New Mexico GF8 Transmission Lines Tanks And
Substations Exam UP-TO-DATE EXAM
QUESTIONS AND 100% ACCURATE SOLUTIONS
| Question And VERIFIED ANSWERS - INSTANT
PDF DOWNLOAD.
SECTION 1: NEW MEXICO REGULATIONS & LICENSING
Q1. A contractor in New Mexico plans to build a new substation foundation and
install a 500,000-gallon water storage tank for a power plant. Which GF license
classification is required for this non-electrical infrastructure work?
A) GA – General Building
B) GF-8 – Transmission Lines, Tanks and Substations (Non-Electrical)
C) EL-1 – Electrical Distribution Systems
D) GF-6 – Heavy Equipment Installation
Answer: B
*Explanation: The New Mexico GF-8 classification specifically allows contractors to build,
construct, and place lines, tanks, towers, and pipelines, explicitly excluding electrical
installation work.*
Q2. Under N.M. Admin. Code § 14.6.6.8, which statement best describes the scope
of a contractor holding a GF-8 license?
A) The licensee may perform major electrical work on substations.
B) The licensee may perform non-electrical structural work, including the assembly and
installation of transmission towers, tank foundations, and pipelines.
C) The licensee is restricted to residential construction only.
D) The licensee may replace transformers and switchgear.
Answer: B
*Explanation: GF-8 covers the non-electrical structural components of transmission lines,
tanks, and substations. Electrical work falls under classifications like EE-98 or EL-1.*
,Q3. What is the primary purpose of N.M. Admin. Code § 14.10.5 (Minimum
Standards for Electrical Distribution and Transmission Facilities)?
A) To establish color codes for transmission towers.
B) To set minimum crew size for high-voltage work.
C) To adopt standards for customer-owned electrical facilities.
D) To regulate the price of electricity.
Answer: C
*Explanation: NMAC 14.10.5 establishes that the Construction Industries Division (CID)
sets minimum standards for contracting work on all customer-owned electrical
distribution and transmission facilities.*
Q4. According to the New Mexico Construction Industries Division’s guidelines for
GF-8 applicants, what is the minimum number of years of verifiable, hands-on
experience required for the qualifier on the license?
A) One year
B) Two years
C) Three years
D) Four years
Answer: B
*Explanation: The New Mexico GF-8 classification explicitly requires the qualifying agent
to provide proof of two years of experience in the field.*
Q5. A contractor has a valid GF-8 license but is asked to install the electrical
control wiring for a storage tank’s automated valve. Is the contractor legally
permitted to perform this electrical work?
A) Yes, because GF-8 covers all aspects of tank installation.
B) Yes, if the contractor hires a master electrician as an employee.
C) No, the GF-8 license explicitly excludes electrical installation of transformers,
substation electrical components, and other electrical connections.
D) Yes, if the contractor signs a waiver accepting liability.
Answer: C
*Explanation: The GF-8 classification is strictly for non-electrical work. Electrical hookups
require a separate electrical license, such as EL-1 or EE-98.*
Q6. Under NMAC 14.10.5, who has jurisdiction over customer-owned electrical
distribution and transmission facilities in New Mexico?
A) Local utility only
B) Construction Industries Division (CID)
,C) NM State Police
D) Federal Energy Regulatory Commission (FERC)
Answer: B
Explanation: NMAC 14.10.5.6 establishes that the Construction Industries Division (CID) of
the Regulation and Licensing Department sets minimum standards for this work.
Q7. Under New Mexico contractor licensing rules, what is a potential penalty for a
GF-8 contractor knowingly performing work requiring an electrical license?
A) A written warning for the first offense.
B) Suspension or revocation of the license.
C) A mandatory safety class.
D) No penalty if the work passes inspection.
Answer: B
Explanation: Operating outside the scope of your license (practicing without a license for
that trade) can result in disciplinary action including suspension or revocation.
Q8. The New Mexico Construction Industries Division (CID) is part of which state
department?
