AXIS NETWORKING CERTIFICATION EXAM
Questions and Guide Answers
100% Verified Graded A+
1. Secure transmission of data protocol, sender pings receiver, to make sure all
data was received.
Answer: TCP/IP
2. Temperature contrast in the scene
Answer: When considering a thermal camera, what factors should one consider?
3. Lens that has adjustable focal length, however needs to be manually refo-
cused after change
Answer: Varifocal lens
4. Time of light
Answer: Laser Focus
5. Whens lens format is smaller then sensor format
, Answer: Vignetting
6. Measure of resistance to dust, and water (Order is important) Ik66 is the
base for most axis cameras, but important to remember that ik66 is the most
common. Actual format is solids, then liquids but we are measuring for dust
and water
Answer: IP rating
7. The P frames get larger.
Answer: Why does movement cause bit-rate to increase?
8. Proprietary method in which Axis decreases bandwidth usage, without sacri-
ficing quality or dropping frames. Important to note that only h.254 and h.256
are zip stream compatible, MJPEG is not
Answer: Zip Stream
9. Rating of which a device can withstand mechanical impacts. Anything under IK06
is very fragile
Answer: IK Rating
10. Method in which Panoramic cameras can give you a good picture using
multiple sensors
Answer: Dewarping
, 11. Smog, temperature contrast, and weather or fog
Answer: Deterrent of a Thermal camera
12. Axis Camera Station
Answer: ACS
13. Any camera setting in each individual camera can be pulled and made into a
VAPIX command in ACS. (Axis Camera station)
Answer: VAPIX Commands in ACS
14. Proprietary commands from Axis. Essentially their version of MACROS. It is
comprised of 4 parts, in order
Answer:
Ip address of device, dir (file directory of where target file is located), Argu-
ment (essentially what am i asking for?) and Value (The end result of what I am
asking for, so for example if the Argument was "resolution" my Value would be
"1920x1080"
Answer: VAPIX
15. Session Initiation Protocol
Answer: Basically it does what an old call operator would do, it starts and
makes the connection with the end person/thing. Then once
Questions and Guide Answers
100% Verified Graded A+
1. Secure transmission of data protocol, sender pings receiver, to make sure all
data was received.
Answer: TCP/IP
2. Temperature contrast in the scene
Answer: When considering a thermal camera, what factors should one consider?
3. Lens that has adjustable focal length, however needs to be manually refo-
cused after change
Answer: Varifocal lens
4. Time of light
Answer: Laser Focus
5. Whens lens format is smaller then sensor format
, Answer: Vignetting
6. Measure of resistance to dust, and water (Order is important) Ik66 is the
base for most axis cameras, but important to remember that ik66 is the most
common. Actual format is solids, then liquids but we are measuring for dust
and water
Answer: IP rating
7. The P frames get larger.
Answer: Why does movement cause bit-rate to increase?
8. Proprietary method in which Axis decreases bandwidth usage, without sacri-
ficing quality or dropping frames. Important to note that only h.254 and h.256
are zip stream compatible, MJPEG is not
Answer: Zip Stream
9. Rating of which a device can withstand mechanical impacts. Anything under IK06
is very fragile
Answer: IK Rating
10. Method in which Panoramic cameras can give you a good picture using
multiple sensors
Answer: Dewarping
, 11. Smog, temperature contrast, and weather or fog
Answer: Deterrent of a Thermal camera
12. Axis Camera Station
Answer: ACS
13. Any camera setting in each individual camera can be pulled and made into a
VAPIX command in ACS. (Axis Camera station)
Answer: VAPIX Commands in ACS
14. Proprietary commands from Axis. Essentially their version of MACROS. It is
comprised of 4 parts, in order
Answer:
Ip address of device, dir (file directory of where target file is located), Argu-
ment (essentially what am i asking for?) and Value (The end result of what I am
asking for, so for example if the Argument was "resolution" my Value would be
"1920x1080"
Answer: VAPIX
15. Session Initiation Protocol
Answer: Basically it does what an old call operator would do, it starts and
makes the connection with the end person/thing. Then once
