AO Unit 4 (2026) EXAM QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
4.1 - What are the three ways that gun ammunition can be assembled? -
(ANSWERS)Fixed, Separated, and Separate loading
4.1 - What are the two major categories of ammunition? -
(ANSWERS)Service & Non-Service
4.1 - What is an Ammunition Lot Number - (ANSWERS)Quantity of
Ammunition assembled from uniform components under similar conditions.
4.1 - How are cads actuated (fired)? - (ANSWERS)Percussion, Electrically,
Sympathetically
4.1 - What is the definition of shelf life? - (ANSWERS)An established
amount of time beginning from date of manufacture.
4.1 - What is the definition of installed life? - (ANSWERS)Established
around the time computed from the time the hermetically sealed.
4.2 - What type of targets are General Purpose Bombs used against? -
(ANSWERS)Enemy targets. (Installations, Armament, and personnel, and
,AO Unit 4 (2026) EXAM QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
tactically to provide direct support of our land, sea, and air forces engaged
in offensive or defensive operations.
4.2 - What type of explosive filler is used with the MK 80 series bombs and
what type is used with the BLU-100 series? - (ANSWERS)MK-80: H-6
BLU-100 series: PBXN-109 (insensitive explosive filler)
4.2 - What color are the explosive-loaded BLU-100 series thermally
protected bombs? - (ANSWERS)Olive drab or grey in color.
4.2 - State the purpose of thermal protection. - (ANSWERS)To greatly
increase the "cook-off time."
4.2 - State the distance between the lugs on a MK 83 bomb body. -
(ANSWERS)14 inches apart.
4.2 - The BLU-109A/B has the penetration capability of going through how
many feet of reinforced concrete? - (ANSWERS)4 to 6 feet
, AO Unit 4 (2026) EXAM QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
4.2 - What type of penetrator is the BLU-116A/B designated as? -
(ANSWERS)Advanced Unitary Penetrator (AUP)
4.3 - What is the definition of arming time? - (ANSWERS)The amount of
time or revolutions needed for the firing train to be aligned after the bomb is
released, or from time of release until the bomb is fully armed.
Also known as Safe Separation Time (SST)
4.3 - What advantages do electrical fuses have as opposed to mechanical
fuses? - (ANSWERS)Depending on the delivery mode (retarded/non-
retarded) automatically selects the arming time.
Functioning times are in-flight selectable by the pilot.
Gives the bomb on aircraft capability when used with a proximity sensing
device.
4.3 - What should you do if the lanyard is removed from the MK 122
arming safety switch? - (ANSWERS)Do NOT attempt to reinstall the
lanyard; replace the entire switching unit.
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
4.1 - What are the three ways that gun ammunition can be assembled? -
(ANSWERS)Fixed, Separated, and Separate loading
4.1 - What are the two major categories of ammunition? -
(ANSWERS)Service & Non-Service
4.1 - What is an Ammunition Lot Number - (ANSWERS)Quantity of
Ammunition assembled from uniform components under similar conditions.
4.1 - How are cads actuated (fired)? - (ANSWERS)Percussion, Electrically,
Sympathetically
4.1 - What is the definition of shelf life? - (ANSWERS)An established
amount of time beginning from date of manufacture.
4.1 - What is the definition of installed life? - (ANSWERS)Established
around the time computed from the time the hermetically sealed.
4.2 - What type of targets are General Purpose Bombs used against? -
(ANSWERS)Enemy targets. (Installations, Armament, and personnel, and
,AO Unit 4 (2026) EXAM QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
tactically to provide direct support of our land, sea, and air forces engaged
in offensive or defensive operations.
4.2 - What type of explosive filler is used with the MK 80 series bombs and
what type is used with the BLU-100 series? - (ANSWERS)MK-80: H-6
BLU-100 series: PBXN-109 (insensitive explosive filler)
4.2 - What color are the explosive-loaded BLU-100 series thermally
protected bombs? - (ANSWERS)Olive drab or grey in color.
4.2 - State the purpose of thermal protection. - (ANSWERS)To greatly
increase the "cook-off time."
4.2 - State the distance between the lugs on a MK 83 bomb body. -
(ANSWERS)14 inches apart.
4.2 - The BLU-109A/B has the penetration capability of going through how
many feet of reinforced concrete? - (ANSWERS)4 to 6 feet
, AO Unit 4 (2026) EXAM QUESTIONS AND ALL CORRECT
ANSWERS 100% SOLVED AND GUARANTEED SUCCESS!!
4.2 - What type of penetrator is the BLU-116A/B designated as? -
(ANSWERS)Advanced Unitary Penetrator (AUP)
4.3 - What is the definition of arming time? - (ANSWERS)The amount of
time or revolutions needed for the firing train to be aligned after the bomb is
released, or from time of release until the bomb is fully armed.
Also known as Safe Separation Time (SST)
4.3 - What advantages do electrical fuses have as opposed to mechanical
fuses? - (ANSWERS)Depending on the delivery mode (retarded/non-
retarded) automatically selects the arming time.
Functioning times are in-flight selectable by the pilot.
Gives the bomb on aircraft capability when used with a proximity sensing
device.
4.3 - What should you do if the lanyard is removed from the MK 122
arming safety switch? - (ANSWERS)Do NOT attempt to reinstall the
lanyard; replace the entire switching unit.
