CSA Standard W47.1-09 - CWB Welding Supervisor EXAM (2025) QUESTION
AND (DETAILED ANSWERS) WITH COMPLETE SOLUTIONS
Study online at https://quizlet.com/_idav5p
1. Does the CSA Standard W47.1 specify the requirements for a company
seeking certification?: Yes, This standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their personnel and welding procedures (Cl 1.1)
2. Who is responsible for the welded products a company produces?: The company
(1.2) The requirements of this standard are based on the principle that a certified company has full responsibility for
the quality of the welded product it produces and this responsibility cannot be transferred to its employed or retained
personnel or to the administrator of this standard.
3. Does this standard approve the products and services of a certified compa-
ny?: (Cl. 1.3) This standard governs the certification of companies. Certification pertains to the capability of the
company with respect to welding. Certification should not be construed as approving any products or services of the
certified company.
4. What requirements are stipulated in CSA Standard W47.1: (Cl. 1.4) This standard
stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
5. What standard or code reference publications are referred to in CSA Stan-
dard W47.1?: (Cl. 2.1, 2.2) This standard refers to the following publications, and where such reference is made,
it shall be to the edition listed below, including all amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality steel/ Structural quality
steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
, CSA Standard W47.1-09 - CWB Welding Supervisor EXAM (2025) QUESTION
AND (DETAILED ANSWERS) WITH COMPLETE SOLUTIONS
Study online at https://quizlet.com/_idav5p
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal
Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and Calibration Laboratories.
6. What is the difference between "class" and "classification"?: (Cl.3) Class - a category
of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or overhead (O) welding positions.
Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW or WT
7. What are the welding personnel classifications specified in CSA standard
W47.1?: (Cl.3) Classification - T, S, FW, ASW, or WT welding personnel as follows:
- "T" refers to a welder's and welding operator's ability to weld from one side without backing and achieve complete
penetration in the root pass, e.g., hollow section, pipe and plate.
- "S" refers to a welder's and welding operator's ability to weld plates and rolled or hollow sections for the full thickness
of material, when welding from both sides with backing, or for welding square groove welds from both sides, without
backgouging, within the thickness limitations of the accepted welding procedure data sheets for the process used.
- "FW" refers to a welder's and welding operator's ability to deposit fillet welds and tack welds.
AND (DETAILED ANSWERS) WITH COMPLETE SOLUTIONS
Study online at https://quizlet.com/_idav5p
1. Does the CSA Standard W47.1 specify the requirements for a company
seeking certification?: Yes, This standard provides the requirements for the certification of companies
engaged in the fusion welding of steel and the qualification of their personnel and welding procedures (Cl 1.1)
2. Who is responsible for the welded products a company produces?: The company
(1.2) The requirements of this standard are based on the principle that a certified company has full responsibility for
the quality of the welded product it produces and this responsibility cannot be transferred to its employed or retained
personnel or to the administrator of this standard.
3. Does this standard approve the products and services of a certified compa-
ny?: (Cl. 1.3) This standard governs the certification of companies. Certification pertains to the capability of the
company with respect to welding. Certification should not be construed as approving any products or services of the
certified company.
4. What requirements are stipulated in CSA Standard W47.1: (Cl. 1.4) This standard
stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
5. What standard or code reference publications are referred to in CSA Stan-
dard W47.1?: (Cl. 2.1, 2.2) This standard refers to the following publications, and where such reference is made,
it shall be to the edition listed below, including all amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality steel/ Structural quality
steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
, CSA Standard W47.1-09 - CWB Welding Supervisor EXAM (2025) QUESTION
AND (DETAILED ANSWERS) WITH COMPLETE SOLUTIONS
Study online at https://quizlet.com/_idav5p
ASTM International (American Society for Testing and Materials)
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal
Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and Calibration Laboratories.
6. What is the difference between "class" and "classification"?: (Cl.3) Class - a category
of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or overhead (O) welding positions.
Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW or WT
7. What are the welding personnel classifications specified in CSA standard
W47.1?: (Cl.3) Classification - T, S, FW, ASW, or WT welding personnel as follows:
- "T" refers to a welder's and welding operator's ability to weld from one side without backing and achieve complete
penetration in the root pass, e.g., hollow section, pipe and plate.
- "S" refers to a welder's and welding operator's ability to weld plates and rolled or hollow sections for the full thickness
of material, when welding from both sides with backing, or for welding square groove welds from both sides, without
backgouging, within the thickness limitations of the accepted welding procedure data sheets for the process used.
- "FW" refers to a welder's and welding operator's ability to deposit fillet welds and tack welds.