A) Department of Transportation
B) Regulation and Licensing Department
C) Department of Health
D) Energy, Minerals and Natural Resources Department
Answer: B
Explanation: The CID operates under the New Mexico Regulation and Licensing
Department.
Q9. Which New Mexico regulation generally adopts the National Electrical Safety
Code (NESC) by reference?
A) NMAC 14.10.5
B) NMAC 14.6.4
C) OSHA 1926
D) API 650
Answer: A
Explanation: NMAC 14.10.5 adopts the NESC as the standard for electrical supply and
distribution facilities.
Q10. A GF-8 contractor is preparing a bid for a new natural gas transmission
pipeline. Under NMAC 14.10.5, which is a required component of the construction
, plan?
A) Aesthetic finish requirements.
B) A clear description of safety and construction standards, including dust control and
erosion mitigation.
C) A marketing brochure for the project.
D) A list of potential subcontractors.
Answer: B
Explanation: The rules require the construction plan to describe safety standards and
mitigation measures such as dust control and stormwater pollution prevention.
Q11. What is the standard frequency of AC power in the United States, relevant to
understanding substation operations?
A) 50 Hz
B) 60 Hz
C) 100 Hz
D) 25 Hz
Answer: B
*Explanation: The standard frequency in the US is 60 Hz, which infrastructure built by
GF-8 contractors supports.*
Q12. A GF-8 contractor is performing a tank foundation pour at a substation site.
Which agency has primary jurisdiction over the quality of the concrete and its
compressive strength testing in New Mexico?
A) The local utility company.
B) The U.S. Department of Energy.
C) The Construction Industries Division (CID).
D) The National Electrical Safety Code (NESC) committee.
Answer: C
Explanation: The CID is the enforcing body for construction standards in New Mexico.
Q13. The New Mexico Electrical Safety Code (NMESC) applies to:
A) Only utility-owned transmission lines.
B) All customer-owned electrical distribution and transmission facilities.
C) Only residential wiring.
D) Only low-voltage systems.
Answer: B
*Explanation: NMAC 14.10.5 specifies that the NMESC applies to all contracting work
performed on customer-owned facilities.*
Substations Exam UP-TO-DATE EXAM
QUESTIONS AND 100% ACCURATE SOLUTIONS
| Question And VERIFIED ANSWERS - INSTANT
PDF DOWNLOAD.
SECTION 1: NEW MEXICO REGULATIONS & LICENSING
Q1. A contractor in New Mexico plans to build a new substation foundation and
install a 500,000-gallon water storage tank for a power plant. Which GF license
classification is required for this non-electrical infrastructure work?
A) GA – General Building
B) GF-8 – Transmission Lines, Tanks and Substations (Non-Electrical)
C) EL-1 – Electrical Distribution Systems
D) GF-6 – Heavy Equipment Installation
Answer: B
*Explanation: The New Mexico GF-8 classification specifically allows contractors to build,
construct, and place lines, tanks, towers, and pipelines, explicitly excluding electrical
installation work.*
Q2. Under N.M. Admin. Code § 14.6.6.8, which statement best describes the scope
of a contractor holding a GF-8 license?
A) The licensee may perform major electrical work on substations.
B) The licensee may perform non-electrical structural work, including the assembly and
installation of transmission towers, tank foundations, and pipelines.
C) The licensee is restricted to residential construction only.
D) The licensee may replace transformers and switchgear.
Answer: B
*Explanation: GF-8 covers the non-electrical structural components of transmission lines,
tanks, and substations. Electrical work falls under classifications like EE-98 or EL-1.*
,Q3. What is the primary purpose of N.M. Admin. Code § 14.10.5 (Minimum
Standards for Electrical Distribution and Transmission Facilities)?
A) To establish color codes for transmission towers.
B) To set minimum crew size for high-voltage work.
C) To adopt standards for customer-owned electrical facilities.
D) To regulate the price of electricity.
Answer: C
*Explanation: NMAC 14.10.5 establishes that the Construction Industries Division (CID)
sets minimum standards for contracting work on all customer-owned electrical
distribution and transmission facilities.*
Q4. According to the New Mexico Construction Industries Division’s guidelines for
GF-8 applicants, what is the minimum number of years of verifiable, hands-on
experience required for the qualifier on the license?
