CMT 1150 Unit 1 Exam (Weber State University) | Study Guide, Practice
Questions & Exam Review
architectural prints - ANS ✔✔A room finish schedule identifies the materials required in each
room of the building. This kind of schedule would be found in the ____.
elevations - ANS ✔✔The front, side, and back orthographic views used in construction drawings
are called ____.
Uniform Drawing System - ANS ✔✔The standardization of drawing guidelines that consists of
eight interrelated modules is called the ____.
elevation drawings - ANS ✔✔Window schedules generally appear on the ____.
working drawings - ANS ✔✔On large construction projects, a set of ____ is used and divided
into sections according to the types of construction being performed.
sections - ANS ✔✔Views showing the building as if it were cut apart are called ____.
plotter - ANS ✔✔Unlike manually drafted drawings, CADD drawings are generated on a(n) ____.
structural prints - ANS ✔✔The foundation plans, above-grade framing plans, and building
support system can be found on the ____.
floor plan - ANS ✔✔To find the location of walls, doors, stairways, and fireplaces in a residential
building, you would consult the ____.
False - ANS ✔✔A pictorial drawing shows details of the structural framing.
Questions & Exam Review
architectural prints - ANS ✔✔A room finish schedule identifies the materials required in each
room of the building. This kind of schedule would be found in the ____.
elevations - ANS ✔✔The front, side, and back orthographic views used in construction drawings
are called ____.
Uniform Drawing System - ANS ✔✔The standardization of drawing guidelines that consists of
eight interrelated modules is called the ____.
elevation drawings - ANS ✔✔Window schedules generally appear on the ____.
working drawings - ANS ✔✔On large construction projects, a set of ____ is used and divided
into sections according to the types of construction being performed.
sections - ANS ✔✔Views showing the building as if it were cut apart are called ____.
plotter - ANS ✔✔Unlike manually drafted drawings, CADD drawings are generated on a(n) ____.
structural prints - ANS ✔✔The foundation plans, above-grade framing plans, and building
support system can be found on the ____.
floor plan - ANS ✔✔To find the location of walls, doors, stairways, and fireplaces in a residential
building, you would consult the ____.
False - ANS ✔✔A pictorial drawing shows details of the structural framing.
