1|Page
EPA 608 (TYPE II) Exam Actual 2026/2027 || Most
Recent Exam Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers) |
Already Graded A+ | Guaranteed Success!! Newest
Exam | Just Released!!
The EPA regulations require that any appliances
containing more than 50 pounds of refrigerant (except for
commercial & industrial process refrigeration) must be
repaired when the leak rate exceeds _________ of the
charge per year? - Answer-15%
R-410A requires recovery tanks rated for at least? -
Answer-400 psig
After refrigerant liquid has been recovered from a system,
any remaining vapor is? - Answer-Condensed by the
recovery system.
Your recovery/recycling machine has R-502 refrigerant in
it. You now have to recover refrigerant from a unit with R-
22. What must be done before the R-22 refrigerant can be
recovered/recycled? - Answer-Recover as much R-502
,2|Page
from the recovery unit as possible, change filter, &
evacuate.
In a refrigeration system with a TXV (or other type of
throttling device), the component directly following the
condenser is the? - Answer-Receiver
When charging an R-410A system that uses a water-
cooled condenser, you must first charge with vapor to a
pressure of at least________, before switching to liquid
charging. - Answer-120 psig
Recovered refrigerant may contain what? - Answer-1.)
Acids
2.) Moisture
3.) Oils
Your recovery/recycling machine has R-22 refrigerant in it.
You now have to recover refrigerant from a unit with R-
410A. What must be done before your recovery unit can
, 3|Page
be used to recover R-410A? - Answer-1.) The recovery
unit must be EPA certified for use with R-410A.
2.) The recovery tank must be designed for the pressure of
R-410A.
3.) The filter & lubricant in the recovery unit must be
changed, & the recovery unit evacuated.
To recover liquid refrigerant, you must connect one hose
to the? - Answer-Liquid Line.
The proper charging method for blended (non-azeotropic)
refrigerants (400 Series) is to use a remove the charge
from the cylinder as a? - Answer-Liquid
Before using a recovery unit to remove a charge, what
steps should be taken? - Answer-1.) Check service valve
positions.
2.) Check the oil level in the recovery unit.
EPA 608 (TYPE II) Exam Actual 2026/2027 || Most
Recent Exam Actual Complete Real Verified Exam
Questions and Correct Answers (Verified Answers) |
Already Graded A+ | Guaranteed Success!! Newest
Exam | Just Released!!
The EPA regulations require that any appliances
containing more than 50 pounds of refrigerant (except for
commercial & industrial process refrigeration) must be
repaired when the leak rate exceeds _________ of the
charge per year? - Answer-15%
R-410A requires recovery tanks rated for at least? -
Answer-400 psig
After refrigerant liquid has been recovered from a system,
any remaining vapor is? - Answer-Condensed by the
recovery system.
Your recovery/recycling machine has R-502 refrigerant in
it. You now have to recover refrigerant from a unit with R-
22. What must be done before the R-22 refrigerant can be
recovered/recycled? - Answer-Recover as much R-502
,2|Page
from the recovery unit as possible, change filter, &
evacuate.
In a refrigeration system with a TXV (or other type of
throttling device), the component directly following the
condenser is the? - Answer-Receiver
When charging an R-410A system that uses a water-
cooled condenser, you must first charge with vapor to a
pressure of at least________, before switching to liquid
charging. - Answer-120 psig
Recovered refrigerant may contain what? - Answer-1.)
Acids
2.) Moisture
3.) Oils
Your recovery/recycling machine has R-22 refrigerant in it.
You now have to recover refrigerant from a unit with R-
410A. What must be done before your recovery unit can
, 3|Page
be used to recover R-410A? - Answer-1.) The recovery
unit must be EPA certified for use with R-410A.
2.) The recovery tank must be designed for the pressure of
R-410A.
3.) The filter & lubricant in the recovery unit must be
changed, & the recovery unit evacuated.
To recover liquid refrigerant, you must connect one hose
to the? - Answer-Liquid Line.
The proper charging method for blended (non-azeotropic)
refrigerants (400 Series) is to use a remove the charge
from the cylinder as a? - Answer-Liquid
Before using a recovery unit to remove a charge, what
steps should be taken? - Answer-1.) Check service valve
positions.
2.) Check the oil level in the recovery unit.