A) One year
B) Two years
C) Three years
D) Four years
Answer: B
*Explanation: The New Mexico GF-8 classification explicitly requires the qualifying agent
to provide proof of two years of experience in the field.*
Q5. A contractor has a valid GF-8 license but is asked to install the electrical
control wiring for a storage tank’s automated valve. Is the contractor legally
permitted to perform this electrical work?
A) Yes, because GF-8 covers all aspects of tank installation.
B) Yes, if the contractor hires a master electrician as an employee.
C) No, the GF-8 license explicitly excludes electrical installation of transformers,
substation electrical components, and other electrical connections.
D) Yes, if the contractor signs a waiver accepting liability.
Answer: C
*Explanation: The GF-8 classification is strictly for non-electrical work. Electrical hookups
require a separate electrical license, such as EL-1 or EE-98.*
Q6. Under NMAC 14.10.5, who has jurisdiction over customer-owned electrical
distribution and transmission facilities in New Mexico?
A) Local utility only
B) Construction Industries Division (CID)
,C) NM State Police
D) Federal Energy Regulatory Commission (FERC)
Answer: B
Explanation: NMAC 14.10.5.6 establishes that the Construction Industries Division (CID) of
the Regulation and Licensing Department sets minimum standards for this work.
Q7. Under New Mexico contractor licensing rules, what is a potential penalty for a
GF-8 contractor knowingly performing work requiring an electrical license?
A) A written warning for the first offense.
B) Suspension or revocation of the license.
C) A mandatory safety class.
D) No penalty if the work passes inspection.
Answer: B
Explanation: Operating outside the scope of your license (practicing without a license for
that trade) can result in disciplinary action including suspension or revocation.
Q8. The New Mexico Construction Industries Division (CID) is part of which state
department?
A) Department of Transportation
B) Regulation and Licensing Department
C) Department of Health
D) Energy, Minerals and Natural Resources Department
Answer: B
Explanation: The CID operates under the New Mexico Regulation and Licensing
Department.
Q9. Which New Mexico regulation generally adopts the National Electrical Safety
Code (NESC) by reference?
A) NMAC 14.10.5
B) NMAC 14.6.4
C) OSHA 1926
D) API 650
Answer: A
Explanation: NMAC 14.10.5 adopts the NESC as the standard for electrical supply and
distribution facilities.
Q10. A GF-8 contractor is preparing a bid for a new natural gas transmission
pipeline. Under NMAC 14.10.5, which is a required component of the construction
, plan?
A) Aesthetic finish requirements.
B) A clear description of safety and construction standards, including dust control and
erosion mitigation.
C) A marketing brochure for the project.
D) A list of potential subcontractors.
Answer: B
Explanation: The rules require the construction plan to describe safety standards and
mitigation measures such as dust control and stormwater pollution prevention.
Q11. What is the standard frequency of AC power in the United States, relevant to
understanding substation operations?
A) 50 Hz
B) 60 Hz
C) 100 Hz
D) 25 Hz
Answer: B
*Explanation: The standard frequency in the US is 60 Hz, which infrastructure built by
GF-8 contractors supports.*
Q12. A GF-8 contractor is performing a tank foundation pour at a substation site.
Which agency has primary jurisdiction over the quality of the concrete and its
compressive strength testing in New Mexico?
A) The local utility company.
B) The U.S. Department of Energy.
C) The Construction Industries Division (CID).
D) The National Electrical Safety Code (NESC) committee.
Answer: C
Explanation: The CID is the enforcing body for construction standards in New Mexico.
Q13. The New Mexico Electrical Safety Code (NMESC) applies to:
A) Only utility-owned transmission lines.
B) All customer-owned electrical distribution and transmission facilities.
C) Only residential wiring.
D) Only low-voltage systems.
Answer: B
*Explanation: NMAC 14.10.5 specifies that the NMESC applies to all contracting work
performed on customer-owned facilities.*
