-strength steel wires that
wraps around a core.. Answer: (Wire rope)
2026 VERIFIED QUESTIONS WITH
SOLUTIONS
◉Identification tags for slings must include the ________________.
Answer: (manufacturer's name or trademark)
◉Chain hoist are able to lift heavy loads by utilizing a ________________.
Answer: (gear system).
◉An alloy steel chain sling must be removed from service if there is
evidence that ____________________. Answer: replacement links have
been used to repair the chain).
◉A type of wire rope that is susceptible to low heat damage is
________________. Answer: (fiber core).
◉Before attempting to lift a load with a chain make sure
________________________. Answer: (the load is properly balanced).
◉Which hitch allow slings to be connected to the same load without
using a spreader beam is a ___________________. Answer: (bridle hitch).
, ◉The emergency hand stop signal used by a riggers must extend
both arms ____________________. Answer: (horizontally with palms
down and quickly move both arms back and forth).
◉A ________________ is the link between the load and the lifting device..
Answer: (shackle)
◉The maximum amount of weight a structure can safely support is
called __________________. Answer: (load control)
◉A ___________________ is used to determine is an sling has been
overloaded.. Answer: (tattle-tail)
◉________________ is when wire rope strands become untwisted.
Answer: (Unstranding)
◉A worker that can identify existing or potential hazards in the the
work area and is authorize to eliminate such hazards is referred to
as a _____________________. Answer: (competent person).
◉_________________ slings are made of high-strength steel wires that
wraps around a core.. Answer: (Wire rope)
