Fdny p-99 c of f Exam fully solved & updated 2026 (latest version verified for
accuracy) | Latest!!
What is a general requirement of the location of the installation of a boiler? - (ANSWER)Adequate
clearance from combustile construction
What temperature must the materials remain under during combustion? - (ANSWER)170 degrees
What is a requirement for the access of the boiler? - (ANSWER)Access for operation and maintenance
must not be hazardous
What is required upon installation to operate a boiler? - (ANSWER)Inspection and test resulting in
equipment use permit from commissioner
How often should a boiler be inspected? - (ANSWER)Once a year
What documentation is required from a certificate holder? - (ANSWER)Owners annual statement
What is required to hydrostatically test upon installation and who should perform these tests? -
(ANSWER)Liquid fuel piping and fuel oil storage tanks by the installing contractor
At what pressure should piping be tested? - (ANSWER)1/2 max working pressure but less than pressure
required for storage tank
At what pressure should oil storage tanks be tested? - (ANSWER)At 1 1/2x max working pressure but
never < 25 psi
How long should hydrostatic pressure be maintained? - (ANSWER)Until all joints and connections are
inspected for leaks and at 30 minutes have passed
, Fdny p-99 c of f Exam fully solved & updated 2026 (latest version verified for
accuracy) | Latest!!
Who is responsible for testing gas distribution piping? - (ANSWER)Installing contractor before closing
and operation
What is described on instruction cards and where are they located? - (ANSWER)Care and operation of oil
burner located near the equipment.
What type of burners require a C of F holder to operate them? - (ANSWER)Any boiler that is not
automatic or requires preheating.
What is the license holder responsible for after repair? - (ANSWER)Inspecting the repairs, and
functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air pollution control code? -
(ANSWER)All burners fire with solid, liquid, or gas. Including rubbish burners/incinerators.
What temperature are the products of combustion upon exit in low temperature equipment? -
(ANSWER)Less than 600 degrees
What temperature are the products of combustion upon exit in medium temperature equipment? -
(ANSWER)6001000
What temperature are the products of combustion upon exit in high temperature equipment? -
(ANSWER)1000+
How much cfm of air be capable of per gallon of oil per hour? - (ANSWER)36 cfm
accuracy) | Latest!!
What is a general requirement of the location of the installation of a boiler? - (ANSWER)Adequate
clearance from combustile construction
What temperature must the materials remain under during combustion? - (ANSWER)170 degrees
What is a requirement for the access of the boiler? - (ANSWER)Access for operation and maintenance
must not be hazardous
What is required upon installation to operate a boiler? - (ANSWER)Inspection and test resulting in
equipment use permit from commissioner
How often should a boiler be inspected? - (ANSWER)Once a year
What documentation is required from a certificate holder? - (ANSWER)Owners annual statement
What is required to hydrostatically test upon installation and who should perform these tests? -
(ANSWER)Liquid fuel piping and fuel oil storage tanks by the installing contractor
At what pressure should piping be tested? - (ANSWER)1/2 max working pressure but less than pressure
required for storage tank
At what pressure should oil storage tanks be tested? - (ANSWER)At 1 1/2x max working pressure but
never < 25 psi
How long should hydrostatic pressure be maintained? - (ANSWER)Until all joints and connections are
inspected for leaks and at 30 minutes have passed
, Fdny p-99 c of f Exam fully solved & updated 2026 (latest version verified for
accuracy) | Latest!!
Who is responsible for testing gas distribution piping? - (ANSWER)Installing contractor before closing
and operation
What is described on instruction cards and where are they located? - (ANSWER)Care and operation of oil
burner located near the equipment.
What type of burners require a C of F holder to operate them? - (ANSWER)Any boiler that is not
automatic or requires preheating.
What is the license holder responsible for after repair? - (ANSWER)Inspecting the repairs, and
functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air pollution control code? -
(ANSWER)All burners fire with solid, liquid, or gas. Including rubbish burners/incinerators.
What temperature are the products of combustion upon exit in low temperature equipment? -
(ANSWER)Less than 600 degrees
What temperature are the products of combustion upon exit in medium temperature equipment? -
(ANSWER)6001000
What temperature are the products of combustion upon exit in high temperature equipment? -
(ANSWER)1000+
How much cfm of air be capable of per gallon of oil per hour? - (ANSWER)36 cfm
